Adiabatic couplers: design rules and optimization

Explicit analytic design rules are derived for both 3 dB and full adiabatic couplers. The design rules are in excellent agreement with numerical calculations using the beam propagation method (BPM). It is shown that the length scaling for 3 dB couplers compared to full couplers makes the former more difficult to design. The design for each case is optimized to obtain the upper limit of performance and a comparison is carried out between two different design geometries for both 3 dB and full adiabatic couplers     

Sub-quarter micron silicon integrated circuits and single wafer processing

This paper describes the role of single wafer processing in the development of sub-quarter micron silicon integrated circuits (ICs). The issues related to device processing, choice of materials, performance, reliability, and manufacturing are covered. Single wafer processing based rapid photothermal processing (dominant photons with wavelength less than about 800 nm) is an ideal answer to almost all the thermal processing requirements of current and future Si ICs. For process integration, a new model for process optimization based on minimization of thermal stress is proposed. For breaking the sub-100 nm manufacturing barriers, high throughput lithography based on direct writing is a proposed solution.     

Multi-emitter Si/GexSi1-x heterojunctionbipolar transistor with no base contact and enhanced logic functionality

We demonstrate multi-emitter Si/Ge_xSi_1-x n-p-n heterojunction bipolar transistors (HBT's) which require no base contact for transistor operation. The base current is supplied by the additional emitter contact under reverse bias due to the heavy doping of the emitter-base junction. Large-area HBT test structures exhibit good transistor characteristics, with current gain β≈400 regardless of whether the base current is supplied by a test base electrode or one of the emitter contacts. These devices have enhanced logic functionality because of emitter contact symmetry. Since device fabrication does not require base electrode formation, the number of processing steps can be reduced without significant penalty to HBT performance     

Agenesis of the corpus callosum in a mother and son

Most reported familial cases of agenesis of the corpus callosum have followed either an autosomal recessive or an X-linked recessive pattern of inheritance. To the best of our knowledge, there is only one previous report of a family showing clear-cut autosomal dominant inheritance. We present the second such family, among whom a mother and her son had moderately severe coordination problems and low-normal intelligence. We suggest that agenesis of the corpus callosum, when transmitted as an autosomal dominant trait, is clinically characterized by a relatively milder phenotype than that occurring when inheritance is either autosomal or X-linked recessive and may be more common than has been thought.     

Role of macrophage overactivation in the development of acute pancreatic injury in rats

PURPOSE: To report quantitative changes in the anterior chamber configuration after small-incision cataract surgery with implantation of a posterior chamber intraocular lens by means of ultrasound biomicroscopy. METHODS: We examined the anterior chamber configuration of 20 eyes of 20 patients before and 3 months after small-incision cataract surgery (phacoemulsification and aspiration plus foldable intraocular lens implantation through a 3.0- to 4.0-mm self-sealing wound) by means of ultrasound biomicroscopy. The following variables were measured: the anterior chamber depth at the center of the cornea, the angle-opening distance 250 microns from the scleral spur (AOD250), the angle-opening distance 500 microns from the scleral spur (AOD500), and the trabecular-iris angle. RESULTS: The anterior chamber depth at the center of the cornea, AOD250, AOD500, and trabecular-iris angle increased significantly after surgery. The preoperative anterior chamber depth at the center of the cornea and trabecular-iris angle were negatively correlated with the differences between the postoperative and preoperative values (P < .01). The preoperative values of all variables examined were negatively correlated with the ratios of the postoperative value to the preoperative value (P < .002). CONCLUSIONS: The present results showed that small-incision cataract surgery significantly deepened the anterior chamber and widened its angle. The more shallow the preoperative anterior chamber was, the greater the postoperative change of the chamber was; and the more narrow the preoperative angle was, the greater the postoperative change of the angle was.     

Guidelines for management of left-sided prosthetic valve thrombosis: a role for thrombolytic therapy. Consensus Conference on Prosthetic Valve Thrombosis

OBJECTIVES: We sought to form a consensus recommendation for management of prosthetic valve thrombosis (PVT) from previous case and uncontrolled reports from a consensus of international specialists. BACKGROUND: PVT and thromboembolism relate to inadequate anticoagulation and valve type and location. PVT is suspected by history (dyspnea) and auscultation (muffled valve sounds or new murmurs) and confirmed by Doppler echocardiography showing a marked valve gradient. METHODS: A consensus conference was held to recommend management of left-sided PVT. RESULTS: Transesophageal Doppler echocardiography is used to visualize abnormal leaflet motion and the size, location and mobility of thrombus. Thrombolysis is used for high risk surgical candidates with left-sided PVT (New York Heart Association functional class III or IV) because cerebral thromboembolism may occur in 12% of patients. Duration of thrombolysis depends on resolution of pressure gradients and valve areas to near normal by Doppler echocardiography performed every few hours. Lysis is stopped after 72 or 24 h if there is no hemodynamic improvement (operation indicated). Heparin infusion with frequent measurement of activated partial thromboplastin time (aPTT) begins when aPTT is more than twice control levels and can be converted to warfarin (international normalized ratio [INR] 2.5 to 3.5) plus aspirin (81 to 100 mg/day). Patients in functional class I or II have lower surgical mortality, and those with large immobile thrombi on the prosthetic valve or left atrium have responded to endogenous lysis with combined subcutaneous heparin every 12 h (aPTT 55 to 80 s) plus warfarin (INR 2.5 to 3.5) for 1 to 6 months. Operation is advised for nonresponders or patients with mobile thrombi. CONCLUSIONS: Thrombolysis, followed by heparin, warfarin and aspirin, is advised for high risk surgical candidates with left-sided PVT.     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

Heart transplantation in Finland 1985-1995

BACKGROUND: Clearance of large molecules from the interstitial space is an important function of lymphatics and is affected by local pathologic changes. OBJECTIVE: To determine if the clearance rate of interstitially injected albumin is correlated to tumour characteristics and outcome in women with invasive breast cancer. METHOD: In a consecutive series of women coming to biopsy for suspected breast cancer, technetium-tagged albumin was injected into the tissue adjacent to the palpable mass. The isotope disappearance rate was measured over two hours. Also assessed were the maximum vessel density (MVD-using Factor VIII polyclonal antisera), the proliferation rate (using Ki-67 antisera), node status, tumour size, histologic and nuclear grade, mitotic rate, and p53 and c-erbB-2 oncoproteins. All patients were followed until relapse and for a minimum of 10 years. RESULTS: In multivariate analysis, an association between relapse-free survival and isotope clearance rate was suggested (p = 0.024). The best outcome was seen in patients with the least isotope clearance. Node status, size, histologic and nuclear grade, and mitotic rate correlated with survival. MVD did not correlate with survival and was inversely related to the isotope clearance rate. Tumour proliferation rate, and the c-erbB-2 and p53 oncoproteins did not relate to outcome. CONCLUSION: The role of lymphatics in breast cancer is difficult to study. Measurement of interstitial clearance may be a useful technique and could be a prognostic factor.     

The virtual reality modeling language explained

VRML stands for Virtual Reality Modeling Language. Technically, VRML is neither virtual reality nor a modeling language. Virtual reality generally implies an immersive 3D experience, which typically requires a head mounted display (HMD) and 3D input devices, such as digital gloves. VRML neither requires nor imposes immersion. Furthermore, a true modeling language would contain richer geometric modeling primitives and mechanisms. VRML provides a bare minimum of geometric modeling features but contains numerous features unavailable in a modeling language. If VRML is not virtual reality or a modeling language, what is it? This question has several answers. At its core, VRML serves as a 3D interchange format. It defines most of the commonly used semantics found in today's 3D applications such as hierarchical transformations, light sources, viewpoints, geometry, animation, fog, material properties, and texture mapping. Here's a second answer to: what is VRML? It's a 3D analog to HTML. This means that VRML serves as a simple, multiplatform language for publishing 3D Web pages. The fact that some information, including games, engineering models, scientific visualizations, educational experiences, and architecture, can best be experienced in 3D has motivated this language. Typically, these types of projects require intensive interaction, animation, and user participation and exploration beyond what a page, text, or image based format can handle. Another answer is that VRML provides the technology to integrate 3D, 2D, text, and multimedia into a coherent model