S-N-P curves in 7075 T7351 and 2024 T3 aluminium alloys subjected to surface treatments

The S-N-P (stress, number of cycles, failure probability) curves for 2024 T3 and 7075 T7351 aluminium alloys were obtained. Previously, surface treatments of degreasing and different types of anodizing were applied to samples, evaluating the influence of these treatments on the fatigue life of the alloys. The determination of the S-N-P curves was done using Maennig's method. Rotary fatigue was used because this technique produces greater stress on the sample surfaces, the zone in which it is important to evaluate fatigue resistance. Both the transition range and the finite life range were evaluated, calculating the 1, 50 and 99% fracture probability. SEM was performed in order to characterize the fracture micromechanism. The conclusions were that Maennig's method is useful to evaluate fatigue life of these materials in a fast and efficient manner. Moreover, surface treatments produce a decrease in the fatigue life of both alloys, associating this effect with the surface damage produced on each sample during the treatment.     

Rectus abdominis muscle flap (RAMF) technique for the management of bladder exstrophies: late clinical outcome and urodynamic findings

OBJECTIVE: To investigate the efficacy of the rectus abdominis muscle flap (RAMF) technique for the closure and augmentation of small, non-compliant bladder exstrophies. PATIENTS AND METHODS: The RAMF technique was used in two girls and two boys (mean age at operation, 31.7 months, range 3-72) with bladder exstrophy. The clinical outcome and urodynamics were assessed during a follow-up of 29 months to 6 years (mean 49.2 months) and included imaging, cystoscopy, biochemical and microbiological studies. RESULTS: There were no urinary tract infections, metabolic problems or electrolyte disturbances and kidney function remained normal in all patients. Radiography confirmed intact function and anatomy of the urinary tract and cystoscopy showed complete coverage of the inner peritoneal layer of RAMF with uroepithelium. No stone formation or mucus production were detected. Currently, three patients void using clean intermittent catheterization through the native urethra and the fourth through an appendiceal Mitrofanoff valve. However, the bladder volume was insufficient at the late follow-up and three patients required bladder augmentation. CONCLUSIONS: The RAMF technique is a good alternative for closing bladder exstrophies and achieves an increase in bladder capacity; however, although there is a mild improvement in bladder capacity and compliance. RAMF should not be used as a bladder augmentation procedure. The technique is indicated in the closure of large bladder defects, bladder exstrophies with small, inelastic, non-compliant bladder remnants and failed primary closures.     

A genetic model for undifferentiated cell tumor formation: similar tumors formed by different cell lines transformed by the E1A oncogene

The activation of oncogenes and the mutation/deletion of suppressor genes may be involved in tumor heterogeneity. In an attempt to study tumor heterogeneity, we transformed cell lines from epithelial (PAM 212), mesenchymal (NIH-3T3), or melanocytic origin (L-BIOBR) with the wild type E1a oncogene. To make the cell lines tumorigenic, cells were infected with Harvey sarcoma virus carrying the v-H-ras oncogene. The transformed cells were injected into nude mice and the tumors studied by optical and electron microscopy. The tumors formed by v-H-ras-transformed cells consisted of epitheliod melanomas, spindle cells sarcomas and poorly-differentiated carcinomas, depending on the cell of origin. In contrast, the tumors obtained from cells also carrying the E1a oncogene showed a predominant small and undifferentiated cell pattern regardless of the cell of origin. We conclude that the E1a oncogene products induce a negative control of differentiation, independent of the cell type, and that tumors formed by cells carrying the E1a oncogene display an undifferentiated cell pattern.     

Preparation of flat-polished specimens for SEM-backscattered electron imaging and X-ray microanalysis—importance of epoxy impregnation

Representative and quantitative microstructural information of cement-based materials can be obtained in the backscattered electron and X-ray modes of the scanning electron microscope (SEM). One prerequisite, of several, is to use flat specimens. Microstructures that are minimally affected by the grinding and polishing necessary to produce the flat surface can be obtained. It is essential to fill the pores of the specimen with epoxy resin prior to grinding and polishing. After hardening, the epoxy stabilizes the microstructure and enables it to withstand the stresses of grinding and polishing without alteration. In the present paper, we describe a preparation technique that we consider to have produced excellent polished specimens. The importance of epoxy impregnation is demonstrated.     

Impedance analysis of a phosphatidylcholine-phosphatidylethanolamine system in bilayer lipid membranes

Electrochemical impedance spectroscopy was used for the study of two-component lipid membranes. Phosphatidylcholine (PC) and phosphatidylethanolamine (PE) were to be investigated, because of their presence in biological membranes. Capacitance values of pure components are 0.62 and 0.32 μF cm⁻², respectively. The 1:1 complex was formed during formation of the PC-PE lipid membrane. Formation of the complex can explain the deviation from the additivity rule. This equilibrium was described by mathematical equations and was further verified experimentally. Adequate equations let us calculate such parameters as: capacitance of the complex molecule, area occupied by the complex molecule as well as the stability constant of the complex.     

Polyurethane foams with 1,3‐pyrimidine ring

Attempts of obtaining of polyurethane foams using polyetherols with 1,3‐pyrimidine ring (obtained in reactions of 6‐aminouracil with oxiranes) are reported. Properties of the foams are investigated, especially their thermal stability. The foams show an improved thermal stability up to 200°C for a long time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of the amount of ferromagnetic addition on the rheological properties of spinning solutions,the structure,the strength,and thermal properties of polyacrylonitrile fibres

The rheological properties of spinning solutions of polyacrylonitrile in dimethyl formamide (DMF) containing various amounts of a ferromagnetic nanoaddition were investigated. The porous structure, the strength and thermal properties of fibers obtained from these solutions were assessed, as well as the uniformity of the nanoaddition distribution on the fiber surface was estimated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Spin singlet-triplet states of superfluid Fermi liquids in the presence of strong magnetic fields

The unitary singlet-triplet states of superfluid Fermi liquids are investigated in the presence of strong magnetic fields. The static spin susceptibility is calculated in the limith 0 in the framework of the weak coupling approximation. It is predicted that BS (a mixture of the Balian- Werthamer anisotropic state andD-wave singlet state) and 2DS (a mixture of the planar 2D state andD-wave singlet state) spin singlet-triplet states become stable at some temperatures and magnetic fields.