Cascade delta-sigma modulator with pseudo-differential comparator-based switched-capacitor gain stage

A low-power, multi-stage delta-sigma modulator with comparator-based switched-capacitor (CBSC) gain stages is presented. The presented design eliminates the need for operational amplifiers and replaces them by comparators with current sources at their outputs to alleviate the effects of continued technology scaling on analog and mixed-signal circuits. The proposed technique significantly reduces power consumption and can be applied to switched-capacitor delta-sigma modulators of arbitrary order. Based on the proposed methodology, a 2-1 cascade, single-bit, pseudo-differential switched-capacitor delta-sigma modulator is developed and achieves a SNDR of 76.8 dB with an oversampling ratio of 64 at a clock frequency of 8 MHz.     

Scheduling algorithm for VOQ switches

A variety of matching schemes for VOQ switches that provide high throughput for uniform traffic have been proposed. The dual round robin matching (DRRM) scheme has performance similar to iSLIP and lower implementation complexity. DRRM with exhaustive service (EDRRM) algorithm was created as modification of DRRM algorithm with goal to improve performance of DRRM algorithm for bursty and non-uniform traffic conditions. Under extremely unbalanced arrival traffic, an exhaustive service policy may lead to unfairness and starvation. This paper proposes matching scheme for VOQ switches that provides high throughput almost the same as EDRRM scheme and avoid unfairness and starvation under unbalanced traffic.     

Bulk tank milk somatic cell count as an indicator of the hygiene status of primary milk production

The objective was to clarify the association between bulk tank milk somatic cell count (BTSCC) and total bacterial count (BTTBC) and coliform bacteria count (BTCBC) in a large set of data based on the currently accepted legal limit of BTSCC=400,000/ml. We analysed the database obtained from one of four laboratories offering routine estimation of microbiological indicators and counts of somatic cells in bulk tank milk samples in the Czech Republic during the year 2003 (74,174; 73,921 and 33,020 records of BTSCC, BTTBC and BTCBC estimations, respectively, in milk from 2,769 suppliers). Raw data of BTSCC (with arithmetic mean 220,000/ml; 95th percentile=502,000/ml; 99th percentile=784,000/ml) indicated that the BTSCC limit was exceeded in 12% of samples. BTSCC did not sufficiently reflect the hygiene status of particular producing herds because correlation coefficients between bulk tank milk somatic cell score (BTSCS) and log BTTBC or log BTCBC were low. Categorization of herds according to the percentage of records exceeding the BTSCC limit gave significantly higher correlation coefficients for the association between this characteristic and log BTTBC or log BTCBC (r=0.84 and r=0.68, respectively). The percentage of records exceeding the BTSCC limit was a useful tool to highlight problem herds kept in inadequate hygienic conditions in primary milk production. Likewise, the value of BTSCS>5 seemed to be a useful tool for the discrimination of problem herds.     

Modelling of mercury transport and transformation processes in the Idrijca and Soca river system

In the town of Idrija, Slovenia, the world's second largest mercury mine was active for 500 years and about 37,000 tons of mercury has been lost in the environment. Mercury is still drained from soil, riverbed and floodplains and transported with the Idrijca and Soca Rivers to the Gulf of Trieste. A part of inorganic mercury is methylated either in the river system, or later in the coastal area, and, due to its bioaccumulation and biomagnification represents potential danger to human health. A 1-D aquatic model MeRiMod was used to simulate hydrodynamics and sediment transport in the river system from Idrija to the Soca River mouth. Transport of particle bound and dissolved mercury as well as potential net methylation of mercury in the river system was simulated. The simulation of an observed flood wave with 20-year recurrence period was performed in order to validate the model. Methylation was simulated at lower discharges, as higher methylation rates occur in such conditions. The measurement data and the MeRiMod model were also used to establish a historical mercury mass balance of the Idrijca and Soca Rivers catchment. Sediment core data from the Gulf of Trieste and the measured concentrations from floodplains were used to verify and calibrate the model. Simulations of different high discharges were performed as most of the transport of particulate mercury occurs within flood wave conditions. Compared to the measurements, the results of the model showed an agreement within an order of magnitude, for the transport of total mercury mostly within a factor of 4, and for the methylation within a factor of 5. However, proper trends of the phenomena were obtained by simulations. The combination of modelling and measurements has resulted in some interesting conclusions about the phenomenon of the transport and transformations of mercury in the observed river system.     

Properties of copper matrix reinforced with various size and amount of Al2O3 particles

Copper matrix was reinforced with Al₂O₃ particles of different size and amount by internal oxidation and mechanical alloying accomplished using high-energy ball milling in air. The inert gas-atomised prealloyed copper powder containing 1 wt.% Al as well as a mixture of electrolytic copper powder and 3 wt.% commercial Al₂O₃ powder served as starting materials. Milling of Cu-1 wt.% Al prealloyed powder promoted formation of fine dispersed particles (1.9 wt.% Al₂O₃, approximately 100 nm in size) by internal oxidation. During milling of Cu-3 wt.% Al₂O₃ powder mixture the uniform distribution of commercial Al₂O₃ particles has been obtained. Following milling, powders were treated in hydrogen at 400 °C for 1 h in order to eliminate copper oxides formed at the surface during milling. Compaction was executed by hot-pressing. Compacts processed from 5 to 20 h-milled powders were additionally subjected to high-temperature exposure at 800 °C in order to examine their thermal stability and electrical conductivity. Compacts of Cu-1 wt.% Al prealloyed powders with finer Al₂O₃ particles and smaller grain size exhibited higher microhardness than compacts of Cu-3 wt.% Al₂O₃ powder mixture. This indicates that nano-sized Al₂O₃ particles act as a stronger reinforcing parameter of the copper matrix than micro-sized commercial Al₂O₃ particles. Improved thermal stability of Cu-1 wt.% Al compacts compared to Cu-3 wt.% Al₂O₃ compacts implies that nano-sized Al₂O₃ particles act more efficiently as barriers obstructing grain growth than micro-sized particles. Contrary, the lower electrical conductivity of Cu-1 wt.% Al compacts is the result of higher electron scatter caused by nano-sized Al₂O₃ particles.     

Complementary variational principles with fractional derivatives

Complementary variational principles for a class of fractional boundary value problems are formulated. They are used for the error estimates of solutions for a general mechanical problems, first Painlevé equation also given in the form with fractional derivatives and in the task of image regularization.     

Functionalized diatom silica microparticles for removal of mercury ions

Diatom silica microparticles were chemically modified with self-assembled monolayers of 3-mercaptopropyl-trimethoxysilane (MPTMS), 3-aminopropyl-trimethoxysilane (APTES) and n-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (AEAPTMS), and their application for the adsorption of mercury ions (Hg(II)) is demonstrated. Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy analyses revealed that the functional groups (–SH or –NH₂) were successfully grafted onto the diatom silica surface. The kinetics and efficiency of Hg(II) adsorption were markedly improved by the chemical functionalization of diatom microparticles. The relationship among the type of functional groups, pH and adsorption efficiency of mercury ions was established. The Hg(II) adsorption reached equilibrium within 60 min with maximum adsorption capacities of 185.2, 131.7 and 169.5 mg g⁻¹ for particles functionalized with MPTMS, APTES and AEAPTMS, respectively. The adsorption behavior followed a pseudo-second-order reaction model and Langmuirian isotherm. These results show that mercapto- or amino-functionalized diatom microparticles are promising natural, cost-effective and environmentally benign adsorbents suitable for the removal of mercury ions from aqueous solutions.     

Acidic leaching both of zinc and iron from basic oxygen furnace sludge

During the steel production in the basic oxygen furnace (BOF), approximately 7-15 kg of dust per tonne of produced steel is generated. This dust contains approximately 1.4-3.2% Zn and 54-70% Fe. Regarding the zinc content, the BOF dust is considered to be highly problematic, and therefore new technological processes for recycling dusts and sludge from metallurgical production are still searched for. In this study the hydrometallurgical processing of BOF sludge in the sulphuric acid solutions under atmospheric pressure and temperatures up to 100 °C is investigated on laboratory scale. The influence of sulphuric acid concentration, temperature, time and liquid to solid ratio (L:S) on the leaching process was studied. The main aim of this study was to determine optimal conditions when the maximum amount of zinc passes into the solution whilst iron remains in a solid residue.