SIMULATION OF MICROMIXING IN A TURBULENT TUBULAR REACTOR WITH CONCENTRIC FEED

Turbulence on the axis of a pipe is isotropic and homogeneous and the rate of turbulent energy dissipation, ε, is known as a function of the velocity, pipe diameter and viscosity. When, however, a concentric feed pipe is introduced (as in a reactor), the ε field does not seem to be known. Evidence from fast, mixing-controlled reactions indicates a disturbance near to and downstream from the feed pipe with an increase in ε. Because of the lack of experimental information, the radial and axial distribution of ε has been modeled. One parameter—ε at the outlet of the feedpipe—is undetermined in this model. It is shown how the radial dispersion and especially the micromixing and reaction of fluid emerging isokinetically from the feed pipe can then be calculated, using a one-dimensional, radially averaged formulation. An application to four coupled, mixing-controlled reactions is included. Simulated and measured product distributions compared satisfactorily at various concentration levels and two solution viscosities. Whereas the new model is plausible, more work is needed to understand how a feed pipe modifies the flow in its vicinity.     

Comparisons between antimicrobial pharmacodynamic indices and bacterial killing as described by using the Zhi model

Various suggestions have been made for empirical pharmacodynamic indices of antibiotic effectiveness, such as areas under the drug concentration-time curve in serum (AUC), AUC > MIC, AUC/MIC, area under the inhibitory curve (AUIC), AUC above MIC, and time above MIC (T > MIC). In addition, bacterial growth and killing models, such as the Zhi model, have been developed. The goal of the present study was to compare the empirical behavior of the Zhi model of bacterial growth and killing with the other empirical pharmacodynamic indices described above by using simulated clinical data analyzed with the USC*PACK PC clinical programs for adaptive control of drug therapy, with one model describing a concentration-dependent antibiotic (tobramycin) and another describing a concentration-independent antibiotic (ticarcillin). The computed relative number of CFU was plotted against each pharmacodynamic index, with each axis parameterized over time. We assumed that a good pharmacodynamic index should present a clear and continuous relationship between the time course of its values and the time course of the bacterial killing as seen with the Zhi model. Preliminary work showed that some pharmacodynamic indices were very similar. A good sensitivity to the change in the values of the MIC was shown for AUC/MIC and also for T > MIC. In addition, the time courses of some other pharmacodynamic indices were very similar. Since AUC/MIC is easily calculated and shows more sensitivity, it appeared to be the best of the indices mentioned above for the concentration-dependent drug, because it incorporated and used the MIC the best. T > MIC appeared to be the best index for a concentration-independent drug. We also propose a new composite index, weighted AUC (WAUC), which appears to be useful for both concentration-dependent and concentration-independent drugs.     

Microstructural development and creep deformation in equiaxed γ, γ+α 2, and γ+α 2+B2 titanium aluminides

The development of microstructure and its influence on creep properties have been studied for structures including equiaxed γ, duplex, and other structures of varying α ₂ morphology in two Ti-48Al-2Cr-2Nb alloys. Heat treatments at 1125 °C have been utilized to produce equiaxed γ microstructures in alloys with or without Mo additions. The γ → α transformation produces α ₂ plates with several orientation variants within γ grains during subsequent annealing of the equiaxed γ microstructures below the α transus. Formation of this α ₂ morphology results from rapid up-quenching (UQ), and this structure persists through annealing, cooling, and creep testing. Differences in minimum creep rates for several microstructures containing varying amounts of multi- or single variant γ/α ₂ grains are shown to be minimal. The presence of Mo has also resulted in improved creep resistance in equiaxed γ and γ+α ₂+B2 structures, as compared to similar microstructures in the Ti-48Al-2Cr-2Nb alloy. Deformation during creep at 760 °C at stresses between 200 and 400 MPa occurs by a combination of twinning and dislocation glide without recrystallization, resulting in power-law stress exponents in the range of 6 to 9. Only minimal strain path dependence of the minimum creep rate is detected in a comparison of creep rates in stress jump, stress drop, and single stress tests. This article is based on a presentation made in the symposium “Fundamentals of Gamma Titanium Aluminides,” presented at the TMS Annual Meeting, February 10–12, 1997, Orlando, Florida, under the auspices of the ASM/MSD Flow & Fracture and Phase Transformations Committees.     

Evidence of successful river spawning by lake trout (Salvelinus namaycush) in the Lower Niagara River,Lake Ontario

Restoration of a wild-produced lake trout Salvelinus namaycush population in Lake Ontario has not been successful despite the adult population often meeting or exceeding restoration targets. Lack of high-quality spawning habitat in Lake Ontario is suggested as one impediment to recruitment of wild lake trout, although the quantity and location of spawning habitat is poorly understood. If high-quality spawning habitat is limited in Lake Ontario, lake trout may be using uncommon spawning locations such as rivers. Anecdotal angler accounts point to the Niagara River as a lake trout spawning location. To better understand the potential of the Niagara River as a spawning location, egg and juvenile fish collections were conducted 12–14 river kilometers from the mouth of the Niagara River from 2010 to 2012; and mature female lake trout with surgically implanted acoustic tags were monitored from 2015 to 2019. Genetic analyses confirmed 60% of collected eggs and 93% of collected post-hatch juvenile fish in the Niagara River were lake trout. Tagged female lake trout returned to the Niagara River over consecutive years during the spawning season. The short duration of lake trout presence in the river (mean = 56 days/year) suggests female lake trout use the Niagara River primarily for spawning. Diversity in spawning locations may provide lake trout population’s resilience against environmental variability through a portfolio effect. Improved identification of riverine spawning locations, including their overall contribution to wild recruitment, may be a useful tool for managers to restore a wild-produced population of lake trout in Lake Ontario.     

Intelligent monitor for typhoon in IoT system of smart city

The Journal of Supercomputing - Accidents often occur in the earth—typhoons, floods, earthquakes, traffic accidents and so on. Whether these accidents can be timely and effectively responded...     

Correction to: Non-congruent non-degenerate curves with identical signatures

Journal of Mathematical Imaging and Vision - A correction to this paper has been published: https://doi.org/10.1007/s10851-021-01028-0