Characterization of a lab-scale platinum filament pyrolyzer for studying the fast devolatilization of solid fuels

Platinum filament pyrolyzers achieve very high temperature and heating rate and can provide useful parameters for practical applications in combustion, pyrolysis and gasification processes. The critical use of an experimental instrument is necessary to provide reliable data. In this work, a commercial pyrolyzer (CDS Pyroprobe 2000) is characterized to obtain a correspondence between the nominal and the effective operating conditions. This is the basis for the modeling estimation of the effective thermal history of the sample during each experimental run. The experimental results obtained performing the devolatilization of coals, biomass and waste fuels using the pyrolyzer are compared with those obtained in a conventional thermogravimetric balance, to evaluate the effects of extremely different operating conditions. The amount of volatile released programming the most severe thermal conditions using the pyrolyzer (thus in conditions more similar to large-scale plants) differs significantly from that of thermogravimetric runs. Global kinetics are obtained fitting the experimental results and using the thermal history of the sample from the model results. They depend strongly on the conditions used for the devolatilization. Global kinetics obtained in the thermogravimetric balance runs (low heating rate) overestimate the rate of devolatilization in the pyrolyzer (high heating rate).     

Investigation of defects introduced by static and dynamic hot carrier stress on SOI partially depleted body-contact MOSFETs

SOI partially depleted body-contact MOSFETs were subjected to static and dynamic hot carrier stress. Drain current was investigated by means of Deep Level Transient Spectroscopy and switch-ON transient analysis in a wide temperature range. Under static degradation regime, drain current behaviour was determined by the creation of two discrete traps most likely located in the drain vicinity; a hole trap cited in the literature and a defect of metastable nature. Under dynamic degradation regime, drain current behaviour was determined by body–Si/SiO₂ interface-state generation. Experimental data and fitting results based on stretched exponential law are in accordance.     

In Vitro and In Vivo Pharmaco-Toxicological Characterization of 1-Cyclohexyl-x-methoxybenzene Derivatives in Mice: Comparison with Tramadol and PCP

1-cyclohexyl-x-methoxybenzene is a novel psychoactive substance (NPS), first discovered in Europe in 2012 as unknown racemic mixture of its three stereoisomers: ortho, meta and para. Each of these has structural similarities with the analgesic tramadol and the dissociative anesthetic phencyclidine. In light of these structural analogies, and based on the fact that both tramadol and phencyclidine are substances that cause toxic effects in humans, the aim of this study was to investigate the in vitro and in vivo pharmacodynamic profile of these molecules, and to compare them with those caused by tramadol and phencyclidine. In vitro studies demonstrated that tramadol, ortho, meta and para were inactive at mu, kappa and delta opioid receptors. Systemic administration of the three stereoisomers impairs sensorimotor responses, modulates spontaneous motor activity, induces modest analgesia, and alters thermoregulation and cardiorespiratory responses in the mouse in some cases, with a similar profile to that of tramadol and phencyclidine. Naloxone partially prevents only the visual sensorimotor impairments caused by three stereoisomers, without preventing other effects. The present data show that 1-cyclohexyl-x-methoxybenzene derivatives cause pharmaco-toxicological effects by activating both opioid and non-opioid mechanisms and suggest that their use could potentially lead to abuse and bodily harm.     

Extension of Collagen Deposition in COVID-19 Post Mortem Lung Samples and Computed Tomography Analysis Findings

Lung fibrosis has specific computed tomography (CT) findings and represents a common finding in advanced COVID-19 pneumonia whose reversibility has been poorly investigated. The aim of this study was to quantify the extension of collagen deposition and aeration in postmortem cryobiopsies of critically ill COVID-19 patients and to describe the correlations with qualitative and quantitative analyses of lung CT. Postmortem transbronchial cryobiopsy samples were obtained, formalin fixed, paraffin embedded and stained with Sirius red to quantify collagen deposition, defining fibrotic samples as those with collagen deposition above 10%. Lung CT images were analyzed qualitatively with a radiographic score and quantitatively with computer-based analysis at the lobe level. Thirty samples from 10 patients with COVID-19 pneumonia deceased during invasive mechanical ventilation were included in this study. The median [interquartile range] percent collagen extension was 6.8% (4.6–16.2%). In fibrotic compared to nonfibrotic samples, the qualitative score was higher (260 (250–290) vs. 190 (120–270), p = 0.036) while the gas fraction was lower (0.46 (0.32–0.47) vs. 0.59 (0.37–0.68), p = 0.047). A radiographic score above 230 had 100% sensitivity (95% confidence interval, CI: 66.4% to 100%) and 66.7% specificity (95% CI: 41.0% to 92.3%) to detect fibrotic samples, while a gas fraction below 0.57 had 100% sensitivity (95% CI: 66.4% to 100%) and 57.1% specificity (95% CI: 26.3% to 88.0%). In COVID-19 pneumonia, qualitative and quantitative analyses of lung CT images have high sensitivity but moderate to low specificity to detect histopathological fibrosis. Pseudofibrotic CT findings do not always correspond to increased collagen deposition.     

Proxies and measurement techniques for mineral dust in Antarctic ice cores

To improve quantitative interpretation of ice core aeolian dust records, a systematic methodological comparison was made. This involved methods for water-insoluble particle counting (Coulter counter and laser-sensing particle detector), soluble ion analysis (ion chromatography and continuous flow analysis), elemental analysis (inductively coupled plasma mass spectroscopy at pH 1 and after full acid digestion), and water-insoluble elemental analysis (proton induced X-ray emission). Antarctic ice core samples covering the last deglaciation from the EPICA Dome C (EDC) and the EPICA Dronning Maud Land (EDML) cores were used. All methods correlate very well among each other, but the ratios of glacial age to Holocene concentrations, which are typically a factor approximately 100, differ between the methods by up to a factor of 2 with insoluble particles showing the largest variability. The recovery of ICP-MS measurements depends on the digestion method and is differentfor different elements and during different climatic periods. EDC and EDML samples have similar dust composition, which suggests a common dust source or a common mixture of sources for the two sites. The analyzed samples further reveal a change of dust composition during the last deglaciation.     

Effects of Dihydrotanshinone I on Proliferation and Invasiveness of Paclitaxel-Resistant Anaplastic Thyroid Cancer Cells

ATC is a very rare, but extremely aggressive form of thyroid malignancy, responsible for the highest mortality rate registered for thyroid cancer. In patients without known genetic aberrations, the current treatment is still represented by palliative surgery and systemic mono- or combined chemotherapy, which is often not fully effective for the appearance of drug resistance. Comprehension of the mechanisms involved in the development of the resistance is therefore an urgent issue to suggest novel therapeutic approaches for this very aggressive malignancy. In this study, we created a model of anaplastic thyroid cancer (ATC) cells resistant to paclitaxel and investigated the characteristics of these cells by analyzing the profile of gene expression and comparing it with that of paclitaxel-sensitive original ATC cell lines. In addition, we evaluated the effects of Dihydrotanshinone I (DHT) on the viability and invasiveness of paclitaxel-resistant cells. ATC paclitaxel-resistant cells highlighted an overexpression of ABCB1 and a hyper-activation of the NF-κB compared to sensitive cells. DHT treatment resulted in a reduction of viability and clonogenic ability of resistant cells. Moreover, DHT induces a decrement of NF-κB activity in SW1736-PTX and 8505C-PTX cells. In conclusion, to the best of our knowledge, the results of the present study are the first to demonstrate the antitumor effects of DHT on ATC cells resistant to Paclitaxel in vitro.     

Effects of Lipidation on a Proline-Rich Antibacterial Peptide

The emergence of multidrug-resistant bacteria is a worldwide health problem. Antimicrobial peptides have been recognized as potential alternatives to conventional antibiotics, but still require optimization. The proline-rich antimicrobial peptide Bac7(1-16) is active against only a limited number of Gram-negative bacteria. It kills bacteria by inhibiting protein synthesis after its internalization, which is mainly supported by the bacterial transporter SbmA. In this study, we tested two different lipidated forms of Bac7(1-16) with the aim of extending its activity against those bacterial species that lack SbmA. We linked a C12-alkyl chain or an ultrashort cationic lipopeptide Lp-I to the C-terminus of Bac7(1-16). Both the lipidated Bac-C12 and Bac-Lp-I forms acquired activity at low micromolar MIC values against several Gram-positive and Gram-negative bacteria. Moreover, unlike Bac7(1-16), Bac-C12, and Bac-Lp-I did not select resistant mutants in E. coli after 14 times of exposure to sub-MIC concentrations of the respective peptide. We demonstrated that the extended spectrum of activity and absence of de novo resistance are likely related to the acquired capability of the peptides to permeabilize cell membranes. These results indicate that C-terminal lipidation of a short proline-rich peptide profoundly alters its function and mode of action and provides useful insights into the design of novel broad-spectrum antibacterial agents.     

Monitoring biochemical changes during grape berry development in Portuguese cultivars by NMR spectroscopy

¹H nuclear magnetic resonance (NMR) was applied for the metabolic profiling of grapes from three Portuguese cultivars including ‘Trincadeira’, ‘Aragonês’, and ‘Touriga Nacional’, at four developmental stages. Two kinds of extraction methods including deuterated NMR solvent extraction and solid phase extraction (SPE) were used for the metabolomic analysis and all the metabolites detected in ¹H NMR were elucidated by two-dimensional NMR techniques as well as the in-house NMR chemical shift database. Multivariate data analyses were also performed to identify overall metabolic differences. Trincadeira was found different from the other two cultivars, having low phenolic contents as compared to other cultivars. The initial stages showed comparatively high phenolics and organic acid contents like caftaric and malic acid while the later stages showed higher glucose and fructose levels. Veraison was found to be a metabolically critical stage of berry development. On the basis of these findings distribution of metabolites among different cultivars at different developmental stages is discussed.     

Transition‐Metal Dichalcogenide NiTe2: An Ambient‐Stable Material for Catalysis and Nanoelectronics

By means of theory and experiments, the application capability of nickel ditelluride (NiTe₂) transition‐metal dichalcogenide in catalysis and nanoelectronics is assessed. The Te surface termination forms a TeO₂ skin in an oxygen environment. In ambient atmosphere, passivation is achieved in less than 30 min with the TeO₂ skin having a thickness of about 7 Å. NiTe₂ shows outstanding tolerance to CO exposure and stability in water environment, with subsequent good performance in both hydrogen and oxygen evolution reactions. NiTe₂‐based devices consistently demonstrate superb ambient stability over a timescale as long as one month. Specifically, NiTe₂ has been implemented in a device that exhibits both superior performance and environmental stability at frequencies above 40 GHz, with possible applications as a receiver beyond the cutoff frequency of a nanotransistor.     

A water-soluble,mucoadhesive quaternary ammonium chitosan-methyl-β-cyclodextrin conjugate forming inclusion complexes with dexamethasone

The ocular bioavailability of lipophilic drugs, such as dexamethasone, depends on both drug water solubility and mucoadhesion/permeation. Cyclodextrins and chitosan are frequently employed to either improve drug solubility or prolong drug contact onto mucosae, respectively. Although the covalent conjugation of cyclodextrin and chitosan brings to mucoadhesive drug complexes, their water solubility is restricted to acidic pHs. This paper describes a straightforward grafting of methyl-β-cyclodextrin (MCD) on quaternary ammonium chitosan (QA-Ch60), mediated by hexamethylene diisocyanate. The resulting product is a water-soluble chitosan derivative, having a 10-atom long spacer between the quaternized chitosan and the cyclodextrin. The derivative is capable of complexing the model drug dexamethasone and stable complexes were also observed for the lyophilized products. Furthermore, the conjugate preserves the mucoadhesive properties typical of quaternized chitosan and its safety as solubilizing excipient for ophthalmic applications was preliminary assessed by in vitro cytotoxicity evaluations. Taken as a whole, the observed features appear promising for future processing of the developed product into 3D solid forms, such as controlled drug delivery systems, films or drug eluting medical devices.

Open image in new window