Fourier transform infrared (FTIR) authentication and batch-to-batch consistency for different types of paints using benchtop and handheld FTIR spectrophotometers for oil and gas industry

Standardization of Fourier transform infrared (FTIR) fingerprint region for paints and assessment on the reproducibility using different spectrophotometers were investigated. While selective fingerprint regions may be confusing for technicians/analysts who are non-chemists, we attempt to generalize these regions (e.g., 1300–1000 cm⁻¹ for Epoxy part A and 1400–1000 cm⁻¹ for Epoxy part B) by choosing a universal region (2000–900 cm⁻¹) that works for different paints. Comparison result using a paired student t-test shows that the degree of similarity (r) values from the studied regions are not statistically different. The paint fails the screening analysis occasionally on-site when analyzed using handheld FTIR due to the higher level of noise that gives low r values (r < 0.900 ± 0.002). The same samples were analyzed using a benchtop FTIR and the r values are above 0.900 ± 0.002. While the screening may lead to a false rejection of the sample on-site, there could be occurrence of false acceptance. The on-site screening of EPZ part A with different formulations, for instance, shows that the r values over the entire IR spectrum are above 0.900 ± 0.002 when analyzed using handheld FTIR. After the samples were analyzed using the benchtop, the r values fall below 0.900 ± 0.002.     

What can possibly go wrong? Anticipatory work in space operations

This paper explores how different forms of anticipatory work contribute to reliability in high-risk space operations. It is based on ethnographic field work, participant observation and interviews supplemented with video recordings from a control room responsible for operating a microgravity greenhouse at the International Space Station (ISS). Drawing on examples from different stages of a biological experiment on the ISS, we demonstrate how engineers, researchers and technicians work to anticipate and proactively mitigate possible problems. Space research is expensive and risky. The experiments are planned over the course of many years by a globally distributed network of organizations. Owing to the inaccessibility of the ISS, every trivial detail that could possibly cause a problem is subject to scrutiny. We discuss what we label anticipatory work: practices constituted of an entanglement of cognitive, social and technical elements involved in anticipating and proactively mitigating everything that might go wrong. We show how the nature of anticipatory work changes between planning and the operational phases of an experiment. In the planning phase, operators inscribe their anticipation into technology and procedures. In the operational phase, we show how troubleshooting involves the ability to look ahead in the evolving temporal trajectory of the ISS operations and to juggle pre-planned fixes along these trajectories. A key objective of this paper is to illustrate how anticipation is shared between humans and different forms of technology. Moreover, it illustrates the importance of including considerations of temporality in safety and reliability research.     

Objective evaluation of speech dysfluencies using wavelet packet transform with sample entropy

Dysfluency and stuttering are a break or interruption of normal speech such as repetition, prolongation, interjection of syllables, sounds, words or phrases and involuntary silent pauses or blocks in communication. Stuttering assessment through manual classification of speech dysfluencies is subjective, inconsistent, time consuming and prone to error. This paper proposes an objective evaluation of speech dysfluencies based on the wavelet packet transform with sample entropy features. Dysfluent speech signals are decomposed into six levels by using wavelet packet transform. Sample entropy (SampEn) features are extracted at every level of decomposition and they are used as features to characterize the speech dysfluencies (stuttered events). Three different classifiers such as k-nearest neighbor (kNN), linear discriminant analysis (LDA) based classifier and support vector machine (SVM) are used to investigate the performance of the sample entropy features for the classification of speech dysfluencies. 10-fold cross validation method is used for testing the reliability of the classifier results. The effect of different wavelet families on the classification performance is also performed. Experimental results demonstrate that the proposed features and classification algorithms give very promising classification accuracy of 96.67% with the standard deviation of 0.37 and also that the proposed method can be used to help speech language pathologist in classifying speech dysfluencies.     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

New Hybrid Access Method for Femtocell through Adjusting QoS

The increasing number of mobile users raises issues about coverage extension in some areas such as rural zones, indoor or underground locations： one of suggestion solution to accommodate this growing of mobile user is femtocell. Femtocell have been attracting considerable attention in mobile communications, it is a small base station that install to improve the indoor coverage of a given cellular and to enhance user＇s capacity. Call admission control and resource allocation infemtocell＇s hybrid mode are an essential performance promotion issue. Developing methods for femtocell utilization is very comparative nowadays. The two major limitations of wireless communication are capacity and range. The main contribution of our paper is developing resource allocation scheme that can manage the femocell resources between subscriber （femtocell user） and non-subscriber （macrocell user in order to maximizing the system utilizations, we provide a mechanism that leads to serve more users by admitting more subscribers basing on adjusting QoS of the connected users.     

Buoyancy convection in a cavity with mutually orthogonal heated plates

Buoyancy driven convection in a square cavity induced by two mutually orthogonal arbitrarily placed heated thin plates is studied numerically under isothermal and isoflux boundary conditions. The flow is assumed to be two-dimensional. The coupled governing equations were solved by the finite difference method using the Alternating Direction Implicit technique and Successive Over Relaxation method. The steady state results are depicted in terms of streamline and isotherm plots. It is found that the resulting convection pattern is stronger for the isothermal boundary condition. A better overall heat transfer can be achieved by placing one of the plates far away from the center of the cavity for isothermal boundary condition and near the center of the cavity for isoflux boundary condition.     

Design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture

This paper describes the design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture such as liquid/gas and oil/gas flow which commonly found in chemical columns and industrial pipelines. The information obtained through this research has proven to be useful for further development of ultrasonic tomography. This includes acquiring and processing ultrasonic signals from the transducers to obtain the information of the spatial distributions of liquid and gas in an experimental column. Analysis on the transducers’ signals has been carried out to distinguish between the observation time and the Lamb waves. The information obtained from the observation time is useful for further development of the image reconstruction.     

BSLPSDN: Base station location privacy via software-defined networking (SDN) in wireless sensor networks

Base station's location privacy in a wireless sensor network (WSN) is critical for information security and operational availability of the network. A key part of securing the base station from potential compromise is to secure the information about its physical location. This paper proposes a technique called base station location privacy via software-defined networking (SDN) in wireless sensor networks (BSLPSDN). The inspiration comes from the architecture of SDN, where the control plane is separated from the data plane, and where control plane decides the policy for the data plane. BSLPSDN uses three categories of nodes, namely, a main controller to instruct the overall operations, a dedicated node to buffer and forward data, and lastly, a common node to sense and forward the packet. We employ three kinds of nodes to collaborate and achieve stealth for the base station and thus protecting it against the traffic-analysis attacks. Different traits of the WSN including energy status and traffic density can actively be monitored by BSLPSDN, which positively affects the energy goals, expected life of the network, load on common nodes, and the possibility of creating diversion in the wake of an attack on the base station. We incorporated multiple experiments to analyze and evaluate the performance of our proposed algorithm. We use single controller with multiple sensor nodes and multiple controllers with multiple sensor nodes to show the level of anonymity of BS. Experiments show that providing BS anonymity via multiple controllers is the best method both in terms of energy and privacy.     

Intelligent Machine Learning with Metaheuristics Based Sentiment Analysis and Classification

Sentiment Analysis (SA) is one of the subfields in Natural Language Processing (NLP) which focuses on identification and extraction of opinions that exist in the text provided across reviews, social media, blogs, news, and so on. SA has the ability to handle the drastically-increasing unstructured text by transforming them into structured data with the help of NLP and open source tools. The current research work designs a novel Modified Red Deer Algorithm (MRDA) Extreme Learning Machine Sparse Autoencoder (ELMSAE) model for SA and classification. The proposed MRDA-ELMSAE technique initially performs preprocessing to transform the data into a compatible format. Moreover, TF-IDF vectorizer is employed in the extraction of features while ELMSAE model is applied in the classification of sentiments. Furthermore, optimal parameter tuning is done for ELMSAE model using MRDA technique. A wide range of simulation analyses was carried out and results from comparative analysis establish the enhanced efficiency of MRDA-ELMSAE technique against other recent techniques.