Electricity generation using solar parabolic dish system with thermoelectric generator—An experimental investigation

The present electricity grid installation cost as well as the tariff is quite high in India, particularly remote rural areas, to electrify houses. These problems can be easily solved by installing standalone systems that operate on one of the clean energy sources such as solar energy. An experimental analysis of generating electricity from a thermoelectric generator (TEG) powered by a solar parabolic dish concentrator device with aperture area and focal length of 12.6 m² and 2.42 m, respectively, is presented in this article. A TEG is made up of a thermoelectric module connected to a flat receiver by an absorber layer. The studies were carried out in Indian climatic conditions at the National Institute of Technology, Puducherry. Over a spectrum of beam radiation, the system's maximum energy conversion efficiency, as well as efficient electrical output, are evaluated and presented. The proposed system's average effective electrical efficiency is 0.424%, corresponding to the TEG's average energy conversion efficiency of 2.76%.     

Heat and mass transport performance of MHD elastico-viscous fluid flow over a vertically oriented magnetized surface with magnetic and thermo diffusions

The key objective in this study is to examine the heat and mass transport behavior of magnetohydrodynamic elastic-viscous fluid flow over a vertically oriented magnetized surface placed in a uniform permeable regime with magnetic and thermo diffusions. The fluid is partially ionized and permeated to flow in the presence of a strong magnetic field domain. Hence the Hall current effect is considered in this investigation. The significance of rotation and induced magnetic field on the flowing nature are also scrutinized in this study. The mathematical model of the problem is converted to a similar model by introducing suitable nondimensional variables. To obtain the closed-form solutions of the flow leading equations, the regular perturbation analysis is utilized. For the exhibition of results, figures and tables are generated with the assistance of scientific computation software MATHEMATICA. Computed results are validated with the existing result in the limiting case. Such an investigation is important in evaluating the flow characteristics of low magnetic diffusive viscoelastic fluid. A noteworthy result seen is that magnetic diffusion significantly controls the fluid flow by altering the magnetic drag force. Mass diffusion factor brings an increase in the fluid velocity. Furthermore, we observed that the surface current density along the principal flow direction is significantly reduced by magnetic diffusion and mass diffusion factor.     

Experimental and Morphological Investigations Into Electrical Discharge Surface Grinding (EDSG) of 6061Al/Al2O3p 10% Composite by Composite Tool Electrode

In this study, a special experimental setup of EDSG using EDM and surface grinding machine has been developed in the laboratory to investigate the effect of seven input parameters namely tool polarity, peak current, pulse on-time, pulse off-time, rotational speed, abrasive particle size, and abrasive particle concentration on material removal rate (MRR) as performance measure of the process. The novelty of the present research work is that successful efforts have been made to machine the 6061Al/Al₂O_3p 10% metal matrix composites (MMC) by composite tool itself. The copper-based composite tool electrodes were fabricated by powder metallurgy route with different sizes of abrasives of silicon carbide, while 6061Al/Al₂O_3p 10% MMC were fabricated through stir-casting process. The research outcome will identify the important parameters and their effect on MRR of 6061Al/Al₂O_3p 10% composite in EDSG. The experimental results reveal that tool polarity, peak current, and rotational speed are the most influential parameters that affect MRR in EDSG process. The micro-structural and morphological analysis of machined surfaces has also been carried out to analyze the surface topography. It has been concluded that the abrasive particles substantially improves the MRR after removing the resolidified layer from the machined surface.     

Synthesis and Characterization of Silver Nanoparticles and Silver Inks: Review on the Past and Recent Technology Roadmaps

The synthesis of silver nanoparticles for silver ink formation has attracted broad interest in the electronic part printing and semiconductor chip industry due to the extraordinary electrical and mechanical properties of these materials. The preparation of silver nanoparticles through a physical or chemical reduction process is the most common methodology applied to obtain nanoparticles with the required size, shape and surface morphology. The chemical solution or solvent carrier applied for silver ink formulation must be applied simultaneously with the direct writing technique to produce the desired adherence, viscosity, and reliable performance. This review paper discusses the details concerning the past and recent advancement of the synthesis and characterization of silver nanoparticles and silver ink formation. A review on the advantages of various sintering techniques, which aim to achieve the electrical and mechanical properties of the required printed structure, is also included. A brief summary concerning the recent challenges and improvement approaches is presented at the end of this review.     

Corrosion Behavior of Bare,Cr3C2-25%(NiCr), and Cr3C2-25%(NiCr)+0.4%CeO2-Coated Superni 600 Under Molten Salt at 900 °C

Cr₃C₂-25(NiCr) and Cr₃C₂-25(NiCr)+0.4%CeO₂ coatings were deposited on nickel-based superalloy Superni 600 by Detonation-gun technique. Studies were conducted on bare and coated alloys in molten salt environment (Na₂SO₄-25%NaCl) at 900 °C under cyclic condition. Characterization of the corrosion product was done using field emission scanning electron microscopy/energy dispersive spectroscopy and x-ray diffraction techniques. The bare Superni 600 shows penetration of corrosion beneath the metal layer thereby indicating internal oxidation. The coating of Cr₃C₂-25(NiCr) with 0.4%CeO₂ leads to the formation of adherent scale.     

Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel

The effect of ultrasonic shot peening (USSP) was studied on microstructural modification and mechanical properties such as microhardness, yield strength, tensile strength, and low cycle fatigue (LCF) life of a nitrogen stabilized austenitic stainless steel, at room temperature. There was grain refinement up to nano scale in surface region of the shot peened specimens and the microhardness was increased markedly up to the depth of approximately 100 µm. There was insignificant increase in yield and tensile strength, but drastic reduction in LCF life, particularly at low strain amplitude, from USSP. The nominal increase in yield and tensile strength was due to grain refinement in the surface region and drastic fall in LCF life was due to surface cracking resulting from USSP.     

Corrosion Behavior of 9Cr-1Mo Steel in Sulfur Dioxide Environment

Corrosion behavior of annealed 9Cr-1Mo steel was studied in SO₂ environment at 1173 K, at flow rates from 8.33 × 10^?7 to 33.33 × 10^?7 m³/s, and parabolic rate law was followed. The rate constants were found to be independent of flow rate, within the range of flow rate investigated. Corrosion at temperatures from 973 to 1173 K, at a constant flow rate of 16.66 × 10^?7 m³/s, at 1 atmospheric pressure, for 6 h also exhibited parabolic law, however, the rate constants were observed to increase significantly with rise in temperature. The outer layer of the scale formed at 973 K was essentially of iron oxide, with small amount of chromium oxide whereas the inner layer was predominantly of chromium sulphide and chromium oxide. The scale formed at 1173 K was multilayered, in contrast to double layered formed at 973 K and 1073 K. The outer thick layer of the scale formed at 1173 K, consisted of iron oxide followed by thin substrate of chromium sulphide, iron sulphide/iron oxide, and chromium sulphide/chromium oxide toward the substrate. A model is proposed for the process of corrosion of 9Cr-1Mo steel in SO₂ environment, based on the present investigation.     

Ternary polymer electrolyte with enhanced ionic conductivity and thermo-mechanical properties for lithium-ion batteries

Cellulose is the main building block of plant's cell wall that provides structural stability. This idea inspired us to use modified cellulose (Networked cellulose) to provide thermal and mechanical stability to a polymer electrolyte system. The system composed of polyethylene glycol (PEG) (or tetraethylene glycol dimethyl ether (TEGDME)), polyethylene oxide (PEO), networked cellulose (NC) and LiClO₄ as a salt. The PEG (or TEGDME) was used as a high mobility phase for lithium ions, PEO acted as a binder and NC provided structural support for the quasi-solid polymer electrolytes. A high conductivity of the order of 10⁻⁴ S cm⁻¹ was obtained at room temperature. Dynamic mechanical analysis of PEG (or TEGDME):PEO:NC (70:20:10 wt%) showed an improvement of storage modulus as compared to the pristine PEO in the 60–120 °C temperature range. Differential scanning calorimetry (DSC)/Thermal gravimetry analysis (TGA) revealed that the developed ternary polymer electrolyte is thermally stable in the lithium-ion battery operational temperature range.     

Effect of microwave pretreatment of mixed culture on biohydrogen production from waste of sweet produced from Benincasa hispida

To enhance the production of biohydrogen from biomass, various pretreatment methods play important role. In this study, effect of microwave irradiation on the culture was studied on biohydrogen production from Benincasa hispida (Petha) solid waste at different powers for a fixed interval of time. The highest power studied was 800 W with a frequency of 2450 MHz. The amount of soluble sugars found in the waste was 13.9 mg/L having the chemical oxygen demand (COD) of 3000 mg/L. Studies have been performed in batch reactors using mixed consortia and results were also compared with the reactor operated at the normal conditions i.e. without any inoculum pretreatment. Maximum hydrogen produced was 14 mmol H₂ per mol of soluble sugar consumed in the reactor in which the inoculum was exposed to 320 W of microwave for 5 min. SEM analysis of this microwave pretreated culture was done.