Formation of compositional gradient in Al/SiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods

Formations of graded distribution of SiC ceramic particles within the hollow cylindrical shaped Al/SiC functionally graded materials (FGMs) fabricated by centrifugal solid-particle method (CSPM) and centrifugal mixed-powder method (CMPM) under huge centrifugal force are experimentally and theoretically investigated. The movement of SiC ceramic particles in viscous liquid under centrifugal force is explained based on Stoke's law. The effect of compositional gradient of particles on viscosity is taken into account. Also, the effect of temperature distribution on viscosity and density are considered. A computer code to simulate the formation of compositional gradient in the Al/SiC FGMs fabricated by CSPM and CMPM is developed. From the results, it is found that the volume fraction of SiC ceramic particles can be graded from the inner to the outer surface of hollow cylindrical shaped Al/SiC FGMs by CSPM. Meanwhile by CMPM, the SiC ceramic particles can be dispersed on the outer surface of hollow cylindrical shaped Al/SiC FGMs. The graded distribution in Al/SiC FGMs under huge centrifugal force is found to be significantly affected by the mold temperature but less affected by the temperature of molten Al and casting atmosphere.     

Effects of customer response to fashion product stockout on holding costs,order sizes,and profitability in omnichannel retailing

In retailing practice, customers may actively respond in one of the following ways after experiencing stockout of a preferred brand: switch to a substitutable brand, switch to another store (where the preferred brand could be available), or delay purchase (backlogging). This paper presents a model of active customer responses to stockout of fashion products. In the single‐period model, a retailer maximizes profit by selling two substitutable brands through two different stores. Analytical results and numerical experiments suggest that active response to stockout increase the retailer's profitability due to (a) additional revenue from backlogging and brand and store switching and (b) decrease in optimal order size resulting in lower holding costs. Omnichannel fulfillment offers additional opportunities for retailers to benefit from active responses to stockout.     

Allelopathy of oats. II. Allelochemical effect ofl-Tryptophan and its concentration in oat root exudates

l-Tryptophan caused growth inhibition of roots and hypocotyls (or coleoptiles) of cockscomb (Amaranthus caudatus L.), lettuce (Lactuca sativa L.), cress (Lepidium sativum L.), timothy (Phleum pratense L.), rice (Oryza sativa L.), wheat (Triticum aestivum L.), and oat (Avena sativa L.), increasing the dose ofl-tryptophan increased the inhibition. The concentrations for 50% inhibition of the root growth were 0.14, 0.15, 0.21, 0.79, 0.95, 1.7, and 2.4 mM for cockscomb, cress, lettuce, timothy, rice, wheat, and oat, respectively; the concentrations for 40% inhibition of the hypocotyl (or coleoptile) growth were 0.28, 0.33, 0.43, 2.7, 4.5, 7.2, and 15 mM for cockscomb, cress, lettuce, timothy, rice, wheat and oat, respectively. The levels ofl-tryptophan in oat seedlings and in its root exudates were 29.3 mg/kg fresh wt and 0.25 mM under light conditions, and 21.1 mg/kg fresh wt and 0.18 mM under dark conditions, respectively. The presence ofl-tryptophan in the root exudates coupled with its effect on growth suggested thatl-tryptophan may play an important role in the growth inhibition of other plants in nature.     

<Emphasis Type="Italic">In Situ</Emphasis> Study of Reduction Process of CuO Paste and Its Effect on Bondability of Cu-to-Cu Joints

A bonding method utilizing redox reactions of metallic oxide microparticles achieves metal-to-metal bonding in air, which can be alternative to lead-rich high-melting point solder. However, it is known that the degree of the reduction of metallic oxide microparticles have an influence on the joint strength using this bonding method. In this paper, the reduction behavior of CuO paste and its effect on Cu-to-Cu joints were investigated through simultaneous microstructure-related x-ray diffraction and differential scanning calorimetry measurements. The CuO microparticles in the paste were gradually reduced to submicron Cu₂O particles at 210–250°C. Subsequently, Cu nanoparticles were generated instantaneously at 300–315°C. There was a marked difference in the strengths of the joints formed at 300°C and 350°C. Thus, the Cu nanoparticles play a critical role in sintering-based bonding using CuO paste. Furthermore, once the Cu nanoparticles have formed, the joint strength increases with higher bonding temperature (from 350°C to 500°C) and pressure (5–15 MPa), which can exceed the strength of Pb-5Sn solder at higher temperature and pressure.     

Evaluation of the impact of bioaugmentation and biostimulation by in situ hybridization and microelectrode

Three rotating disk biofilm reactors were operated to evaluate whether bioaugmentation and biostimulation can be used to improve the start-up of microbial nitrification. The first reactor was bioaugmented during start-up period with an enrichment culture of nitrifying bacteria, the second reactor received a synthetic medium containing NH(4)(+) and NO(2)(-) to facilitate concomitant proliferation of ammonia- and nitrite-oxidizing bacteria, and the third reactor was used as a control. To evaluate the effectiveness of bioaugmentation and biostimulation approaches, time-dependent developments of nitrifying bacterial community and in situ nitrifying activity in biofilms were monitored by fluorescence in situ hybridization (FISH) technique and microelectrode measurements of NH(4)(+), NO(2)(-), NO(3)(-), and O(2). In situ hybridization results revealed that addition of the enrichment culture of nitrifying bacteria significantly facilitated development of dense nitrifying bacterial populations in the biofilm shortly after, which led to a rapid start-up and enhancement of in situ nitrification activity. The inoculated bacteria could proliferate and/or survive in the biofilm. In addition, the addition of nitrifying bacteria increased the abundance of nitrifying bacteria in the surface of the biofilm, resulting in the higher nitrification rate. On the other hand, the addition of 2.1mM NO(2)(-) did not stimulate the growth of nitrite-oxidizing bacteria and did inhibit the proliferation of ammonia-oxidizing bacteria instead. Thus, the start-up of NO(2)(-) oxidation was unchanged, and the start-up of NH(4)(+) oxidation was delayed. In all the three biofilm reactors, data sets of time series analyses on population dynamics of nitrifying bacteria determined by FISH, in situ nitrifying activities determined by microelectrode measurements, and the reactor performances revealed an approximate agreement between the appearance of nitrifying bacteria and the initiation of nitrification activity, suggesting that the combination of these techniques was a very powerful monitoring tool to evaluate the effectiveness of bioaugmentation and biostimulation strategies.     

In situ bioremediation of a cis-dichloroethylene-contaminated aquifer utilizing methane-rich groundwater from an uncontaminated aquifer

At a trichloroethylene (TCE)-contaminated site in Chikura, Chiba, Japan, TCE had spread over to the first and second aquifers over years. After 8 years of pumping and treatment, finally derivative of TCE, cis-dichloroethylene (c-DCE) remained only in the second aquifer. In this study, feasibility of a low cost in situ bioremediation utilizing groundwater of the third aquifer, which contained natural dissolved methane possibly derived from natural gas field nearby, to stimulate methane-oxidizing bacteria was examined. In vitro experiment showed that a mixture of the groundwater from the second and third aquifers stimulated a growth of methane oxidizing bacteria and enhanced c-DCE degradation. The groundwater of the third aquifer was introduced into the second aquifer in situ. The population of methanotrophs with high V(max) and K(m) for methane uptake increased, resulting in successful degradation of c-DCE at a monitoring well 2m downgradient of the injection well.     

Changes in dietary bioaccumulation of tributyltin chloride (TBTCl) in red sea bream (Pagrus major) with the concentration in feed

The effect of the concentration of tributyltin (TBT) in feed on the dietary bioaccumulation of tributyltin chloride (TBTCl) was studied in an 8-week uptake experiment and a 4-week elimination experiment using red sea bream (Pagrus major). The biomagnification factor (BMF) and the assimilation efficiency (AE) decreased from 0.30 to 0.15 and from 13% to 5.9%, respectively, as the TBT concentration in feed increased from 1.3 to 20 microg/g. The elimination rate constant (k(2)) was independent of the TBT concentration in the fish. Laboratory measurements of the BMF and AE of TBTCl underestimate actual field values if highly contaminated feed is used. Judging from the BMF and AE, the risk of the bioaccumulation of TBTCl through the food chain might be smaller than that of polychlorinated biphenyls.     

Determination of potent antisense oligonucleotides in vitro by semiempirical rules

The selection of effective antisense target sites on a given mRNA molecule is a major problem in the detection of target mRNA in oligonucleotide arrays. In general, antisense oligodeoxynucleotides (asODNs) of about 10-20 nucleotides (nt) in length are used. However, the demand for predicting the sequence of potent asODNs much longer than those mentioned above has been increasing. Here, we prepared 40-nt asODNs directed against fluorescence-labeled green fluorescent protein (GFP) mRNA and quantified their hybridization efficiencies by fluorescence microscopy. We found that the hybridization efficiency depended on the TC content or the minimum free energy of the asODNs. On the basis of these findings, a semiempirical parameter called accessibility score was introduced to predict the potency of asODNs. The results of this study aided in the development of an effective two-step procedure for determining mRNA accessibility, namely, the computer-aided selection of asODN binding sites using an accessibility score followed by an experimental procedure for measuring the hybridization efficiencies between the selected asODNs and the target mRNA by fluorescence microscopy.     

INTERMETALLIC COMPOUNDS AND THEIR FORMATION REACTIONS IN SYSTEM Fe-Cr-Mo AT HIGH-TEMPERATURES

The stable ranges concerning the composition and temperature have been experimentally de-termined for the intermetallic compounds in system Fe-Cr-Mo at high-temperatures. Theisothermal section of the Fe-Cr-Mo ternary phase diagram at 1250℃ and the formation re-actions for the intermetallic compounds, which are different in part from those shown in theliterature, have been proposed.