Analysis of multiple FSS screens of unequal periodicity using an efficient cascading technique

In this paper, we present an efficient cascading procedure for analyzing frequency selective surface (FSS) systems consisting of multiple FSS screens of unequal periodicity embedded in multiple dielectric layers. In this procedure, we first find a global period for the FSS system by studying the composite in its entirety. Next, we compute the scattering matrix [S] of each of the FSS subsystems for the global Floquet harmonics by applying a relationship we establish that maps the [S] matrix of the subsystem for the individual Floquet harmonics to that for the global harmonics. This mapping-cum-filling process substantially reduces the effort needed to compute the [S] matrix of a subsystem. Finally, we compute the [S] of the entire system by applying a modified cascading formulation, in which one matrix inversion step is eliminated, resulting in a reduction in the total computing resource requirement as well as time. Two numerical examples are given to illustrate the efficiency and effectiveness of the technique.     

软β核素内部样品塑料闪烁探测器

本文评价了塑料闪烁片用作软β核素探测器时的计数效率、β谱、本底谱和康普顿电子谱的特征。文中强调:采用胶合光导剂构成的系统是一种新型探测器(软β核素内部样品塑料闪烁探测器)。本文提出内部样品固体探测器、胶合光导剂和胶合闪烁光导剂的新概念。     

Influence of CYP3A5 polymorphism on tacrolimus blood concentrations in renal transplant patients

Objective Tacrolimus is an immunosuppressive drug with narrow therapeutic range and wide interindividual variation in its pharmacokinetics. Tacrolimus is a substrate of cytochrome P450(CYP)3A5. The aim of this study was to evaluate whether the A6986G polymorphism is associated with tacrolimus concentration /dose ratio. Methods Fifty-two Chinese renal transplant patients were enrolled in this study. Their body weight, dosage and concentration of tacrolimus were observed. CYP3A5 genotype was determined by polymerase chain reaction followed by restriction fragment length polymorphism analysis. Results A significant association was found between tacrolimus levels per dose/kg/d and CYP3A5 gene A6986G polymorphism (P<0.001). The CYP3A5 * 3 * 3 patients have a significantly higher tacrolimus level/dose than CYP3A5 * 1 * 1 and CYP3A5 * 1 * 3. Conclusions CYP3A5 gene A6986G polymorphism is associated with tacrolimus pharmacokinetics and dose requirements. Pharmacogenetic methods could be employed prospectively to help the dose selection and to individualize immunosuppressive therapy according to the result. Foundation item: Project (03GZ3072) supported by the Science and Technology Department of Hunan Province; project (2004035206) supported by the China Postdoctoral Foundation and project (30300383) supported by the National Natural Sciences Foundation of China     

Equivalent circuit model of on-wafer CMOS interconnects for RFICs

This paper investigates the properties of the on-wafer interconnects built in a 0.18-/spl mu/m CMOS technology for RF applications. A scalable equivalent circuit model is developed. The model parameters are extracted directly from the on-wafer measurements and formulated into empirical expressions. The expressions are in functions of the length and the width of the interconnects. The proposed model can be easily implemented into commercial RF circuit simulators. It provides a novel solution to include the frequency-variant characteristics into a circuit simulation. The silicon-verified accuracy is proved to be up to 25 GHz with an average error less than 2%. Additionally, equivalent circuit model for longer wires can be obtained by cascading smaller subsections together. The scalability of the propose model is demonstrated.     

钢筋砼结构可靠度的研究

本文简要介绍钢筋砼结构可靠度分析方法、砼与钢筋设计强度取值及抗力计算公式的合理化。     

A new distributed approximation algorithm for constructing minimum connected dominating set in wireless ad hoc networks

In recent years, constructing a virtual backbone by nodes in a connected dominating set (CDS) has been proposed to improve the performance of ad hoc wireless networks. In general, a dominating set satisfies that every vertex in the graph is either in the set or adjacent to a vertex in the set. A CDS is a dominating set that also induces a connected sub‐graph. However, finding the minimum connected dominating set (MCDS) is a well‐known NP‐hard problem in graph theory. Approximation algorithms for MCDS have been proposed in the literature. Most of these algorithms suffer from a poor approximation ratio, and from high time complexity and message complexity. In this paper, we present a new distributed approximation algorithm that constructs a MCDS for wireless ad hoc networks based on a maximal independent set (MIS). Our algorithm, which is fully localized, has a constant approximation ratio, and O(n) time and O(n) message complexity. In this algorithm, each node only requires the knowledge of its one‐hop neighbours and there is only one shortest path connecting two dominators that are at most three hops away. We not only give theoretical performance analysis for our algorithm, but also conduct extensive simulation to compare our algorithm with other algorithms in the literature. Simulation results and theoretical analysis show that our algorithm has better efficiency and performance than others. Copyright © 2005 John Wiley & Sons, Ltd.     

聚苯硫醚复合涂层的耐磨性能

研究了用固体润滑石墨、碳化硅、二硫化钼等填料改性的聚苯硫醚 (PPS)涂层的耐磨性能。实验结果表明 ,聚苯硫醚复合涂层具有优良的耐磨性 ;加入适量 ( 3 0 % )的石墨、碳化硅等固体润滑剂 (石墨 :碳化硅 =2∶3 ) ,可以有效提高涂层的耐磨性能 ,而二硫化钼和三氧化二铬的减摩效果更佳     

Asymmetric Regulation System Fit for Chinese Telecom Market

After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively short term.This paper reviewed the asymmetric regulation policies and practices carried out in foreign telecom market,and then according to the specific situations of Chinese telecom market,proposed the principles and corresponding policies for establishing an asymmetric regulation system fit for Chin...     

面向嵌入式系统组态工具的研究

本文在对当前流行的组态软件进行了分析的基础上，根据专用嵌入式系统的特点，设计了一个面向嵌入式系统组态工具的软件原型，并给出了相应的数据结构。     

管内装元件强化传热的技术经济评价

提出了一种管内装元件强化传热的技术经济评价方法，此方法综合考虑了强化换热器管内传热膜系数的提高和管内流体阻力的增大，与普通的管壳式换热器相比，所带来的投资费用和使用费用变化，这个变化量可用净现值增量△NPV来表示。根据△NPV值来评价强化传热技术，从而为强化传热技术的开发和推广及进行决策提供指导。