Two-level optimal output feedback stabilizer design

The paper addresses the design of two-level power system stabilizers using an optimal reduced order model whose state variables are torque angles and speeds. The reduced order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interactions. The effectiveness of this controller is evaluated and a multimachine system is given as an example to illustrate the advantages of the proposed method. Responses of the system with a two-level scheme and an optimal reduced order scheme are included for comparative analysis.     

Degradation of junction leakage in devices subjected to gateoxidation in nitrous oxide [MOS transistors]

Nitrided gate oxides offer several electrical and reliability advantages over conventional oxides and also provide a good barrier against impurity diffusion. Oxidation in nitrous oxide (N₂O) has been very successful in overcoming some of the problems associated with nitridation in ammonia. The authors have observed that the extent of N₂O oxidation has a strong detrimental effect on the drain leakage current of MOS transistors in the off state. This phenomenon has been identified to be caused by an increase in the active area junction leakage current     

Multi-H phase-coded modulations with asymmetric modulationindexes

Multi-H phase-coded modulation (MHPM) is a bandwidth-efficient modulation scheme which offers substantial coding gain over conventional digital modulation schemes. MHPM with asymmetric modulation indices corresponding to the bipolar data +1 and -1 is considered, and numerical results for the minimum Euclidean distances are provided. It is shown that performance improvements on the error probability over conventional MHPM are gained with essentially the same bandwidth and a very slight modification in implementation. The upper bounds on the error probabilities as functions of observation intervals and received E_b/N₀ are also investigated in detail. It is concluded that the concept of asymmetric modulation indices for MHPM is attractive for bandwidth and power-efficient modulation     

Patient thermal comfort requirement for hospital environments in Taiwan

This study examines the comfort criteria of ASHRAE Standard 55-2004 for their applicability in hospital environments. Through an extensive field survey conducted in a university hospital in Taiwan, 927 sets of data have been collected. Above half of the measured samples failed to meet the specifications of Standard 55 comfort zone due to improper humidity control. Acceptability votes by patients exceeded the Standard's 80% criterion, regardless of whether the physical conditions were in or out of the comfort zone. Thermal neutrality, preference and comfort range are compared with other studies conducted in office environments and Standard 55 criteria. Results of chi-square tests revealed that patients’ physical strength significantly effected their thermal requirements. The net effect of health yields a marked difference in thermal neutrality and preference, and also in the comfortable temperature range.     

I-WAP: an intelligent WAP site management system

The popularity regarding wireless communications is such that more and more WAP sites have been developed with wireless markup language (WML). Meanwhile, to translate hypertext markup language (HTML) pages into proper WML ones becomes imperative since it is difficult for WAP users to read most contents designed for PC users via their mobile phone screens. However, for those sites that have been maintained with hypertext markup language (HTML), considerable time and manpower costs will be incurred to rebuild them with WML. In this paper, we propose an intelligent WAP site management system to cope with these problems. With the help of the intelligent management system, the original contents of HTML Web sites can be automatically translated to proper WAP content in an efficient way. As a consequence, the costs associated with maintaining WAP sites could be significantly reduced. The management system also allows the system manager to define the relevance of numerals and keywords for removing unimportant or meaningless contents. The original contents will be reduced and reorganized to fit the size of mobile phone screens, thus reducing the communication cost and enhancing readability. Numerical results gained through various experiments have evinced the effective performance of the WAP management system.     

Development of a thermal hydraulic analysis code for gas-cooled reactors with annular fuels

Gas-cooled reactors have been highlighted as a promising option for next generation reactor technology. A thermal hydraulic analysis code for gas-cooled reactors has been developed with a heat transfer model of a block element, which is solved implicitly with the helium energy equation. Validation was carried out through comparison with both experimental and analytical results. A computation module for annular fuel rods has been coupled to the code for comparative analyses of an annular fuel-based block element. At normal operation, the annular fuel shows 80 °C lower peak temperature than the solid fuel for the same power in Japan's high temperature engineering test reactor (HTTR), even though the pressure drop is higher in the annular fuel.     

Decision-directed maximum-likelihood estimation of OFDM framesynchronisation offset

The authors propose a method to estimate the synchronisation offset for orthogonal frequency division multiplexing (OFDM) frame alignment without resort to pilot tones. A decision-directed maximum-likelihood estimation of frame synchronisation offset is derived, and the performance of the proposed scheme is confirmed by computer simulation for QAM systems     

Classification of pixels in a noisy grayscale image of polar ice

Often, in synthetic aperture radar (SAR) images of polar ice, one encounters shadow-like features across the images. Such features make it difficult to classify pixels into ice and water. Accordingly, it becomes a challenge to determine the true size and boundaries of ice floes in an SAR image of polar ice. We develop a simple statistical procedure which classifies pixels of an image by eliminating the effects of shadow-like features. Methodology developed in this paper is illustrated using some noisy SAR images of ice floes in the Arctic sea.     

Physical model of drain conductance, gd, degradation ofNMOSFET's due to interface state generation by hot carrierinjection

Degradation of analog device parameters such as drain conductance, g_d, due to hot carrier injection has been modeled for NMOSFET's. In this modeling, mobility reduction caused by interface state generation by hot carrier injection and the gradual channel approximation were employed. It has been found that g_d degradation can be calculated from linear region transconductance, g_m, degradation which is usually monitored for hot carrier degradation of MOSFET's. The values of g_d degradation calculated from g_m degradation fit well to the measured values of g_d degradation The dependence of the g_d degradation lifetime on L_eff has been also studied, this model also provides an explanation of the dependence on L_eff. The model is then useful for lifetime predictions of analog circuits in which g_d degradation is usually more important than g_m degradation     

Effect of lanthanide ions on the phase behavior of dipalmitoylphosphatidylcholine multilamellar liposomes

The effect of lanthanide ions (Ln3+) and their coordination compounds of diethylenetriamine pentaacetic acid (DTPA) on the phase behavior of dipalmitoylphosphatidylcholine (DPPC) multi-lamellar liposomes has been studied by differential scanning calorimetry (DSC), Raman spectroscopy, and freeze-fracture electron microscopic techniques. The displacement of Ca2+ binding on DPPC liposomes by lanthanide ions was also studied. The results show that the binding degree of four kinds of chloride salts with DPPC liposomes is: YbCl3 > GdCl3 > LaCl3 > CaCl2. Lanthanide ions increase the phase transition temperature of DPPC liposomes and decrease the membrane fluidity. Freeze-fracture electron microscopic results show that La3+ enhances the order of DPPC membrane. The effect of coordination compounds of lanthanides with DTPA on the phase behavior of DPPC liposomes is smaller than that of their chlorides. La3+, Gd3+, and Yb3+, can displace Ca2+ binding on DPPC liposomes, but there coordination compounds of DTPA can hardly displace Ca2+. Raman spectroscopic results show that a very slight effect in lateral packing order of DPPC liposomes was observed at various concentrations of lanthanides.