A simple model for the semicontinuous heterophase polymerization: Ethyl methacrylate as a case example

A simple but comprehensive model considering homogeneous and micellar nucleation, coagulation, entry of radicals to particles and to micelles and radicals' exit from particles, is presented. The model is validated, in a starved semicontinuous heterophase polymerization of ethyl methacrylate, at three monomer addition rates. The model accurately describes the overall and instantaneous conversion, the average particle density and diameter, and the number and weight average molar masses evolutions over time. It is found that even though the average number of radicals is much smaller than 0.5, the system is not 0-1. An empirical function was used to describe the gel effect. The homogeneous nucleation was the prevailing mechanism for particle formation and large exit rates of radicals were observed. POLYM. ENG. SCI., 60: 223–232, 2019. © 2019 Society of Plastics Engineers     

Retrograde Amnesia Induced by Drugs Acting on Different Molecular Systems.

The gamma aminobutyric acid-A (GABAA) agonist, muscimol, the glutamate N-methyl-D-aspartate (NMDA) receptor antagonist, D-2-amino-5-phosphonopentanoic acid (AP5), and the inhibitor of the extracellularly regulated kinases (ERKs), UO 126, cause retrograde amnesia when administered to the hippocampus. In the present study, the authors found that they all cause retrograde amnesia for 1-trial inhibitory avoidance, not only when infused into the dorsal CA1 region of the hippocampus, but also when infused into the basolateral amygdala or the entorhinal, parietal, and posterior cingulate cortices. The posttraining time course of the effect of each drug was, however, quite different across brain structures. Thus, in all of them, NMDA receptors and the ERK pathway are indispensable for memory consolidation, and GABAA receptor activation inhibits memory consolidation: but in each case, their influence is interwoven differently. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evanescently coupled photodiodes integrating a double-stage taper for 40-Gb/s applications-compared performance with side-illuminated photodiodes

The design, fabrication, and performance of double-stage taper photodiodes (DSTPs) are reported. The objective of this work is to develop devices compatible with 40-Gb/s applications. Such devices require high efficiency, ultrawide band, high optical power handling capability, and compatibility with low-cost module fabrication. The integration of mode size converters improves both the coupling efficiency and the responsivity with a large fiber mode diameter. Responsivity of 0.6 A/W and 0.45 A/W are achieved with a 6-/spl mu/m fiber mode diameter and cleaved fiber, respectively, providing relaxed alignment tolerances (/spl plusmn/1.6 /spl mu/m and /spl plusmn/2 /spl mu/m, respectively), compatible with cost-effective packaging techniques. DSTPs also offer a wide bandwidth greater than 40 GHz and transverse-electric/transverse-magnetic polarization dependence lower than 0.2 dB. Furthermore, a DSTP saturation current as high as 11 mA results in optical power handling greater than +10 dBm and a high output voltage of 0.8 V. These capabilities allow the photodiode to drive the decision circuit without the need of a broad-band electrical amplifier. The DSTP devices presented here demonstrate higher responsivities with large fiber mode diameter and better optical power handling capabilities and are compared with classical side-illuminated photodiodes.     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

Nanocrystalline TiO2 photosensitized with natural polymers with enhanced efficiency from 400 to 600 nm

TiO₂ sensitization for solar applications requires not only efficient but also stable and inexpensive sensitizers. Different condensed tannins extracted from bark wastes of tropical wood trees were studied as possible sensitizers of TiO₂. These natural polymers adhere strongly to the TiO₂ even from aqueous solutions. Absorption spectra are presented for 1 mM aqueous sensitizing solutions prepared with lyophilized condensed tannins which absorb light in the visible range. Spectral photocurrent measurements and I–V characterization show that no bias is required for electron injection to the TiO₂ from all studied condensed tannins. Incident photon to current efficiency (IPCE) analysis indicates that surface complexation originates absorption bands with different electron injection efficiencies. These play a dominant role in determining IPCE spectral shape. We propose that surface modification by the sensitizer changes the surface trap density, thereby decreasing recombination losses.     

Trends in Hydrological Parameters of a Southern Brazilian Watershed and its Relation to Human Induced Changes

The Piracicaba river basin is a subtropical watershed located in the southeastern region of Brazil. With an area of 12 400 km², the basin is a typical example of new landscape resulting from development in tropical and sub-tropical regions: establishment of intensive industrial and agricultural processes were followed by significant population growth and water management. This scenario has led to significant increase in water demand and decrease in water quality. The main objective of this study is the detection of changes in the patterns of flow and precipitation in the basin, and its possible relation to man-induced changes. Statistical analyses were performed on records of precipitation, evapotranspiration and streamflow, from 1947 to 1991. Precipitation and evapotranspiration totals showed significant increasing trends for the entire basin. From eight streamflow gauge stations, half showed significant decreasing trend. The most probable cause of such trends is the export of water from the basin to the metropolitan region of São Paulo city.     

Innovation assessment in traditional industries. A proposal of aesthetic innovation indicators

Innovative activities are fundamental to the competitiveness strategies of the firms in a globalized market. Their assessment, using indicators such as those utilized in the Community Innovation Survey (CIS), shows significant sectoral dispersion. Traditional industries are in a weak position because the innovation they are involved in is mainly aesthetic, which is not really addressed in innovation surveys. In this work, we review the various criticisms levelled at existing indicators and propose some new indicators that would capture the types of innovations that are conducted by the traditional industries. This work is based on a study of the features of traditional industries and the concept of aesthetic novelty. The proposed indicators are tested in the Spanish footwear industry.