Flow mixing inside a control-rod guide tube – Experimental tests and CFD simulations

This paper covers a combined experimental and computational effort carried out at Vattenfall Research & Development AB in order to study the thermal mixing in the annular region between a top tube and a control-rod stem. The low frequency thermal fluctuations in this region can result in problems with thermal fatigue and have caused cracks in the control-rod stems of several nuclear reactors ( [Kobayashi et al., 2009] and [0070] ).The flow in the vertical annular region formed by the top tube and the control-rod stem is characterized by the mixing of hot bypass flow with cold crud-removal flow. The crud-removal flow is flowing upwards along the control-rod stem, and the warmer bypass flow is entering through eight horizontal holes positioned in the lower part of the guide tube and four holes in the upper part of the top tube, forming jets.Two full-scale models of a control rod, including the control-rod stem and the guide tube, were constructed. The first model, designed to work at atmospheric conditions, was made of Plexiglass, in order to be able to visualize the mixing process, whereas the second one was made of steel to allow for a higher temperature difference between the two flows, and the heating of the top tube.CFD simulations of the case at atmospheric conditions were also carried out.Both the experiments and the simulations showed that the mixing region between the cold crud-removal flow and the warm bypass flow is dominated by large flow structures coming from above. The process is characterized by low frequency, high amplitude temperature fluctuations. The process is basically hydrodynamic, caused by the downward transport of flow structures originated at the upper bypass inlets. The damping thermal effects through buoyancy is of secondary importance, as also the scaling analysis shows, however a slight damping of the temperature fluctuations can be seen due to natural convection due to a pre-heating of the cold crud-removal flow. The comparison between numerical and experimental results shows a rather good agreement, indicating that experiments with plant conditions are not necessary since, through the existing scaling laws and CFD calculations, the obtained results may be extrapolated to plant conditions.The problem of conjugate heat transfer has not yet been addressed experimentally since complex and difficult measurements of the heat transfer have to be carried out. These types of measurements, along with corresponding CFD calculations, constitute one of the main challenges to be dealt with in ongoing work.     

A novel control method for dispersed converters providing dynamic frequency response

Active power converters are flexible and highly dynamic. Many power converters, as battery charging devices, use only a small part of their technical capabilities. This paper develops a new control method that combines the primary converter function with grid frequency control. Doing this, the frequency stability can be influenced positively, using the power converters control potential, without penetrating its primary functions under normal power system conditions. In case of severe frequency deviations, priority is given to this grid support functionality, which can significantly improve the security of supply. If the converter’s control algorithm does not take frequency stability aspects into consideration, the impact of thousands of these devices on the grid frequency stability will be negative. Electric and hybrid cars with battery storage and plug-in capabilities are used as an example for power conversion units. The impact of many cars, with the referred control method, on the UCTE (Union for the Co-ordination of Transmission of Electricity) grid frequency can be observed by simulations. Even a small percentage of electric cars can significantly influence the grid frequency after a power plant disconnection fault. No communication between network operator and converter is necessary for the basic grid supporting functions. Dispersed frequency support as suggested by the developed control method could be adopted as a requirement to future grid codes.     

Oxidative Stability of Polyunsaturated Edible Oils Mixed With Microcrystalline Cellulose

The oxidative stability of mixtures of edible oils containing polyunsaturated fatty acids (PUFA) and microcrystalline cellulose (MCC) was investigated. The mixtures studied consisted of oils of either camelina (CAM), cod liver (CLO), or salmon (SO) mixed with either colloidal or powdered MCC. A 50:50 (w/w) ratio of oil:MCC resulted in an applicable mixture containing high levels of PUFA edible oil and dietary fiber. The oxidative stability of the formulated mixtures and the pure oils was investigated over a period of 28 days. The peroxide value (PV) was assessed as a parameter for primary oxidation products and dynamic headspace gas chromatography mass spectrometry (GC/MS) was used to analyze secondary volatile organic compounds (VOC). CAM and the respective mixtures were oxidatively stable at both 4 and 22 °C during the storage period. The marine oils and the respective mixtures were stable at 4 °C. At 22 °C, an increase in hydroperoxides was found, but no increase in VOC was detected during the time-frame investigated. At 42 °C, prominent increases in PV and VOC were found for all oils and mixtures. Hexanal, a common marker for the degradation of n-6 fatty acids, propanal and 2,4-heptadienal (E,E), common indicators for the degradation of n-3 fatty acids, were among the volatiles detected in the headspace of oils and mixtures. This study showed that a mixture containing a 50:50 ratio of oil:MCC can be obtained by a low-tech procedure that does not induce oxidation when stored at low temperatures during a period of 1 month.     

Efficient phage display of intracellularly folded proteins mediated by the TAT pathway

Phage display with filamentous phages is widely applied and well developed, yet proteins requiring a cytoplasmic environment for correct folding still defy attempts at functional display. To extend applicability of phage display, we employed the twin-arginine translocation (TAT) pathway to incorporate proteins fused to the C-terminal domain of the geneIII protein into phage particles. We investigated functionality and display level of fluorescent proteins depending on the translocation pathway, which was the TAT, general secretory (SEC) or signal recognition particle (SRP) pathway mediated by the TorA, PelB or DsbA signal sequences, respectively. Importantly, for green fluorescent protein, yellow fluorescent protein and cyan fluorescent protein, only TAT, but not SEC or SRP, translocation led to fluorescence of purified phage particles, although all three proteins could be displayed regardless of the translocation pathway. In contrast, the monomeric red fluorescent protein mCherry was functionally displayed regardless of the translocation pathway. Hence, correct folding and fluorophor formation of mCherry is not limited to the cytosol. Furthermore, we successfully displayed firefly luciferase as well as an 83 kDa argonaute protein, both containing free cysteines. This demonstrates broad applicability of the TAT-mediated phagemid system for the display of proteins requiring cytoplasmic factors for correct folding and should prove useful for the display of proteins requiring incorporation of co-factors or oligomerization to gain function.     

Dissolution,Transport and Reaction at a DICY/DGEBA Interface

The curing of an epoxy consisting of the solid hardener dicyandiamide (DICY) and the resin diglycidyl ether of bisphenol A (DGEBA) is studied in a system consisting of a tablet of DICY embedded in liquid DGEBA. Dissolution of DICY within the liquid DGEBA in combination with the transport of dissolved DICY from the tablet border into DGEBA and the chemical reaction of both reactants is studied by scanning Brillouin microscopy and infrared spectroscopy. Scanning Brillouin microscopy demonstrates the spatial and temporal evolution of the static and dynamic hypersonic properties in the course of curing in the vicinity of the DICY tablet. Infrared spectroscopy performed on epoxy pieces extracted from the final sample at different distances from the tablet surface give information about the spatial evolution of the curing process. The results achieved by both techniques are finally combined to yield a better understanding of the curing of DICY-based epoxies, which transform upon curing from strongly heterogeneous systems towards increasingly homogeneous systems.     

Feasibility of NIR interactance hyperspectral imaging for on-line measurement of crude composition in vacuum packed dry-cured ham slices

There is a growing market for packaged slices of dry-cured ham. The heterogeneity of the composition of slices between packages is an important drawback when aiming to offer consumers a product with a known and constant composition which fits individual consumer expectations. The aim of this work was to test the feasibility of NIR interactance imaging for on-line analysis of water, fat and salt and their spatial distribution in dry-cured ham slices. PLSR models for predicting water, fat and salt contents with NIR spectra were developed with a calibration set of samples (n = 82). The models were validated with an external validation set (n = 42). The predictive models were accurate enough for screening purposes. The errors of prediction were 1.34%, 1.36% and 0.71% for water, fat and salt, respectively. The spatial distribution of these components within the slice was also obtained.     

Synthesis of Carboxamide-Containing Tranylcypromine Analogues as LSD1 (KDM1A) Inhibitors Targeting Acute Myeloid Leukemia

Lysine-specific demethylase 1 (LSD1/KDM1A) oxidatively removes methyl groups from histone proteins, and its aberrant activity has been correlated with cancers including acute myeloid leukemia (AML). We report a novel series of tranylcypromine analogues with a carboxamide at the 4-position of the aryl ring. These compounds, such as 5 a and 5 b with benzyl and phenethylamide substituents, respectively, had potent sub-micromolar IC₅₀ values for the inhibition of LSD1 as well as cell proliferation in a panel of AML cell lines. The dose-dependent increase in cellular expression levels of H3K4me2, CD86, CD11b and CD14 supported a mechanism involving LSD1 inhibition. The tert-butyl and ethyl carbamate derivatives of these tranylcypromines, although inactive in LSD1 inhibition, were of similar potency in cell-based assays with a more rapid onset of action. This suggests that carbamates can act as metabolically labile tranylcypromine prodrugs with superior pharmacokinetics.     

KCl‐induced corrosion of Ni‐based alloys containing 35–45 wt% Cr

Ni–(35–45)Cr–4Nb alloys containing different fractions of α‐Cr were exposed to potassium chloride (KCl)‐induced corrosion. The corrosion exposures were carried out for 168 hr at 600°C in a 15% (vol/vol) H₂O (g) + 5% (vol/vol) O₂ (g) + N₂ (g; balance) atmosphere using KCl‐free (reference) and predeposited KCl samples. To mimic the KCl deposition in real boilers, 24 hr exposures where KCl vapor condensed continuously onto samples were also performed. The corrosion attack of the studied materials increased significantly when KCl was present compared to the KCl‐free samples. For the KCl exposures, the corrosion attack drastically increased when a significant α‐Cr fraction was present. α‐Cr was either selectively attacked or dissolved through solid‐state diffusion and a layered build‐up of the outer external scale of K₂CrO₄ and chromia could be observed. For the in situ condensed KCl exposure, severe corrosion was observed already within the 24 hr exposure, indicating a higher corrosion rate compared with when KCl was predeposited.     

A note on weighted least square distribution fitting and full standardization of the empirical distribution function

The relationship between the norm square of the standardized cumulative distribution and the chi-square statistic is examined using the form of the covariance matrix as well as the projection perspective. This investigation enables us to give uncorrelated components of the chi-square statistic and to provide interpretation of these components as innovations standardizing the cumulative distribution values. The norm square of the standardized difference between empirical and theoretical cumulative distributions is also examined as an objective function for parameter estimation. Its relationship to the chi-square distance enables us to discuss the large sample properties of these estimators and a difference in their properties in the cases that the distribution is evaluated at fixed and random points.