Mechanism of Magnetite Seam Formation and its Role for FeO Scale Transformation

The phase transformation behavior of a thermally grown oxide scale of FeO on pure-Fe and an Fe–2wt%Au alloy was investigated. Particular attention was paid to formation of a magnetite seam, which is the Fe₃O₄ layer formed at the FeO/alloy interface at an initial stage of the phase transformation, since it has important effects on the overall phase transformation of FeO scale. A thin Au(Fe) layer was found to develop on the Fe–Au alloy at the FeO/alloy interface after 32 min of oxidation at 750 °C in air. This Au(Fe) layer prevented formation of a magnetite seam and accelerated the FeO eutectoid reaction. The Au(Fe) layer acted as a “chemical diffusion barrier” for inward diffusion of Fe from the FeO to the alloy substrate across the FeO/alloy interface and prevented magnetite seam formation.     

Reaction joining of SiC ceramics using TiB2-based composites

SiC ceramics were reaction joined in the temperature range of 1450–1800 °C using TiB₂-based composites starting from four types of joining materials, namely Ti–BN, Ti–B₄C, Ti–BN–Al and Ti–B₄C–Si. XRD analysis and microstructure examination were carried out on SiC joints. It is found that the former two joining materials do not yield good bond for SiC ceramics at temperatures up to 1600 °C. However, Ti–BN–Al system results in the connection of SiC substrates at 1450 °C by the formation of TiB₂–AlN composite. Furthermore, nearly dense SiC joints with crack-free interface have been produced from Ti–BN–Al and Ti–B₄C–Si systems at 1800 °C, i.e. joints TBNA80 and TBCS80, whose average bending strengths are measured to be 65 MPa and 142 MPa, respectively. The joining mechanisms involved are also discussed.     

Microstructure and mechanical properties of Pt-added and Pd-added Zr-20Nb alloys and their metal release in 1 mass% lactic acid solution

The effects of Pt and Pd addition to a Zr-20Nb alloy on its microstructure and mechanical property, as well as the elution of metals from the alloys in lactic acid solution, were investigated. The microstructure was characterized with an X-ray diffractometer (XRD), an optical microscope (OM), and a transmission electron microscope (TEM). The mechanical properties were evaluated by a tensile test. The β phase is dominantly observed in the Zr-20Nb as well as in the Pt-added and Pd-added Zr-20Nb alloys. Needle-like microstructures are observed in equiaxed grains in all alloys. Pd addition to the Zr-20Nb alloy suppresses ω phase formation more than Pt addition does. The 0.2% offset yield strength and the ultimate tensile strength of the Pt-added and Pd-added Zr-20Nb alloys increase with the Pt and Pd concentrations. XRD analysis revealed that the lattice parameter of β-Zr in the Pt-added and Pd-added Zr-20Nb alloys decreases with the Pt and Pd concentrations. Pt and Pd solute in β-Zr as a substitutional element and contribute to the increase in the strength by solid solution hardening. The addition of 2Pt and 2Pd to the Zr-20Nb alloy also improves metal elution from the alloys in lactic acid solution.     

In vitro formation and thermal transition of novel hybrid fibrils from type I fish scale collagen and type I porcine collagen

Novel type I collagen hybrid fibrils were fabricated by neutralizing a mixture of type I fish scale collagen solution and type I porcine collagen solution with a phosphate buffer saline at 28 °C. Their structure was discussed in terms of the volume ratio of fish/porcine collagen solution. Scanning electron and atomic force micrographs showed that the diameter of collagen fibrils derived from the collagen mixture was larger than those derived from each collagen, and all resultant fibrils exhibited a typical D-periodic unit of ∼67 nm, irrespective of volume ratio of both collagens. Differential scanning calorimetry revealed only one endothermic peak for the fibrils derived from collagen mixture or from each collagen solution, indicating that the resultant collagen fibrils were hybrids of type I fish scale collagen and type I porcine collagen.     

Preliminary spectrum shifter design for intermediate energy nuclear data benchmark experiments with DT neutrons

Integral benchmark experiments with DT neutrons are not always sufficient for nuclear data benchmarking in the MeV region, below 10 MeV. A neutron spectrum shifter, which will be placed between a sample and a DT neutron source, is effective to moderate DT neutrons incident to the sample. In order to estimate effects of the spectrum shifter, the ratio of the contribution of 14 MeV neutrons in the leakage neutron and gamma-ray spectra was calculated with MCNP-4C for an experimental configuration at FNS of JAEA, Japan. The calculations were carried out for a Li₂TiO₃ sample with a Be, D₂O, or ⁷LiD spectrum shifter. It was found out that the Be shifter was superior to others and the Be shifter was effective to decrease the contribution of 14 MeV neutrons especially for secondary gamma-ray spectrum measurements.     

Template-free hydrothermal synthesis of hollow hematite microspheres

Hollow hematite (α-Fe₂O₃) microspheres with an average diameter of 3-4 μm and a shell thickness of approximate 150 nm was synthesized by a simple hydrothermal route using FeCl₃·6H₂O solution and acetic acid without using any templates. The hollow microspheres were composed of α-Fe₂O₃ nanoparticles with the diameter range from 20 to 40 nm. The effects of reaction parameters such as reaction time, temperature, concentration of FeCl₃·6H₂O solution, and initial pH on the morphology of the final products were investigated. A possible formation mechanism of hollow α-Fe₂O₃ microspheres was also proposed, where the acetic acid played a role of etching in the formation of hollow structure.     

Large-aperture automatic focimeter for the measurement of optical power and other optical characteristics of ophthalmic lenses

We propose an optical apparatus enabling the measurement of spherical power, cylindrical power, and optical center coordinates of ophthalmic lenses. The main advantage of this new focimeter is to provide a full bidimensional mapping of the characteristics of ophthalmic glasses. This is made possible thanks to the use of a large-area and high-resolution position-sensitive detector. We describe the measurement principle and present some typical mappings, particularly for progressive lenses. We then discuss the advantages in terms of speed and versatility of such a focimeter for the measurement of complex lens mappings.     

Interactive segmentation of the cerebral lobes with fuzzy inference in 3T MR images.

Measurement of volume and surface area of the frontal, parietal, temporal and occipital lobes from magnetic resonance (MR) images shows promise as a method for use in diagnosis of dementia. This article presents a novel computer-aided system for automatically segmenting the cerebral lobes from 3T human brain MR images. Until now, the anatomical definition of cerebral lobes on the cerebral cortex is somewhat vague for use in automatic delineation of boundary lines, and there is no definition of cerebral lobes in the interior of the cerebrum. Therefore, we have developed a new method for defining cerebral lobes on the cerebral cortex and in the interior of the cerebrum. The proposed method determines the boundaries between the lobes by deforming initial surfaces. The initial surfaces are automatically determined based on user-given landmarks. They are smoothed and deformed so that the deforming boundaries run along the hourglass portion of the three-dimensional shape of the cerebrum with fuzzy rule-based active contour and surface models. The cerebrum is divided into the cerebral lobes according to the boundaries determined using this method. The reproducibility of our system with a given subject was assessed by examining the variability of volume and surface area in three healthy subjects, with measurements performed by three beginners and one expert user. The experimental results show that our system segments the cerebral lobes with high reproducibility.