Energy storage capacity investigation of pulsed current formed nano-structured lead dioxide

An electro-deposition method was used for the preparation of nano-structured lead dioxide. The lead dioxide films prepared were used as positive electrodes of lead acid batteries. Different parameters such as pulse time (t_on), pulse height, and relaxation time (t_off) were optimized to obtain higher capacity. Depend on the pulse conditions, a range of different morphologies of various porosities and connectivity was obtained. The resulting batteries were discharged to a cut off voltage of 1.75 V by a pulsed current method. The energy storage ability of the prepared lead acid batteries shows a close relation with the morphology of cathode materials. Maximum capacity was observed when pulse and relaxation time was equal to 0.1 and 5 s, respectively, at a current density of 25 mA cm⁻². A change in morphology of lead dioxide from aggregated globular structure to nanofiber was occurred. It was found that the high surface area as well as high connectivity between particles resulted in increased discharge capacity. Analysis of electrochemical impedance spectroscopy (EIS) data revealed that the charge transfer resistance is decreased by a change in morphology from bulk globular to nanofiber as the energy storage test showed. The time dependence of impedance behavior of a sample prepared at t_on = 0.1 s and t_off = 5 s at 25 mA cm⁻² was investigated and the results are discussed.     

Oil/water partition for some hydroxyalkylamines and antimicrobial efficacy in metalworking coolants

Experimental data have been determined for proton ionization and partition of a series of hydroxyalkylamines and their hydrochloride salts between water and a hydrocarbon medium by direct phase contact.Strong correlations were observed to link both the degree of proton ionization and alkyl chain length on the one hand and the thermodynamics of transfer from water to a hydrocarbon environment on the other at certain investigated concentrations.Correlations were also studied between the antimicrobial effect in model aqueous metalworking fluids and oil/water (o/w) partitioning properties. In a synthetic fluid the octylamine derivatives in the antimicrobial evaluation experiments were found to be effective at low concentrations, even though o/w partition coefficients assumed low values under those conditions. In an emulsion type fluid, however, no antimicrobial activity was seen for the more oil soluble amines even at concentrations up to 1200 ppm. This effect is explained as a combined result of the formation of oil-soluble mixed micellar aggregates and the amine oil-solubility which acts to minimize amine concentration in the aqueous phase.Indirect evidence suggests that microbial uptake of these substances is a mediated process and that cross-membrane transport is accomplished by the formation of lipid-soluble complexes with anionic constituents of the membrane structure. At physiological pH values the present hydroxyalkylamines occur in cationic form and the degree of hydrophilic/hydrophobic substitution seems to determine partition across the membrane and thus promotes antimicrobial action.Calculated enthalpy values are seen to be dominant in disfavouring transfer of the butylamine derivatives from water to oil, while effects of self-association of the octylamine analogues make an interpretation of temperature variation effects on the o/w partition coefficient difficult for these compounds.     

Modelling multivalent defects in thin film solar cells

Multivalent defects, e.g. double donors/acceptors or amphoteric defects, are important in materials used in solar cell production in general and in chalcopyrite materials in particular. We extended our thin film solar cell simulation software scaps to enable the simulation of multivalent defects with up to five different charge states; the algorithms presented are however able to simulate an arbitrary number of possible charge states. The presented solution method avoids numerical inaccuracies caused by the subtraction of two almost equal numbers.This new modelling facility is afterwards used to investigate the consequences of the multivalent character of defects for the simulation of chalcopyrite based solar cells.     

Leaching of a zinc ore and concentrate using the Geocoat™ technology

In this study, the Geocoat™ technology was used for the extraction of zinc from a mineral concentrate obtained from the Kooshk mine (Yazd, Iran) by a culture dominated by the mesophilic bacterium Acidithiobacillusferrooxidans in a packed column bioreactor. A low grade sphalerite ore was used as support for the concentrate coating. During the 100 days of leaching pH, Fe³⁺, Fe^total, microbial population density and zinc extraction were measured. The final zinc extraction from concentrate and low grade support was 97% and 78%, respectively, and it was found that leaching from the support does not proceed significantly before leaching from the coating is completed.     

The S-transform using a new window to improve frequency and time resolutions

The S-transform presents arbitrary time series as localized invertible time–frequency spectra. This transformation improves the short-time Fourier transform and the wavelet transform by merging the multiresolution and frequency-dependent analysis properties of wavelet transform with the absolute phase retaining of Fourier transform. The generalized S-transform utilizes a combination of a Fourier transform kernel and a scalable-sliding window. The common S-transform applies a Gaussian window to provide appropriate time and frequency resolution and minimizes the product of these resolutions. However, the Gaussian S-transform is unable to obtain uniform time and frequency resolution for all frequency components. In this paper, a novel window based on the $t$ student distribution is proposed for the S-transform to achieve a more uniform resolution. Simulation results show that the S-transform with the proposed window provides in comparison with the Gaussian window a more uniform resolution for the entire time and frequency range. The result is suitable for applications such as spectrum sensing.     

The significance of asbestos exposure in the diagnosis of mesothelioma: a 28-year experience from a major urban hospital

A continued increase in the incidence of diffuse mesothelioma has been attributed to greater industrial use of asbestos but is also due in part to wider acceptance of this tumor by pathologists. In this retrospective study, the epidemiology, clinical presentation, and pathology of asbestos and non-asbestos-related mesothelioma from a major urban hospital were reviewed. Of the 36 cases of mesothelioma on file, 19 were not associated with exposure to asbestos. Although a retrospective study raises the possibility of inadequate occupational histories, the lack of history of asbestos exposure correlated with postmortem histology by light microscopy. When postmortem material was reviewed, evidence of asbestos exposure was present in all cases of mesothelioma with history of exposure to asbestos, and in no cases in which the patient denied history of asbestos exposure. Using strict histologic and histochemical criteria, the diagnosis of mesothelioma was confirmed in 8 of 9 patients with asbestos-related mesothelioma but in only 4 of 13 cases of non-asbestos-related mesothelioma. The diagnosis of diffuse methelioma is often difficult to make even wtih complete autopsy examinations. It should be entertained only with adherence to strict clinical and pathologic criteria, especially in women with no history to exposure to asbestos dust.     

Mechanical,morphological, and thermal properties of poly(vinyl chloride)/low‐density polyethylene composites filled with date palm leaf fiber

This article investigates the mechanical, morphological, and thermal properties of poly(vinyl chloride) (PVC) and low‐density polyethylene (LDPE) blends, at three different concentrations: 20, 50, and 80 wt% of LDPE. Besides, composite samples that were prepared from PVC/LDPE blend reinforced with different date palm leaf fiber (DPLF) content, 10, 20, and 30 wt%, were also studied. The sample in which PVC/LDPE (20 wt%/80 wt%) had the greatest tensile strength, elongation at break, and modulus. The good thermal stability of this sample can be seen that T_10% and T_20% occurred at higher temperatures compared to others blends. DPLF slightly improved the tensile strength of the polymer blend matrix at 10 wt% (C10). The modulus of the composites increased significantly with increasing filler content. Ageing conditions at 80°C for 168 h slightly improved the mechanical properties of composites. Scanning electron microscopic micrographs showed that morphological properties of tensile fracture surface are in accordance with the tensile properties of these blends and composites. Thermogravimetric analysis and derivative thermogravimetry show that the thermal degradation of PVC/LDPE (20 wt%/80 wt%) blend and PVC/LDPE/DPLF (10 and 30 wt%) composites took place in two steps: in the first step, the blend was more stable than the composites. In the second step, the composites showed a slightly better stability than the PVC/LDPE (20 wt%/80 wt%) blend. Based on the above investigation, these new green composites (PVC/LDPE/DPLF) can be used in several applications. J. VINYL ADDIT. TECHNOL., 25:E88–E93, 2019. © 2018 Society of Plastics Engineers     

Thiazole derivatives‐functionalized polyvinyl chloride nanocomposites with photostability and antimicrobial properties

Polyvinyl chloride (PVC) was modified via substitution reaction with 2‐aminothiazole and ethyl 2‐aminothiazole‐4‐carboxylate separately in the absence and in presence of silver (AgNPs) or copper (CuNPs) nanoparticles, using metal salts as precursors, in 3% (w/w) with respect to PVC. The functionalized PVC‐nanocomposites have been characterized via FTIR, ¹HNMR spectroscopic analyses, in addition to the morphological investigation such as scanning (SEM) and transmission electron microscopy (TEM). Spectral data confirmed the introduction of the thiazole (ester) to the PVC backbone. TEM analysis showed that the sizes of the AgNPs and CuNPs have fallen in the range of 10–30 nm and 30–50 nm for the prepared nanocomposites, respectively. Evaluating the photostability of modified nanocomposites was estimated by following the extent of discoloration for UV‐irradiated samples colorimetrically in accordance with the irradiation time. The antimicrobial activity of the modified nanocomposites was explored against three Gram+ve bacteria (Bacillus subtilis, Staphylococcus aureus, and Streptococcus faecalis), three Gram‐ve bacteria (Escherichia coli, Neisseria gonorrhoeae, and Pseudomonas aeruginosa), and two fungi (Candida albicans and Aspergillus flavus). Aminothiazole (ester)‐functionalized PVC exhibited significant antimicrobial efficiencies against the investigated pathogens. However, incorporation of AgNPs or CuNPs to the modified PVC enhanced their inhibitory effect against the microorganisms under investigation. J. VINYL ADDIT. TECHNOL., 25:E137–E146, 2019. © 2018 Society of Plastics Engineers     

Two-stage thermocatalytic upgrading of fuel oil to olefins and fuels over a nanoporous hierarchical acidic catalyst

A two-stage thermocatalytic upgrading process using a novel catalyst was investigated to produce light olefins and liquid fuels from fuel oil. The upgraded oil from the first thermal stage demonstrated lower viscosity and higher crackability compared to the virgin feedstock. In the next step, the vapor-phase catalytic cracking of the upgraded fraction was implemented over a novel nanoporous composite catalyst, characterized by the XRD, FTIR, NH₃- TPD, and N₂ physisorption techniques. In total, more than 55?wt% of light olefins, particularly propylene (25.5?wt%) together with 25.4?wt% and 32.5?wt% of gasoline and diesel fuel were obtained in this process.     

Dielectric and mechanical optimization properties of porous poly(ethylene‐co‐vinyl acetate) copolymer films for pseudo‐piezoelectric effect

In this article, the authors present a porous copolymer film with pseudo‐piezoelectric effects as a new candidate material for sensing applications. Porous films of poly(ethylene‐co‐vinyl acetate) (EVA) with a thicknesses ranging from 160 to 310 μm are fabricated by a coextrusion chemical foaming process and charged using a high‐voltage contact charging process. Output performances (piezoelectric constant and relative permittivity) with related thermal/mechanical stability are specifically studied as a function of the film porosity and of the electrical charging process. The piezoelectric constant d₃₃ increases with the cell porosity and an interesting piezoelectric constant close to 5.1 pC/N is achieved with a porous EVA film containing 65% of porosity. Actual results are then discussed using a theoretical solid–gas multilayer model to describe and predict the pseudo‐piezoelectric effect of porous polymer materials. The originality of this work lies in the fact that all the steps leading to optimize pseudo piezoelectric films are included, and also in the use of EVA which is not a standard piezoelectric material. Therefore, this work is a contribution in the development of low‐cost piezoelectric materials with potential applications as sensor in different fields such as medical, security, environment, sport, and transport. POLYM. ENG. SCI., 59:1455–1461 2019. © 2019 Society of Plastics Engineers