Electroplating of nickel-cadmium alloys from alkaline solutions

The electroplating of Ni-Cd alloy coatings was carried out from alkaline baths (pH 10). For comparison, electroplating of the parent metals, Ni and Cd, was performed individually under the same conditions. The cathodic current efficiency for codeposition was high and decreased with increasing current density. The codeposition process is an anomalous type of plating with Cd being the preferentially deposited metal. The Ni content in the deposits increased with increasing current density. This increase in Ni content improves the corrosion resistance and microhardness of the deposits. X-ray diffraction analysis showed that the deposits consist of a mixture of Ni, β, γ, γ¹ phases.     

An analytical model for high electron mobility transistors

In this paper we present a new model for HEMT's which is based on a single analytical function that describes the electron concentrations in the two dimensional electron gas and in the AlGaAs layer. Besides accounting for the AlGaAs conduction, the model includes the effect of mobility degradation, channel length modulation in the saturation region and the series resistances R_S and R_D. The model results in closed form expressions for the current, transconductance, output conductance and gate capacitance. Finally, the theoretical predictions of the model are compared with the experimental data and shown to be in good agreement over a wide range of bias conditions     

Majority and minority influence: Source-position imbalance as a determinant of message scrutiny.

Two experiments addressed the issue of whether endorsement of a position by a numerical majority or a minority leads to greater scrutiny of the information presented in a persuasive message. In Exp 1, a counterattitudinal position was endorsed by a majority or a minority and was supported by strong or weak arguments. Argument quality had a larger impact on attitudes with majority than with minority endorsement. In Exp 2, a proattitudinal or a counterattitudinal message was endorsed by a majority or a minority and was supported by strong or weak arguments. When the source and message position were unexpected (i.e., majority-counter and minority-pro messages), argument quality had a larger impact on attitudes than when the source and message position were expected (i.e., majority-pro and minority-counter messages). Thus, either majority or minority endorsement can enhance message scrutiny if the source-position pairing is surprising. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Electrical properties of tri-n-butyl tin acrylate-methylmethacrylate copolymers

The copolymerization of tri-n-butyl tin acrylate (TBTA) with methylmethacrylate (MMA) has been investigated in dioxane. The composition of these copolymers was determined quantitatively by ¹H nuclear magnetic resonance (NMR) spectroscopy. The tin contents were estimated by gravimetric as well as thermogravimetric techniques (TGA). The reactivity ratio of such copolymers was estimated by application of the Kelen-Tudos method. The dielectric properties of the copolymers have been studied over a frequency range of 100–50 kHz at different temperatures from 20 to 70°C. The electrical conductivity for such copolymers was also measured. The results are interpreted in terms of the tin content of the copolymers.     

Promise is Debt, Threat Another Matter: The Effect of Credibility on the Interpretation of Conditional Promises and Threats.

Evidence from reasoning tasks shows that promises and threats both tend to receive biconditional interpretations. They also both display high speaker control. On the face of it, the only difference seems to be the positive or negative signing of the consequent. In a promise, the speaker tries to persuade the hearer to do something by holding out the prospect of a particular reward; in a threat, the speaker tries to refrain the hearer from doing something by holding out the prospect of a particular punishment. This paper investigates the respects in which conditional promises and threats differ further by means of an inference task. The credibility of the consequent was manipulated in order to examine whether the acceptability ratings of inferences based on promises and on threats would be equally affected. The results of the inference task and an analysis of the reasons people give for their answers suggest that the credibility of promises is less affected by the use of excessive consequents than the credibility of threats. In other words, promise remains debt, whereas threat is another matter. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synthesis and structural characterization of new defect pyrochlore type AxLnySb2O6+z antimoniates (0<x, y, z<1; A = Rb, Cs, Tl; Ln = Eu, Gd, and Y) prepared by coprecipitation

New cubic defect pyrochlore type A_xLn_ySb₂O_6+z antimoniates (0<x,y,z<1; A=Rb, Cs, Tl; Ln=Eu, Gd, and Y) (space group Fd3m) were prepared by calcination in air at 650 °C of compositions obtained by a coprecipitation method. Their crystal structures were refined by the Rietveld procedure and further confirmed by X-ray absorption spectroscopy (EXAFS) experiments. Refinements of the X-ray powder diffraction data show a partial and statistical occupation of the 8b site by alkaline or thallous ions and oxygen and lead to values close to 0.33 for the only refinable positional x parameter of the 48f oxygenated site.     

Manganese Distribution between FeO‐MnO‐SiO2–CaO–MgO‐Al2O3 Slags and Molten Iron

Pretreatment of high manganese hot metal is suggested to produce hot metal suitable for further processing to steel in conventional LD converter and rich manganese slags satisfy the requirements for the production of silicomanganese alloys. Manganese distribution between slag and iron represents the efficiency of manganese oxidation from hot metal. The present study has been done to investigate the effect of temperature, slag basicity and composition of oxidizer mixture on the distribution coefficient of manganese between slag and iron. Ferrous oxide activity was determined in molten synthetic slag mixtures of FeO‐MnO‐SiO₂–CaO–MgO‐Al₂O₃. The investigated slags had chemical compositions similar to either oxidizer mixture or slags expected to result from the treatment of high manganese hot metal. The technique used to measure the ferrous oxide activity in the investigated slag systems was the well established one of gas‐slag‐metal equilibration in which molten slags contained in armco iron crucibles are exposed to a flowing gas mixture with a known oxygen potential until equilibrium has been attained. After equilibration, the final chemical analysis of the slags gave compositions having a particular ferrous oxide activity corresponding to the oxygen potential of the gas mixture. The determined values of ferrous oxide activity were used to calculate the equilibrium distribution of manganese between slag and iron. Higher manganese distribution between slag and iron was found to be obtained by using oxidizer containing high active iron oxide under acidic slag and relatively low temperature of about 1350°C.     

Determination of water activities and osmotic and activity coefficients of the system NaCl–BaCl2–H2O at 298.15 K

The water activities of the mixed aqueous electrolyte NaCl–BaCl₂(aq) are measured at total molalities from 0.25 mol kg⁻¹ to about saturation for different ionic strength fractions (y) of NaCl with y=0.33,0.50,0.67. The results allow the deduction of osmotic coefficients. The experimental results are compared with the predictions of the Zdanovskii, Stokes, and Robinson (ZSR), Kusik and Meissner (KM), Robinson and Stokes (RS), Lietzke and Stoughton (LSII), Reilly, Wood, and Robinson (RWR), and Pitzer models. From these measurements, the Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture. The excess Gibbs energy is also determined.     

Polyurethane foams with 1,3‐pyrimidine ring

Attempts of obtaining of polyurethane foams using polyetherols with 1,3‐pyrimidine ring (obtained in reactions of 6‐aminouracil with oxiranes) are reported. Properties of the foams are investigated, especially their thermal stability. The foams show an improved thermal stability up to 200°C for a long time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008