Microwave heating controlled reactive melt infiltration for graphite-Si-SiC ceramics manufacturing

In this work, we investigated a procedure which exploits microwave ovens to produce SiC- based components by reactive melt infiltration of silicon into graphite preforms. The employed oven is designed to grant optical access to the sample surface, which allows to measure its temperature evolution though a noncontact pyrometer. This signal was used as a feedback to control the power provided to the preform and as an experimental output whose analysis provides insight into the reaction mechanism. Specifically, it is found that complete infiltration is achieved much before the end of the reaction. The latter is not fully self-sustained as the global reaction rate continuously decreases with time until it is no more able to keep the temperature above the silicon solidification value. At that point, the reaction stops. The analysis of the processed samples proved that this procedure allows producing fully infiltrated samples without material failure by adjusting the heat provided during the infiltration stage rather than by tuning the preform structure and composition, which is the usual approach. The proposed method is less time and energy consuming than the standard one.     

Single chamber Solid Oxide Fuel Cells selective electrodes: A real chance with brownmillerite-based nanocomposites

In this contribution brownmillerite-based nanocomposite cathode for Single-Chamber Solid Oxide Fuel Cells is developed. These cells can be very attractive especially for small and cheap devices because of the absence of seals. The efficiency of SC-SOFCs is strictly connected to the selectivity of anode and cathode, the bottleneck for this technology. The development of a cathode inert in fuel oxidation is particularly challenging. Our strategy is to start from a catalytically un-active support (CFA = Ca₂FeAl_0.95Mg_0.05O₅) and induce the formation of iron oxide based nanoparticles, expected to activate oxygen. Symmetric (CFA + FeO_x/CGO/CFA + FeO_x) and complete cells (CFA + FeO_x/CGO/Ni-CGO) are studied in air and methane/oxygen 2:1 mixture. The Area Specific Resistance of CFA + FeO_x is less than 1/3 that of CFA. The high selectivity allows to reach an efficiency of 25%; power still needs to be increased but we demonstrated the possibility to develop selective low cost electrodes. The effect of air, methane/oxygen exposure and the heat treatments were carefully investigated.     

Biodegradable hollow microfibres to produce bioactive scaffolds

Biodegradable hollow microfibres containing particles loaded with specific active agents can be potentially employed to produce a special kind of substrate for tissue engineering, able to function as a scaffold and at the same time to act as a drug‐releasing system. Biodegradable hollow microfibres based on poly(lactic acid) were produced by a dry–wet spinning procedure. Drug‐loaded microparticles were prepared by a simple oil‐in‐water emulsion and entrapped inside the fibres. The morphology of both fibres and particles was investigated by scanning electron microscopy. The mechanical and thermal properties of the fibres were investigated by tensile tests and differential scanning calorimetry. In vitro tests were performed to evaluate the release of the drug from the fibres loaded with the particles Copyright © 2004 Society of Chemical Industry     

The aggregate-mortar interface

The aggregate-mortar interface is studied by scanning electron microscope and X-ray diffraction. This study confirmed that calcium hydroxide and ettringite are formed by a “through-solution” mechanism in this zone. The thickness of the transition phase depends on the size and shape of the sand particles. These originate their own surface effects which interfere with those caused by the large aggregate.     

A multidistrict audit on the management of Chlamydia trachomatis in genitourinary medicine clinics in Yorkshire

Although there have been recent molecular biological studies for evidence of possible changes in trypanosome biochemistry, such studies are not yet complemented by parallel clinical studies to determine the possible implications to the sleeping sickness patient. The study of the duration of symptoms and the case fatality of T. b. rhodesiense showed that the disease progressed to the stage of central nervous system involvement between three weeks to two months of infection. Most (> 80%) deaths occurred within six months of illness. The case fatality rate of treated sleeping sickness patients was 6% of which the rate in the late-stage of sleeping sickness was more than two and a half times that in the early stage. The incidence of melarsoprol encephalopathy was 2.5% and case fatality due to this condition was 1.0% and similar to previous findings. Thus it appears the virulence of T. b. rhodesiense circulating in south east Uganda has not changed during the past decades.     

Familial idiopathic intracranial hypertension with spinal and radicular pain

OBJECTIVE: To describe a mother and her 2 sons affected by idiopathic intracranial hypertension (IIH), associated in the sons with root irritation symptom. Unlike the other 4 families reported previously, obesity was not present in our patients. DESIGN: Case reports. SETTING: Department of pediatrics in a university school of Medicine, Naples, Italy. PATIENTS: A mother (aged 36 years) and her 2 sons (aged 14 and 9 years) developed IIH at different times. Neuroimaging showed an empty sella in the mother, while IIH was associated with spinal and radicular pain in her 2 sons. The mother and the younger son developed permanent visual loss. CONCLUSIONS: Ophthalmologic follow-up in our patients indicates that IIH is a chronic disease. Surgical treatment should be considered an option.     

All-Optical Vestigial Sideband Generation Using a Semiconductor Optical Amplifier

An all-optical setup to generate vestigial sideband signals based on self-phase modulation in a semiconductor optical amplifier is experimentally demonstrated at 10 Gb/s. Sideband suppressions higher than 15 dB are reported with improved eye opening. Wavelength-independent operation over 26 nm is demonstrated. Increased chromatic dispersion tolerance is verified: a receiver sensitivity penalty of 5.3 dB, relative to back-to-back, is obtained after transmission over 2720 ps/nm; whereas conventional double sideband is penalized by 4.0 dB after 1360 ps/nm     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.