Late effects of radiotherapy in children

PURPOSE: To examine benzoporphyrin derivative angiography as a modality for studying photosensitizer biodistribution in experimental choroidal melanomas. METHODS: A liposomal preparation of benzoporphyrin derivative was used in this study. Digital benzoporphyrin derivative angiograms were performed in 10 rabbits (six for experimental choroidal melanomas, two for normal choroids, and two for irides) using a Topcon ImageNet H1024 digital imaging system, a Kodak Megaplus video camera, and a Topcon TRC-50-VT fundus camera. Only one eye from each rabbit was used. Filters specifically designed for benzoporphyrin derivative (peak absorption at 580 nm and peak emission at 695 nm) were used. Benzoporphyrin derivative (1 mg/kg) was injected into an ear vein while images of tumor, normal choroid, or iris were being obtained. Follow-up images were obtained during the first 3 hours and at 24 hours after injection. Fluorescence microscopy was performed in all 10 rabbits using 1 mg/kg of benzoporphyrin derivative. Tumor-bearing eyes were enucleated at the same time points that angiograms were performed, and the two sets of results were compared for maximum dye accumulation. RESULTS: Digital angiography demonstrated that maximal benzoporphyrin derivative fluorescence occurred in tumors 15 to 45 minutes after injection. Fluorescence photometry corroborated these results. CONCLUSION: Photosensitizer angiography is a valid modality for determining the optimum treatment time for photodynamic therapy.     

Is implementation of continuous improvement possible? An evolutionary model of enablers and inhibitors

The purpose of this article is to present an evolutionary model of the enablers and inhibitors affecting the implementation and sustainability of continuous improvement. With this aim, a qualitative study using the grounded theory was carried out. Interviews were conducted with managers responsible for continuous improvement in first‐tier suppliers in the automotive sector. As a result, two existing lines of research in the continuous improvement literature are synthesized: on one hand, the literature concerning the enablers and barriers associated with continuous improvement sustainability; and on the other, the literature concerning the evolutionary model. © 2011 Wiley Periodicals, Inc.     

Retraction of “Using ergonomic digital human modeling in evaluation of workplace design and prevention of workrelated musculoskeletal disorders onboard small fishing vessel”

The following article from Human Factors and Ergonomics in Manufacturing & Service Industries, “Using ergonomic digital human modeling in evaluation of workplace design and prevention of workrelated musculoskeletal disorders onboard small fishing vessel,” by Enrique Álvarez‐Casado, Bing Zhang, Sonia Tello Sandoval and Mondelo Pedro, published online on October 11, 2011 in Wiley Online Library ( www.onlinelibrary.wiley.com ), has been retracted by agreement between the authors, the journal Editors‐in‐Chief, Waldemar Karwowski and Gavriel Salvendy, and Publisher Wiley Periodicals, Inc. The retraction has been agreed as these articles were mistakenly published after being rejected.     

Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS,XANES and XPS Analyses of Phases After Oxidation,Reduction, and Reaction

Catalysis Letters - Industrial Cu/ZnO/Al2O3 or novel rate catalysts, prepared with a photochemical deposition method, were studied under functional CH3OH synthesis conditions at the set temperature...     

Platinum particle size effect on the oxidative dehydrogenation of aqueous ethanol

The effect of the platinum particle size was investigated for the catalytic oxidative dehydrogenation of aqueous ethanol to ethanal at a temperature of 303 K, an ethanol concentration of 260 mol m^–3, a partial oxygen pressure 60 kPa, a pH of 9, and an ethanal and ethanoate concentration of 20 mol m^–3. A particle size effect on the turnover frequency was observed but only for particle sizes smaller than 2 nm. Hence, the reaction shows a limited structure sensitivity.     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

Hydrogen evolution in alkaline solution on electrolytic nickel-cobalt and nickel-iron deposited with different bath compositions and current densities

Nickel-cobalt and nickel-iron electrodeposits were characterized as hydrogen electrodes in alkaline water electrolysis (6 mol/L KOH, 25°C). The nickel-based codeposits were fabricated with different bath compositions and at different current densities. The hydrogen evolution in water electrolysis on the nickel-based codeposits was apparently enhanced as compared with that on nickel. The improvement of the electrocatalytic behaviour of the hydrogen electrodes is attributed to their composition and an increase of their active surface, which are dependent on the electrodeposition conditions.     

An Accessible Platform for People With Disabilities

This article discusses a modular, accessible platform that provides a computing environment for people with disabilities accessible through adapted control devices and the television set at users’ homes. Relying on a standard television set as the presentation device allows dependent individuals, especially people with disabilities, to introduce new technological advances in communication and information management in their everyday lives. As a proof-of-concept, the solution presented offers a collection of educational and training services related to teleworking and the search of employment targeted to people with disabilities. A smart job advisor included among these services, which was designed to help our target users to locate job offers that best suit the abilities and disabilities of a particular individual, is also discussed to illustrate how semantic technologies can be applied to increase the perceived accessibility and inclusion by reducing the dependence from other persons. The platform developed, the introduction of semantic technologies, and the way adapted interfacing and presentation devices were integrated may also serve as inspiration to provide services to people with disabilities.     

Studies on blends of natural rubber and ethylene propylene diene rubber modified with phosphorylated cardanol prepolymer: Processability,physico‐mechanical properties,and morphology

The melt processability and physico‐mechanical properties of blends of natural rubber (NR) and ethylene propylene diene rubber (EPDM) containing different dosages (0–10 phr) of phosphorylated cardanol prepolymer (PCP) were studied in unfilled and china‐clay‐filled mixes. The plasticizing effect of PCP in the blends was evidenced by progressive reduction in power consumption of the mixing and activation energy for melt flow with an increase in the dosage of PCP. The PCP‐modified blend vulcanizates showed higher tensile properties and tear strength despite a decrease in the chemical crosslink density (CLD) index. This is presumably due to the formation of a crosslinked network structure of PCP with the rubbers and improved dispersion of the filler particles in the rubber matrix, as evidenced by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Thermogravimetric analysis showed an increase in thermal stability of the blend vulcanizate in presence of 5 phr of PCP. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5123–5130, 2006