A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

Extension of the QUASAR River-Water Quality Model to Unsteady Flow Conditions

A modification of the well-known water-quality model 'quality simulation along river systems'(QUASAR) is presented in order to extend its ability, so that it may be considered applicable under unsteady-flow conditions. An aggregated dead-zone travel-time parameter, based on (a) the kinematic wave velocity (celerity) of the flow wave and (b) the behaviour of the solute within so-called 'dead zones', has been incorporated into the existing model formulation. This extends the current continuously-stirred tank reactor-based model process to account for the behaviour of solute under unsteady-flow conditions. The enhanced water-quality model has been validated by application to the Colorado River.     

The Microbiological Quality of Private Water Supplies

This paper provides a detailed assessment of the microbiological quality of a selection of private water supplies. Samples were taken from 91 supplies and analyzed for total coliforms, faecal coliforms and faecal streptococci. The microbiological quality of the samples was generally poor, with almost 50% of the supplies failing to meet the required standards on at least one occasion. Given the high level of sanitary microbiological failures, there is the possibility that harmful microorganisms could be present and a significant risk to health cannot be discounted.     

A lower carbon footprint process for production of metals from their oxide sources

This paper will describe the solid oxide membrane (SOM) process as it applies to the energy-efficient and environmentally sound production of magnesium from magnesium oxide. Also, it will describe the challenges encountered while using this process for the production of transition metals like titanium from its higher oxides. Finally, a novel magnesiothermic SOM process will be proposed that can enable production of transition metals from its higher oxides.     

Environmental Effects of Hydro-Electric Power Generation in Africa and the Potential for Artificial Floods

Electricity is a fundamental requirement for economic growth, and hydro-electric power is often thought to be environmentally benign. However, the construction and operation of many hydro-power dams in Africa have had significant negative impacts on the environment and rural economies. Reduced downstream flooding has destroyed fisheries and starved the floodplain soils of moisture and nutrients. Often the worst-affected areas have no electrification and therefore do not benefit from power generation. New dams which are planned in Kenya and Tanzania have been specifically designed to make flood releases. This will allow electricity to be generated whilst maintaining a dynamic flooding pattern for the short-term economic importance of fisheries and agriculture and the longer-term importance of soil fertility and biodiversity. Involvement of local community representatives in deciding when flood waters should be released on the Phongolo River in South Africa has resulted in substantial benefits to floodplain users.     

Contamination of the Chalk Aquifer by Chlorinated Solvents: A Case Study of the Luton and Dunstable Area

A detailed investigation of contamination by chlorinated solvents of the Chalk Aquifer underlying the towns of Luton and Dunstable was undertaken to assess the extent, causes and mechanisms of pollution. The research programme incorporated land-use surveys, regional groundwater surveys, monitoring of groundwater abstraction points and aquifer profiling by means of the drilling of observation boreholes, the analysis of the recovered core material and the depth sampling of these and other boreholes.
Low-level solvent contamination of the Chalk Aquifer was found to be widespread with 'hotspots'of higher concentrations. At the drilling sites, both the saturated and unsaturated zones were contaminated with solvents, although free product was not observed. The presence of an additional contaminant, oil, at some sites was noted to influence the distribution of solvents within the aquifer.
Clean-up of the aquifer is not a practical option, and treatment of the groundwater at the abstraction points has been adopted.     

FACTORS AFFECTING THE SOIL MICROBIAL QUALITY MEASUREMENTS OF BIOMASS QUOTIENT AND RESPIRATION QUOTIENT

The soil microbial biomass quotient (expressed as a percentage of the total soil organic carbon) and the specific rate of carbon-dioxide production by soil microbes (respiration quotient) are often used as indicators of stress on soil microbial populations. A low biomass quotient or a high respiration quotient is considered to be an indication of stress from, for example, toxicity from metals in sewage sludge applied to soils. These metabolic quotients are affected by a wide variety of other factors such as the biodegradability of soil organic-carbon amendments, plant inputs of organic carbon into soils, natural variations in microbial population sizes with depth, and in the rhizosphere of plants. These variations could be sufficiently large to make interpretation of changes in biomass quotient and respiration quotient, as a response to stress, problematical.     

Cpk index estimation using data transformation

Process capability indices (PCIs) are used in industry to assess percentages of nonconforming parts. An underlying assumption is that the output process measurements are distributed as normal random variables. When normal distributions are assumed, but different distributions are present - such as skew, heavy-tailed, and short-tailed distributions - the percentages of nonconforming parts are significantly different than the computed PCIs indicate. Data arising from nonnormal distributions can sometimes be transformed to conform to the normality assumption and the PCI's computed for the transformed data. In this paper, the effect of the transformation on the estimate of nonconforming parts is examined for three examples of nonnormal distributions - gamma, lognormal, and Weibull. The results of this experimental analysis suggest that data transformation can be useful for estimating an interval for C_pk values and the number of nonconforming parts.     

MCM-41-supported Co-Mo catalysts for deep hydrodesulfurization of light cycle oil

Light cycle oil (LCO), a by-product of the fluid catalytic cracking (FCC) process in a petroleum refinery, can be used as a blendstock for the production of diesel and jet fuels. Regulatory and operational issues result in need for new and more active catalysts for the deep hydrodesulfurization (HDS) of diesel feedstocks, such as LCO. This paper reports the activity of a mesoporous molecular sieve MCM-41-supported Co-Mo catalyst in comparison to a commercial γ-alumina (Al₂O₃)-supported Co-Mo catalyst for the desulfurization of a LCO with a sulfur content of 2.19 wt.%. The HDS of dibenzothiophene, 4-methyldibenzothiophene, and 4,6-dimethyldibenzothiophene—polyaromatic sulfur compounds present in LCO—and their relative reactivities in terms of conversion were examined as a function of time on stream in a fixed-bed flow reactor. The MCM-41-supported catalyst demonstrates consistently higher activity for the HDS of the refractory dibenzothiophenic sulfur compounds, particularly 4,6-dimethyldibenzothiophene. The presence of a large concentration of aromatics in LCO appears to inhibit the HDS of the substituted dibenzothiophenes.