Study on the relationship between the particle size distribution and the effectiveness of the K‐powder fire extinguishing agent

The relationship between the particle size distribution and the extinguishing effectiveness of the new K‐powder fire extinguishing agent has been studied experimentally, to explore the reason of the great extinguishing efficiency exhibited by the new K‐powder fire extinguishing agent on Class B fire (liquid fuel fire). The results of the experiment showed that the extinguishing effectiveness increased along with the decrease of the particle size distribution. In addition, a sharp discontinuity appeared around the limiting size, about 40 μm. The powder with the particle size below 40 μm exhibited highly effective extinguishing with the minimum effective extinguishing concentration C_xr = 23 g·m^?3, while the powder with the particle size above 40 μm exhibited little fire extinguishing efficiency. Compared with other fire extinguishing agents produced by different substances, the new K‐powder fire extinguishing has the bigger limiting size. That means, in the same particle size distribution, the new K‐powder fire extinguishing agent contains more highly effective powder than others contain, and is more effective.     

基于状态空间法的电动机故障诊断和识别

电动机的初期故障信号一般较弱,不易辨别,而状态空间法在小信号的处理中灵敏度很高。为达到对电动机故障的诊断和识别,试图把状态空间法应用到对电动机的故障诊断中,先通过推导,从数学理论层面分析了状态空间法对于电动机故障信号的可辨别性,再使用Matlab软件搭建状态空间的辨别模型,把实验台测试的三组数据导入到模型中进行测试。测试的结果有力地证明了此方法的可行性,并能克服快速傅里叶变换(FFT)中数据采集量较大、分辨率不高的缺点。     

新型计量斗在锰粉料制块配料中的改进应用

锰粉料制块是解决铁合金冶炼精料入炉的主要途径之一,生产过程中为解决锰粉料粘附计量斗的问题,介绍了一种新型计量斗,阐述他的结构特点和工作原理,实施改进后下料流畅,降低了劳动强度,提高了生产效率。     

交联聚乙烯电缆绝缘老化超低频介损试验及评价规程研究

本文基于通过检测电缆超低频介损值确定电缆老化程度的基本原理,结合某地实测得到的多组数据,通过国际规程IEEE 400.2—2013进行初步判断,分析处于不同状态下的电缆介损值的变化规律及其原因,并得出该规程仅适用于没有局部劣化的电缆.此外,由于我国电缆制造材料、结构和生产工艺与国外产品存在差异,采用国际规程判断电缆老化程度有时会变得不准确.为解决此类问题,本文建立更加全面的判据体系,给出最优判断阈值的确定方法,并对该地区实测得到的数据进行拟合,得到更加准确的分级判断阈值.此方法可为建立符合我国电缆实际情况的评价规程提供参考.     

Covalent triazine framework with efficient photocatalytic activity in aqueous and solid media

Covalent triazine frameworks (CTFs) have been recently employed for visible light-driven photocatalysis due to their unique optical and electronic properties. However, the usually highly hydrophobic nature of CTFs, which originates from their overall aromatic backbone, leads to limitations of CTFs for applications in aqueous media. In this study, we aim to extend the range of the application media of CTFs and design hybrid material of a CTF and mesoporous silica (SBA-15) for efficient photocatalysis in aqueous medium. A thiophene-containing CTF was directly synthesized in mesopores of SBA-15. Due to the high surface area and the added hydrophilic properties by silica, the hybrid material demonstrated excellent adsorption of organic molecules in water. This leads not only to high photocatalytic performance of the hybrid material for the degradation of organic dyes in water, but also for efficient photocatalysis in solvent-free and solid state. Furthermore, the reusability, stability and easy recovery of the hybrid material offers promising metal-free heterogeneous photocatalyst for broader applications in different reaction media.     

铁尾矿砂力学特性及再生利用研究进展

铁尾矿砂的储量日趋增加,要减小铁尾矿坝的风险、提高铁尾矿砂的利用率,须明确铁尾矿砂的力学特性.通过对铁尾矿砂静力特性及动力特性的分析发现,尾矿砂的粒径分布是决定尾矿坝稳定及铁尾矿砂再生利用的主要因素之一,细粒含量、干密度、含水率等因素对铁尾矿砂动力特性有一定影响.再生利用铁尾矿砂的主要方式是将铁尾矿砂混凝土、改性铁尾矿砂用作工程材料,水泥、石灰、纤维是改性铁尾矿砂的主要材料.最后指出需进一步研究新型材料取代传统改性材料改善铁尾矿砂的力学特性,从而提高资源利用率.     

消渴健脾胶囊对2型糖尿病小鼠降血糖作用研究

为研究消渴健脾胶囊对2型糖尿病小鼠的降血糖作用,取75只昆明种雄性小鼠,除正常对照组10只外,其余小鼠腹腔注射链脲佐菌素建立2型糖尿病小鼠模型,将造模成功的糖尿病小鼠随机分为模型组,阳性组(盐酸二甲双胍150.00 mg·kg~(-1)),消渴健脾胶囊低(238.88 mg·kg~(-1))、中(477.75 mg·kg~(-1))、高(955.50 mg·kg~(-1))剂量组,每组10只,正常对照组和模型组给予0.1 mL·(10 g体重)~(-1)蒸馏水,连续给药28 d后,测定小鼠体重、空腹血糖(FBG)值、糖耐量(GT)、糖化血清蛋白(GSP)水平及血清胰岛素(INS)水平。结果表明,与模型组比较,给药28 d后,消渴健脾胶囊各剂量组小鼠体重显著增加,差异具有统计学意义(P0.05);消渴健脾胶囊各剂量组小鼠FBG值显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊中、高剂量组小鼠GT显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊各剂量组小鼠GSP水平显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊高剂量组小鼠INS水平显著升高,差异具有统计学意义(P0.05)。消渴健脾胶囊对链脲佐菌素所致2型糖尿病小鼠有一定的治疗作用。     

Densification mechanism during reactive hot pressing of B4C-ZrO2 mixtures

The densification behaviors of pure B₄C and B₄C-ZrO₂ mixtures were compared during hot pressing. The results showed that in-situ formed ZrB₂ effectively enhanced the densification process of B₄C-ZrO₂ mixtures, more significantly during the intermediate stage. Within the relative density ranging from 0.75 to 0.90, the B₄C-15?wt%ZrO₂ mixture (B15Z) achieved the maximum densification rate as twice much as that of pure B₄C. The stress exponent n>3 indicated plastic deformation was the dominant densification mechanism of B15Z. The viscosities of plastic flow were evaluated using Murray-Rodger-William equation and the viscosity of B15Z was only a quarter of that in pure B₄C. The sintering activation energy was calculated to be 305.9?kJ/mol for pure B₄C and 197?kJ/mol for B15Z, respectively. It was proposed that the lower viscosity of plastic flow and activation energy accelerated the sliding and propagating motions of plastic flow, by which underlain the enhanced densification behaviors of B₄C-ZrO₂ mixtures.     

New anti-ablation candidate for carbon/carbon composites: Preparation,composition and ablation behavior of Y2Hf2O7 coating under an oxyacetylene torch

Y₂Hf₂O₇ possesses low thermal conductivity and high melting point, which make it promising for a new anti-ablation material. For evaluating the thermal stability and the potential applications of Y₂Hf₂O₇ on anti-ablation protection of C/C composites, Y₂Hf₂O₇ ceramic powder was synthesized by solution combustion method and Y₂Hf₂O₇ coating was prepared on the surface of SiC coated C/C composites using SAPS. Results shown that the coating exhibits good ablation resistance under the heat flux of 2.4?MW/m² with the linear and mass ablation rates are 0.16?μm?s^?1 and ?0.028?mg?s^?1, respectively, after ablation for 40?s. With the prolonging of the ablation time, the increasing thermal stress causes the increase of cracks. Moreover, the chemical erosion from SiO₂ and the physical volatilization of low temperature molten products aggravate failure of the Y₂Hf₂O₇ coating.