粪便水对大坦沙污水厂生产运行的影响及控制措施

广州市大坦沙污水处理厂承担着全市粪便水的处理任务。生产实践表明，由粪便水造成的水质冲击负荷对生产运行不利，导致设备维护率提高、运行成本增加。通过建造粪便水调节池、调整工艺参数、加大设备维修和技术改造力度、对恶臭源进行加盖除臭等措施可以降低粪便水对生产运行的影响。     

Analysis of S-SEED''s characteristics in optical switch

This article introduces the basic structure of a symmetric self-electrooptic effect device （S-SEED）, and applies the Kirchoff＇ s current law and a purely equivalent capacitive model, to analyze S-SEED＇s switch characteristics. Linear approximation and N-segment approximation are utilized to obtain S-SEED＇s voltage-time （V-T） and characteristics. Theoretical analysis is verified by simulations, and the results demonstrate that the precision of S-SEED＇s switch time can satisfy the requirement in applications with linear approximation. Moreover, the simulations compare S-SEED＇s switch characteristics with different input powers and input contrast ratios, which reveal that increasing input contrast ratio is an effective way to improve S-SEED＇s switch characteristics.     

Al2O3对镁铬耐火材料致密化的影响

为了提高镁铬耐火材料的烧结性能,通过考察气孔率、体积密度和常温耐压强度与Al2O3加入量之间的关系,讨论了Al2O3添加剂对两种不同镁铬耐火材料致密化的影响.结果表明,镁铬耐火材料的骨料不同,Al2O3对其烧结性能和致密化的影响也不一样.     

聚合物基金属梯度复合材料的制备与结构研究

本文通过石墨阴极溶液涂膜法制得甲基丙烯酸-丙烯酸共聚物[P(MMA-co-MAA)]与环氧乙烷(PEO)的共混聚合物,并以其为基质制备了聚合物基铜金属复合膜(CPCFs).在这一过程中,对所得溶胀阴极膜(SCF)进行半干燥处理后,用电化学方法使其还原以得最终产物.实验研究表明:(1)低P(MMA-co-MAA)含量会增强SCF的离子电导率;(2)还原反应中酸性环境会增强电导性;(3)水-乙醇共溶剂有助于增强电导率.偏光显微镜测试显示:poly(MMA-co-MAA)会影响PEO的结晶.X-射线衍射实验也证实了还原铜金属单质的存在.     

SGM装车机油的研制和应用

中国石化上海高桥分公司炼油厂针对上海通用汽车有限公司(SGM)的别克轿车，先后进行了9986126SGM、9986125SGM装车机油的开发认证工作以及研制油在别克车上的适应性试验。配方研制遵照ACC规范、API基础油互换规则及粘度等级互换规则，各项性能满足技术指标规定的质量要求；同时30000km的高温高速行车试验结果表明，研制油具有较好的抑制氧化增稠能力、优良的高温抗氧化性能、清净分散性能和抗磨损性能，在上海通用别克轿车上取得了良好的使用效果。     

《天津市预防混凝土碱-集料反应技术规程》的修订说明

修订过程《天津市预防混凝土碱-集料反应技术规程》DB29-176-2007(以下简称本规程)是在《天津市预防混凝土碱-集料反应技术管理规定(试行)》JJG14-2000(以下简称原规定)的基础上,由天津市建筑科学研究院修订完成。     

关于从旋涡炉渣回收铜的研究

介绍了用自然澄清法降低、回收旋涡炉渣中的铜的方法。该方法工艺简单。操作方便，不仅降低冶炼成本，同时提高了经济效益。     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

一种改进的图像域SAR目标散射中心特征提取方法

散射中心是SAR图像目标识别的重要特征。本文基于属性散射中心模型，在文献[6]的基础上，提出了一种改进的图像域SAR目标散射中心特征提取方法。在该方法中，通过引入参数规则化处理步骤，解决了属性散射中心特征提取方法的收敛问题，提高了属性散射中心特征参数估计的精度和效率；提出了一种能同时实现散射中心数目确定和结构判别的方法，实现了散射中心类型的可靠判别。仿真数据和MSTAR实测SAR图像数据的实验结果，验证了本文改进的图像域SAR目标散射中心特征提取方法的有效性。     

Special Apodized Fiber Bragg Grating for Flat—top Band—pass Reflectivity Filter

The characteristics of special apodized fiber Bragg grating (FBG) in flat--top pass--band as reflectivity filter are presented. This special apodized FBG was designed by the particle swarm optimization algorithm. Compared with conventional apodized FBG, the special apodized FBG presented was more robust in the flat—top pass——band characteristic even if the strength of grating is very week. This technology is very interesting in designing the filter for wavelength division multiplexing system.