Protective layer for high‐efficiency PDPs driven at low voltage

Abstract— The sustain pulse voltage of a panel for 66‐kPa Ne + Xe (5–30%) with an (SrCa)O protective layer is 20–40% lower than that with an MgO protective layer. The luminous efficiency of the panel with a Ne + Xe (30%) (SrCa)O protective layer is 1.5 times that of the conventional panel with a Ne + Xe (10%) MgO protective layer; the sustain pulse voltages of these panels are almost the same. The power loss caused by panel capacitance is proportional to the second power of the sustain pulse voltage. Using the (SrCa)O protective layer for Xe (5–30%), the power loss is reduced by 35–60% compared with the MgO protective layer. It follows that, using the (SrCa)O protective layer, we can increase the Xe content with little power loss and thus achieve high‐efficiency PDPs. As for MgO and CaO with Xe ions, electrons are probably ejected from only the defect states. On the other hand, as for the SrO with Xe ions, it is likely that electrons can be ejected from not only defect states but also the valance band. This seems to be the reason why the driving voltage is lower with the (SrCa)O protective layer than with the MgO protective layer.     

Laser Thomson scattering and optical emission studies of striated PDP micro‐discharge plasmas

Abstract— Properties of a plasma‐display‐panel (PDP) like discharge were examined by emission and laser Thomson scattering (LTS) measurements. Emission measurements were performed using an intensified CCD camera. By varying several external parameters such as the amplitude of the input voltage, gas composition, and pressure, the influence of these parameters on the discharge behavior was studied. Results of emission measurements showed that they were in good agreement with similar emission measurements on real PDP cells. LTS measurements were performed for the striated PDP‐like discharge at a pressure of 100 Torr and the results showed clear modulations in both profiles of electron density and electron temperature.     

Stability tests and stabilization for piecewise linear systems based on poles and zeros of subsystems

This paper provides several stability tests for piecewise linear systems and proposes a method of stabilization for bimodal systems. In particular, we derive an explicit and exact stability test for planar systems, which is given in terms of coefficients of transfer functions of subsystems. Restricting attention to the bimodal and planar case, we show simple stability tests. In addition, we drive a necessary stability condition and a sufficient stability condition for higher-order and bimodal systems. They are given in terms of the eigenvalue loci and the observability of subsystems. All the stability tests provided in this paper are computationally tractable, and our results are applied to the stabilizability problem. We confirm the exactness and effectiveness of our approach by illustrative examples.     

A Social Robot that Stands in Line

Recent research in mobile robot navigation make it feasible to utilize autonomous robots in service fields. But, such applications require more than just navigation. To operate in a peopled environment, robots should recognize and act according to human social behavior. In this paper, we present the design and implementation of one such social behavior: a robot that stands in line much as people do. The system employs stereo vision to recognize lines of people, and uses the concept of personal space for modeling the social behavior. Personal space is used both to detect the end of a line and to determine how much space to leave between the robot and the person in front of it. Our model of personal space is based on measurements from people forming lines. We demonstrate our ideas with a mobile robot navigation system that can purchase a cup of coffee, even if people are waiting in line for service.     

Spatial indexing of high-dimensional data based on relative approximation

We propose a novel index structure, the A-tree (approximation tree), for similarity searches in high-dimensional data. The basic idea of the A-tree is the introduction of virtual bounding rectangles (VBRs) which contain and approximate MBRs or data objects. VBRs can be represented quite compactly and thus affect the tree configuration both quantitatively and qualitatively. First, since tree nodes can contain a large number of VBR entries, fanout becomes large, which increases search speed. More importantly, we have a free hand in arranging MBRs and VBRs in the tree nodes. Each A-tree node contains an MBR and its children VBRs. Therefore, by fetching an A-tree node, we can obtain information on the exact position of a parent MBR and the approximate position of its children. We have performed experiments using both synthetic and real data sets. For the real data sets, the A-tree outperforms the SR-tree and the VA-file in all dimensionalities up to 64 dimensions, which is the highest dimension in our experiments. Additionally, we propose a cost model for the A-tree. We verify the validity of the cost model for synthetic and real data sets. Edited by T. Sellis. Received: December 8, 2000 / Accepted: March 20, 2002 Published online: September 25, 2002     

Generalized stress intensity factors in the interaction between two fibers in matrix

To evaluate the mechanical strength of fiber reinforced composites it is necessary to consider singular stresses at the end of fibers because they cause crack initiation, propagation, and final failure. The singular stress is expressed by generalized stress intensity factors defined at the corner of fibers. As a 2D model an interaction between rectangular inclusions under longitudinal tension is treated in this paper. The body force method is used to formulate the problem as a system of singular integral equations with Cauchy-type or logarithmic-type singularities, where the unknown functions are the densities of body forces distributed in infinite plates having the same elastic constants as those of the matrix and inclusions. In order to analyze the problem accurately, the unknown functions are expressed as piecewize smooth functions using two types of fundamental densities and power series, where the fundamental densities are chosen to represent the symmetric stress singularity of 1/r ^1– ₁ and the skew-symmetric stress singularity of 1/r ^1– ₂. Then, generalized stress intensity factors at the end of inclusions are systematically calculated for various locations, spacings and elastic modulus of two rectangular inclusions in a plate subjected to longitudinal tension.     

The circadian variation of urinary N-acetyl-beta-D-glucosaminidase and gamma-glutamyl transpeptidase in clinically healthy cats

The circadian variation of urinary N-acetyl-beta-D-glucosaminidase (NAG, EC 3.2.1.30) and gamma-glutamyl transpeptidase (gamma-GTP, EC 2.3.2.2) was evaluated in cats. Urine and blood were collected at 4-hr intervals from adult cats (3 males, 9 females) weighing between 2.6 and 5.0 kg. There was no circadian variation in the urine volume, creatinine clearance, creatinine excretion, NAG excretion or gamma-GTP excretion. The average NAG and gamma-GTP indices in the 4-hr urine were similar to those for the 24-hr urine. However, the variance for the 4-hr urine samples was higher than that of 24-hr urine. In conclusion, although 4-hr urine samples can be used to estimate 24-hr urinary enzyme excretion, short-term spot urine samples may cause increased variation in the enzyme index.     

Effective resistance of current-carrying superconducting wire in oscillating magnetic fields 1: Single core composite conductor

The influence of oscillating magnetic fields on the dc transport current in a single core superconducting wire has been studied by observing the terminal voltage of the wire. The voltage versus oscillating field characteristics can be explained quantitatively by a theoretical analysis based on the critical state model. The analysis shows that the voltage measurement gives detailed information on the change of the distribution of the magnetic induction inside the superconductor. An effective resistance appears in the transport current loop when the amplitude of the oscillating field exceeds a certain threshold value. The dependence of the effective resistance on the amplitude and frequency of the oscillating field and on the conductor diameter is discussed.     

Surface magnetism of type II superconductors

The magnetization of a type II superconductor in the mixed state is a sum of two contributions, one from an array of flux lines and the other from shielding currents flowing along the surface. The former can be evaluated with the help of results of neutron diffraction experiments, using an extrapolation procedure. The observed magnetization curve thus enables us to estimate the surface contribution. This process is applied to the data on niobium obtained by Schelten, Ullmaier, and Lippmann. It is found that at low temperatures (T/T _c =0.161 and 0.457), the surface contribution may not be reduced atH _c2 as much as theories predict. At higher temperatures (T/T _c =0.717 and 0.891), it is likely to be paramagnetic in a region rather close toH _c1 . Attractive interaction between flux lines is suggested to be a mechanism of this anomaly. However, more experimental and theoretical work is needed to establish these findings to help us understand the surface magnetism of type II superconductors.