Hydrogen‐bonding interaction between poly(ε‐caprolactone) and low‐molecular‐weight amino compounds

The specific interactions between several low‐molecular‐weight diamino compounds and poly(ε‐caprolactone) (PCL) have been investigated by FT‐IR. It was found that PCL and 3,3′‐diaminodiphenylmethane (3,3′‐DADPM) interact through strong intermolecular hydrogen bonds in the blend. Thermal and mechanical properties of PCL/3,3′‐DADPM blends were investigated by DSC and tensile measurements, respectively. The glass transition temperature of the blend increases while both the melting point and the elongation‐at‐break of the blend decrease with the increase of 3,3′‐DADPM content. Besides 3,3′‐DADPM, several other low‐molecular‐weight compounds containing two amino groups, such as o‐phenylenediamine or 1,6‐diaminohexane, were also added into PCL and the corresponding blend systems were investigated by FT‐IR and DSC. The effect of the chemical structure of the additives on the properties of PCL is discussed. © 2001 Society of Chemical Industry     

Effect of Ultrasonication on the Microstructure and Tensile Elongation of Zirconia-Dispersed Alumina Ceramics Prepared by Colloidal Processing

To obtain dense, fine-grained ceramics, fine particles and advanced powder processing, such as colloidal processing, are needed. Al₂O₃ and ZrO₂ particles are dispersed in colloidal suspensions by electrosteric repulsion because of polyelectrolyte absorbed on their surfaces. However, additional redispersion treatment such as ultrasonication is required to obtain dispersed suspensions because fine particles tend to agglomerate. The results demonstrate that ultrasonication is effective in improving particle dispersion in suspensions and producing a homogeneous fine microstructure of sintered materials. Superplastic tensile ductility is improved by ultrasonication in preparing suspensions because of the dense and homogeneous fine microstructure.     

Effect of sintering additive on crystallographic orientation in AlN prepared by slip casting in a strong magnetic field

The preparation of oriented AlN bulk ceramics with and without additives was achieved by slip casting in a high magnetic field. The a and b axes of the AlN were aligned parallel to the direction of the magnetic field. The degree of crystallographic orientation was controlled by the viscosity of the slurry and the grain growth during sintering attributed to the sintering additives. The mechanical properties of the textured AlN depended on the direction of the crystallographic orientation.     

An experimental study on moisture transport through a porous plate with micro pores

An experiment was carried out to examine heat and mass transfer between constant-temperature water and dry air through a porous plate having extremely small pores. The effects of the thermal conductivity in the porous plate on moisture transport were investigated. The controlling factor for moisture transport was found to be the thermal resistance inside the porous plate having a low-thermal-conductivity and the heat transfer at the surface of the porous plate having a high-thermal-conductivity.     

Synthesis of optical quality ZnO nanowires utilizing ultrasonic spray pyrolysis

ZnO nanowires were grown by an ultrasonic spray pyrolysis technique. The aspect ratio and size of the wire were dependent mainly on the pH value of a precursor solution and the growth temperature. By high-resolution transmission electron microscopic analysis and photoluminescence measurements, it was confirmed that the nanowires are monocrystalline with good optical quality.     

Microstructure of a Molybdenum Nitride Layer Formed by Nitriding Molybdenum Metal

For pure molybdenum nitrided at 1373 K in NH₃ gas, microstructural observations of a molybdenum nitride layer were conducted through a transmission electron microscope. The molybdenum nitride layer consisted of two molybdenum nitrides: an outer one of γ-Mo₂N and an inner one of β-Mo₂N. A great number of (011)[0     1] type twins were observed in the β-Mo₂N phase, whereas the microstructure of the γ-Mo₂N phase was almost free from lattice defects except for slightly observed {111}〈112〉 type twin.     

AstroSim: Collaborative Visualization of an Astrophysics Simulation in Second Life

Developed in the Second Life 3D online multiuser environment, AstroSim (astrophysics simulation) provides synchronous collaborative visualization for astronomers. Users can play, halt, and rewind simulations and annotate stars interactively to track individual stars and gain a better understanding of stellar dynamics and astrophysics phenomena. This article is part of a special issue on collaborative visualization.     

Liquid lithium divertor system for fusion reactor

One of the most critical issues for the steady state fusion reactor is the heat flux in the divertor target. This paper proposes a liquid lithium divertor system to solve this problem. The proposed divertor system consists of a liquid lithium target, an evaporation chamber and a differential evacuation chamber. The heat coming from the fusion plasma along the divertor leg is removed by evaporation of lithium. The lithium vapor is condensed on the wall and is circulated with a pump. The coolant temperature for the wall is high enough to drive a power generator. Narrow slits along the divertor leg and the differential evacuation chamber reduce leakage of lithium vapor to the plasma chamber. A preliminary estimation predicts that the lithium ion density in the core plasma is lower than the plasma density.