Characteristics and Reactivity of Lignin in Acacia and Eucalyptus Woods

The chemical characteristics of lignin, including the Klason lignin content, acid-soluble lignin content, proportion of the aromatic ring types [syringyl ratio = syringyl/(syringyl + guaiacyl)], and proportion of the diastereomeric forms for the β-O-4 structure [erythro ratio = erythro/(erythro + threo)], and pulpability were investigated for 28 wood samples belonging to the genera Acacia and Eucalyptus. Although the lignin characteristics of these 28 woods varied widely, the chemical characteristics of the two genera could be categorized in two clearly distinguished groups on the basis of the syringyl ratio. Clear negative correlations were observed between both the syringyl and erythro ratios and the total lignin content (sum of the Klason and acid-soluble lignin contents) within each genus. In addition, the syringyl ratio correlated positively with the erythro ratio and acid-soluble lignin content, regardless of the genus. The existence of a clear, high correlation between the syringyl and erythro ratios supports the hypothesis that the aromatic ring type (syringyl ratio) is a decisive factor for controlling the diastereomeric forms of the β-O-4 structure (erythro ratio). Each of the wood samples was also subjected to Kraft pulping, and it was demonstrated that the woods with higher syringyl ratios were easier to delignify. This tendency is reasonably attributed to the high reactivity of the erythro-rich and syringyl-rich β-O-4 structures, and the low lignin content of these syringyl-rich woods.     

Construction of superconducting bulk magnet magnetron sputtering apparatus for fabrication of highly reflective optical mirrors

We have developed the two-cathode magnetron sputtering apparatus equipped with superconducting permanent magnet to produce Mo/Si multi-layer films, which would potentially serve as a high-quality optical mirror at extreme ultraviolet (EUV) wavelength of 13.5 nm. The best deposition condition was searched by analyzing the structure of the inter-diffusion layer formed in the Mo/Si bi-layer film prepared under different deposition conditions. It was found that (1) Xe gas should be used as inert gas species, (2) its pressure is lower than 4 × 10⁻² Pa, (3) a throw distance is longer than 250 mm and (4) discharge voltage around 2 kV. By making full use of these data, we synthesized Mo/Si multi-layer films and analyzed the structure and its effect on the reflectivity. The highest EUV-reflectivity so far obtained is 67% in the normal incident condition.     

Nanosurface-confined anisotropic growth and magnetism of ellipsoidal alpha-Fe nanogranules

We have investigated the nanosurface-confined anisotropic growth of ordered-ellipsoidal Fe nanogranules when an Fe plume was deposited at a slanting angle onto an anodized aluminum oxide (AAO) film. Layer-by-layer growth was also investigated. This growth is driven by two critical factors: (1) a new rhombic AAO cell and (2) the slanting deposition of the Fe plume. During slanting deposition, the rhombic AAO cell induces strong restrictions in the nucleation site, growth direction, and granular size; therefore, the degree of freedom during growth is restricted. The magnetic dipoles of the ordered Fe nanogranules are placed along the long axis of the ellipsoid at an angle of 180 degrees (antiparallel) due to the demagnetizing field, shape anisotropy, and magnetic dipole-to-dipole interactions.     

Iron–Nitrogen‐Doped Vertically Aligned Carbon Nanotube Electrocatalyst for the Oxygen Reduction Reaction

A highly active iron–nitrogen‐doped carbon nanotube catalyst for the oxygen reduction reaction (ORR) is produced by employing vertically aligned carbon nanotubes (VA‐CNT) with a high specific surface area and iron(II) phthalocyanine (FePc) molecules. Pyrolyzing the composite easily transforms the adsorbed FePc molecules into a large number of iron coordinated nitrogen functionalized nanographene (Fe–N–C) structures, which serve as ORR active sites on the individual VA‐CNT surfaces. The catalyst exhibits a high ORR activity, with onset and half‐wave potentials of 0.97 and 0.79 V, respectively, versus reversible hydrogen electrode, a high selectivity of above 3.92 electron transfer number, and a high electrochemical durability, with a 17 mV negative shift of E _1/2 after 10 000 cycles in an oxygen‐saturated 0.5 m H₂SO₄ solution. The catalyst demonstrates one of the highest ORR performances in previously reported any‐nanotube‐based catalysts in acid media. The excellent ORR performance can be attributed to the formation of a greater number of catalytically active Fe–N–C centers and their dense immobilization on individual tubes, in addition to more efficient mass transport due to the mesoporous nature of the VA‐CNTs.     

Efficient characterization for protein crystals using confocal Raman spectroscopy

Confocal Raman spectroscopy was applied to the characterization of various states emerging in the screening of protein crystallization. Four main characterized states, namely single crystals, microcrystals, precipitates, and clear drops without solid materials, appear in a droplet for crystallization; the first three states should be critically distinguished and characterized because of the limitations of visual observation under an optical microscope. Using lysozyme and other proteins, crystallization was performed by the hanging drop vapor diffusion technique and was monitored through an automated confocal Raman system. Prior to the spectroscopic analysis, an optical microscope with a charge-coupled device (CCD) camera and associated image processing software were used to rapidly identify the XY locations to be measured spectroscopically by focusing the laser beam on a test sample. Instead of the current image analysis by optical microscopy, confocal Raman spectroscopy with a high spatial resolution was used to identify the state of protein crystallization. Such real-time Raman monitoring also distinguished real protein crystals from pseudo-protein crystals emerging in a crystallization droplet.     

Insights on interfacial charge transfer across P3HT/fullerene photovoltaic heterojunction from Ab initio calculations

The interfacial charge-transfer mechanism of the P3HT/fullerene photovoltaic heterojunction is elucidated using density functional theory calculations. Our findings indicate that an efficient adiabatic electron transfer is highly probable due to the presence of an extended electronic state that has a significant probability distribution across the interface in the lowest excited state. Furthermore, efficient exciton dissociation is possible because this bridging state has significant overlap with near-degenerate unoccupied states that are localized on the fullerene.     

Autotaxin May Have Lysophosphatidic Acid-Unrelated Effects on Three-Dimension (3D) Cultured Human Trabecular Meshwork (HTM) Cells

Purpose: The objective of the current study was to evaluate the effects of the autotaxin (ATX)–lysophosphatidic acid (LPA) signaling axis on the human trabecular meshwork (HTM) in two-dimensional (2D) and three-dimensional (3D) cultures of HTM cells. Methods: The effects were characterized by transendothelial electrical resistance (TEER) and FITC-dextran permeability (2D), measurements of size and stiffness (3D), and the expression of several genes, including extracellular matrix (ECM) molecules, their modulators, and endoplasmic reticulum (ER) stress-related factors. Results: A one-day exposure to 200 nM LPA induced significant down-sizing effects of the 3D HTM spheroids, and these effects were enhanced slightly on longer exposure. The TEER and FITC-dextran permeability data indicate that LPA induced an increase in the barrier function of the 2D HTM monolayers. A one-day exposure to a 2 mg/L solution of ATX also resulted in a significant decrease in the sizes of the 3D HTM spheroids, and an increase in stiffness was also observed. The gene expression of several ECMs, their regulators and ER-stress related factors by the 3D HTM spheroids were altered by both ATX and LPA, but in different manners. Conclusions: The findings presented herein suggest that ATX may have additional roles in the human TM, in addition to the ATX–LPA signaling axis.     

Propagation characteristics of impulse creepage discharge in perfluorocarbon liquid

In this paper, the propagation characteristics of a creepage discharge on the surface of a solid insulator with a back electrode in perfluorocarbon liquid under an impulse voltage application are investigated. The propagation process is observed in detail by means of a high‐speed schlieren optical technique, and simultaneously waveforms of a current and a charge are also measured. Consequently, the polarity effect of the streamer propagation and the positive streamer which propagates stepwise can be seen. The latter is concurrent with the sparse current pulse which corresponds to the charge step‐variation. These results are compared with ones obtained in transformer oil. © 2000 Scripta Technica, Electr Eng Jpn, 131(4): 19–28, 2000     

Improvement in heat transfer performance by employing unique screen inserts in a horizontal heat pipe under small heat flux conditions

Two kinds of screen mesh inserts were produced with unique cross-sectional shapes (NW2 and NW3) to improve heat transfer in a horizontal evaporating tube under small heat flux conditions. These inserts were expected to supply liquid from the thick bottom layer to the upper (top) part of a heated horizontal round tube, which is the most difficult part to wet. In the present work, heat transfer performances were investigated experimentally by using a horizontal heat pipe with a visual observation capability. The experimental results showed that NW2 and NW3 worked well if the heat flux was less than 8 kW/m². This improvement was confirmed by comparison with both the data for an ordinary screen-mesh wick and calculated results based on an analytical model. © 1998 Scripta Technica, Heat Trans Jpn Res, 26(8): 529–540, 1997     

High-speed melt spinning of bicomponent fibers: Mechanism of fiber structure development in poly(ethylene terephthalate)/polypropylene system

High-speed bicomponent spinning of poly(ethylene terephthalate)(PET)(core) and poly-propylene (PP) (sheath) was carried out and the structure development in the individual components, PET and PP, was investigated. The orientation and crystallinity development in the PET component was enhanced as compared to that of the single-component spinning while the PP component remained in a low orientation state and had a pseudohexagonal crystal structure even at high take-up speeds. To clarify the mutual interaction between the two components in bicomponent spinning, a semiquantitative numerical simulation was performed. The simulation results obtained using the Newtonian fluid model showed that the solidification stress in the PET component was enhanced while that of the PP component was decreased in comparison with the corresponding single-component spinning. This is due to the difference in the temperature dependence of their elongational viscosity. Simulation with an upper-convected Maxwell model as the constitutive equation suggested that significant stress relaxation of the PP component can occur in the spinline if the PET component solidifies earlier than does PP. Based on the structural characterization results, and the simulation results, it was concluded that the difference in the activation energy of the elongational viscosity and solidification temperature between the two polymers are the main factors influencing the mutual interaction in the bicomponent spinning process. © 1996 John Wiley & Sons, Inc.