THERMODYNAMICS OF MARTENSITIC TRANSPORMATION IN β-Cu BASE ALLOYS

提出对β-Cu基合金热弹性马氏体相变的热力学处理。计算了Cu-Zn,Cu-Al及Cu-Zn-Al合金马氏体相变驱动力,T_0温度及M_s温度,M_s的计算值与实验值符合很好。母相有序降低Cu-Zn和Cu-Zn-Al的M_s,但升高Cu-Al的M_s(T_0)。并简介了两种估算非化学自由能的方法。     

激光合金化熔池成分均匀性与形状系数的关系SCIEI

本文研究了激光工艺参数对镀Cr中碳低合金钢激光合金化熔池形状系数及成分均匀性的影响。实验结果表明,熔池成分均匀性取决于其截面形状系数,后者是光束功率密度和交互作用时间的函数。在功率密度一定时,形状系数与交互作用时间成线性关系。当形状系数为1.6—3.0时,可以获得成分均匀的熔池。     

FRACTURE ANALYSIS OF HYDROGEN-INDUCED CRACKING FOR STEEL 12Ni3CrMoV

本文通过插销断口分析,研究了含硼12Ni3CrMoV钢焊接热影响区氢浓度及应力大小与断口形态之间的关系,结果表明,插销断口具有氢脆准解理特征,断口上氢脆准解理区域随氢浓度的升高而增加,随负载应力的加大而减小.准解理断裂面为{110}面.     

传动轴套管叉花键冷挤压工艺研究

通过采用刚塑性有限元法,利用先进成熟的变形三维模拟软件,对传动轴套管叉花键零件的冷挤压工艺的全过程进行了计算机数值模拟,为该零件的该零件的冷挤压成型工艺优化、工装设计提供了理论依据.     

New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.     

Behavior of calcium silicate in leaching process

1　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｇｅｎｅｒａｌ ,ａｌｕｍｉｎａｃａｎ ｔｂｅｐｒｏｄｕｃｅｄｅｃｏｎｏｍｉｃａｌｌｙｂｙＢａｙｅｒｐｒｏｃｅｓｓｉｎＣｈｉｎａｂｅｃａｕｓｅｔｈｅｂａｕｘｉｔｅｃｈａｒａｃｔｅｒ ｉｚｅｓｉｎｄｉａｓｐｏｒｅａｎｄａｂｏｕｔ 80 %ｂａｕｘｉｔｅｅｘｉｓｔｉｎｌｏｗｄｅ ｇｒｅｅｏｆｔｈｅｍａｓｓｒａｔｉｏｏｆａｌｕｍｉｎａｔｏｓｉｌｉｃａ(Ａ/Ｓ)ｗｈｉｃｈｖａｒｉｅｓｆｒｏｍ 4ｔｏ 9[1] .Ａｎｄａｂｏｕｔ 4 0 %ｏｆａｌｕｍｉｎａｉｓｐｒｏ ｄｕｃｅｄｂｙｓｉｎｔｅｒｉｎｇ…     

WZ型系列真空铝钎焊炉的研制

简要介绍了WZ型系列真空铝钎焊炉型号，规格等技术参数，并以WZLQH－30型真空铝钎焊炉为例介绍了真空铝钎焊炉的结构及其特点，总结了真空铝钎焊炉设计研究及调试过程中的一些经验体会。     

3DEC modeling on effect of joints and interlayer on wave propagation

1 Introduction Natural rock mass is not homogeneous, and it is full of various weak planes with different structures and different geological mechanisms, such as fractures, joints, and cracks. These structural weak planes seriously hinder and affect the …     

人工智能在冷轧带肋钢筋工艺参数优化中的应用

论述了人工智能在冷轧带肋钢筋工艺参数优化中的应用,首先利用神经网络建立起冷轧带肋钢筋工艺参数与产品抗拉强度之间关系的数学模型,然后用遗传算法对工艺参数优化。按优化后的工艺参数在某拉丝加工厂进行了大批量生产试验,产品的合格率达到98%以上,从而为控制冷轧带肋钢筋工艺参数提供了一条行之有效的途径。     

负载敏感液控多路阀性能测试

介绍了负载敏感多路阀性能测试系统.根据多路阀功能测试的需要进行液压测试回路设计;采用多通道数据采集设备来完成液压测试系统多项性能的信号采集;以LabVIEW7.1作为开发工具,开发了适应性较强的测试软件进行测试数据保存和曲线输出.根据测试数据和曲线,分析了多路阀的性能.