抵御已知/选择明文攻击的混沌图像加密算法

论文在对现有一类典型图像混沌加密算法的分析基础上,提出了一种改进的图像混沌加密算法。该算法引入小波变换,可以有效地克服一些混沌加密算法不能抵御已知/选择明文攻击的缺陷。     

MPTA型原油脱金属剂的工业应用

在对高金属含量原油进行初步评价的基础上，利用SH—Ⅰ型电脱盐试验仪对自主开发的MPTA型原油脱金属剂进行了原油脱金属的实验室研究。结果表明，当MPTA型脱金属剂加入量为250μg／g时，钙的脱除率可达97．4％，并且对其它金属元素，如镍、铁、钠、锰、铝和钒也有明显的脱除效果。该剂在山东恒源石油化工股份有限公司重交沥青车间500kt／a的电脱盐装置上进行原油脱金属工业试验的结果表明，经过二级电脱盐处理后，钙的脱除率达到99．1％，钠的脱除率为94．6％，铁的脱除率为82．9％，并可在一定程度上降低原油中镍和铜的含量。使用MPTA型原油脱金属剂显著降低了一、二级电脱盐装置的电场电流，有利于炼油厂的节能降耗。     

A survey of quality of service in IEEE 802.11 networks

Developed as a simple and cost-effective wireless technology for best effort services, IEEE 802.11 has gained popularity at an unprecedented rate. However, due to the lack of built-in quality of service support, IEEE 802.11 experiences serious challenges in meeting the demands of multimedia services and applications. This article surveys 802.11 QoS schemes, including service differentiation in the MAC layer, admission control and bandwidth reservation in MAC and higher layers, and link adaptation in the physical layer, designed to meet these challenges by providing the necessary enhancements for the required QoS. Furthermore, the article addresses issues that arise when end-to-end QoS has to be guaranteed in today's pervasive heterogeneous wired-cum-wireless networks. Among these challenges, protocol interoperability, multihop scheduling, full mobility support, and seamless vertical handoff among multiple mobile/wireless interfaces are specifically addressed.     

流变仪在覆铜板工序中的应用

本文简要叙述利用流变仪对覆铜箔层压板生产工序中的胶液和半固化片参数进行控制,从而更好地保证胶液和 半固化片性状的一致性,以有利于控制板材流胶和品质。     

一次量子通信QKD和QA协议

提出一种通过一次量子通信同时实现密钥分发(QKD)和量子认证(QA)的方案.此方案基于GHZ态的相关性,事先在|△＞态制备n对处于纠缠态的量子位.最后证明了此协议是有效和绝对安全的.     

Wavelength and Waveband Assignment for Ring Networks Based on Parallel Multi‐granularity Hierarchical OADMs

In this paper we study the optimization issues of ring networks employing novel parallel multi‐granularity hierarchical optical add‐drop multiplexers (OADMs). In particular, we attempt to minimize the number of control elements for the off‐line case. We present an integer linear programming formulation to obtain the lower bound in optimization, and propose an efficient heuristic algorithm called global bandwidth resource assignment that is suitable for the design of large‐scale OADM networks.     

HDI工艺中取代涂树脂铜箔适合激光钻孔的半固化片

应用于HDI的激光钻孔半固化片的方法和其它常规材料相比具有的优缺点。     

A regenerable Fe/AC desulfurizer for SO2 adsorption at low temperatures

A novel regenerable Fe/activated coke (AC) desulfurizer prepared by impregnation of Fe(NO₃)₃ on an activated coke was investigated. Experiment results showed that at 200 °C the SO₂ adsorption capacity of the Fe/AC was higher than that of AC or Fe₂O₃. Temperature-programmed desorption (TPD) revealed that H₂SO₄ and Fe₂(SO₄)₃ were generated on the desulfurizer upon adsorption of SO₂. Effect of desulfurization temperature was also investigated which revealed that with increasing temperature from 150 to 250 °C, the SO₂ removal ability gradually increases. The used Fe/AC can be regenerated by NH₃ at 350 °C to directly form solid ammonium-sulfate salts.     

Fatigue crack growth in SiC particulates reinforced Al matrix graded composite

The SiC/Al graded composite was fabricated by powder metallurgy processing and its fatigue crack growth behavior was studied. The volume percentage of SiC particulates was distributed from 5 to 30% layer by layer on the cross section. Since the aluminium was dissolved together, there was no evident interface between the two layers with different volume fraction of SiC particulates. Fatigue crack growth was in direction of from 5 to 30% SiC layers under sinusoidal wave-form. The retardation of fatigue crack growth was found when crack propagated from low volume fraction of SiC to high volume fraction of SiC. The crack deflection and branching between two layers were observed, which decreased crack growth rates. In view of crack tip driving force, the plasticity mismatch between the layers shielded crack tip driving force, i.e. decreased the effective J-integral at the tip of the crack as the plastic zone of the crack tip spread from the weaker material into the stronger material.     

阜阳地区石炭-二叠系煤系烃源岩特征

阜阳地区石炭-二叠系煤系地层发育，但由于勘探程度较低，对该区煤系地层烃源岩的生烃潜力认识不清，严重制约了该区的油气勘探。在已有资料的基础上，通过有机地球化学和有机岩石学方法并结合模拟实验，探讨了该区煤系烃源岩的生烃潜力。研究结果表明阜阳地区石炭-二叠系煤系烃源岩有机质丰度达到中等-好烃源岩标准，有机质类型以腐殖型为主，盆地模拟结果显示阜阳地区石炭-二叠系煤系地层油资源量为（30.47~152.33）×10⁶t，气资源量为（266.7～1333.7）×10⁸m³，展示阜阳地区石炭-二叠系煤系地层具有较好的生油气潜力。