Rapid prediction method for nonlinear expansion process of medical vascular stent

A neural network model with high nonlinear recognition capability was constructed to describe the relationship between the deformation impact factors and the deformation results of vascular stent.Then,using the weighted correction method with the attached momentum term,the network training algorithm was optimized by introducing learning factor η and momentum factor ψ,so the speed of the network training and the system robustness were enhanced.The network was trained by some practi-cal cases,and the statisti...     

A new type counter electrode for dye-sensitized solar cells

A new type counter electrode for dye-sensitized solar cells (DSCs) was proposed which consists of substrate, aluminum film and platinum film. The new type counter electrode can obviously improve the photoelectric conversion efficiency of DSCs from 3.46% to 7.07% under the standard AM1.5 irradiation condition. Advantages and shortcomings of this new type counter electrode in terms of electrical properties, optical properties and anti-corrosive properties were analyzed. As a result, some improvements were proposed. Supported by the Key Foundation for Fundamental Research of Tianjin Municipal Science & Technology Commission in China ( Grant No. 06YFJZJC01700) and the National Basic Research Program of China (“973“ Project) (Grant Nos. 2006CB20260, 2006CB202603)     

Method of change management based on dynamic machining error propagation

In multistage machining processes(MMPs),the final quality of a part is influenced by a series of machining processes,which are complex correlations.So it is necessary to research the rule of machin-ing error propagation to ensure the machining quality.For this issue,a change management method of quality control nodes(i.e.,QC-nodes) for machining error propagation is proposed.A new framework of QC-nodes is proposed including association analysis of quality attributes,quality closed-loop control,error tracing...     

Equilibrium equations for nonlinear buckling analysis of drill-strings in 3D curved well-bores

With the development of drilling technology, the oil/gas well has evolved from its early vertical straight form to the inclined, horizontal, plane curved, or even 3D curved well-bore. Understanding of the buck-ling behavior of a drill-string in a well-bore is crucial for the success of a drilling operation. Therefore, equilibrium equations for analyzing the buckling behavior of a drill-string in a 3D curved well-bore are required. Based on Love’s equilibrium equations for a curved and twisted rod in space, ...     

A macro-meso constitutive law for concrete having imperfect interface and nonlinear matrix

The overall behavior of concrete depends on its meso structures such as aggregate shape, interface status, and mortar matrix property. The two key meso structure characters of concrete, bond status of interface and nonlinear property of matrix, are considered in focus. The variational structure principle is adopted to establish the macro-meso constitutive law of concrete. Specially, a linear reference composite material is selected to make its effective behavior approach the nonlinear overall behavior of concrete. And the overall property of linear reference composite can be estimated by classical estimation method such as self-consistent estimates method and Mori-Tanaka method. This variational structure method involves an optimum problem ultimately. Finally, the macro-meso constitutive law of concrete is established by optimizing the shear modulus of matrix of the linear reference composite. By analyzing the constitutive relation of concrete established, we find that the brittleness of concrete stems from the imperfect interface and the shear dilation property of concrete comes from the micro holes contained in concrete. Supported by the National Natural Science Foundation of China (Grant Nos. 50679022, 90510017, 50539090) and National Basic Research Program of China (Grant No. 2007CB714104)     

Development of Zr/ZrO<Subscript>2</Subscript> high temperature and high pressure sensors for <Emphasis Type="Italic">in-situ</Emphasis> measuring chemical parameters of deep-sea water

In order to in situ measure chemical parameters of deep-sea water and hydrothermal fluids at midocean ridge(MOR), it is necessary to use high temperature and high pressure chemical sensors.Developing new sensors is essential to measure in-situ pH and other chemical parameters(dissolved H2, dissolved H2S) of deep-sea water and hydrothermal fluids in a wide temperature range(2℃―400℃) at MOR vents.The YSZ(Yttria Stabilized Zirconia, 9%Y2O3) ceramic-based(HgO/Hg) chemical sensors possess excellent electrochemic...     

Thermal activation and radiation quenching characteristics and their application to the pre-dose dating of porcelain

The pre-dose technique is important for thermoluminescence (TL) dating of porcelain. The principle of pre-dose dating is based on two characteristics: thermal activation and radiation quenching of the porcelain. Based on these principles, two measurement methods, "the activation method" and "the quenching method", respectively, have been developed for evaluation of the porcelain paleodose. The paleodose values obtained are the same for the ages in the range of 100―1000 a BP for porcelains measured by these two methods. But for dating at lower age limits (less than 100 a BP), the activation method is more accurate; conversely, at higher age limits (greater than 1000 a BP) the quenching method is more accurate. In addition, two specific calculating methods are described for a few porce-lains having anomalous activation and quenching characteristics that make these two methods invalid.     

Mold deformation in soft UV-nanoimprint lithography

UV-nanoimprint lithography (UV-NIL) using a soft mold is a promising technique with low cost and high throughput for producing the submicron scale large-area patterns. However, the deformations of the soft mold during imprinting process which can cause serious consequences have to be understood for the practical application of the process. This paper investigated the deformation of the soft mold by theoretical analyses, numerical simulations, and experimental studies. We simulated the mold deformation using a simplified model and finite element method. The simulation and the related experimental results agree well with each other. Through the investigation, the mechanism and affected factors of the mold deformation are revealed, and some useful conclusions have been achieved. These results will be valuable in optimizing the imprinting process conditions and mold design for improving the quality of transferred patterns.     

Introduction of fluorin into PBO polymer chains: Toward higher thermal stability and lower dielectric constant

A series of novel fluorinated benzoxazole polymers (6FPBO's) with high thermal stability and low dielectric constant were synthesized by copolymerization of 1,3-diamino-4, 6-dihydroxybenzene dihy-drochloride (DAR), 1,4-benzenedicarboxylic acid (PTA) and various amount of 4'4- (hexafluoroisopro-pylidene) bis (benzoic acid) (BIS-B-AF) in the medium of polyphosphoric acid (PPA). 6FPBO fibers were then obtained via dry-jet wet-spinning technique and characterized by means of Fourier transform infrared (FTIR) spectra, thermogravimetric analysis (TGA), single fiber tensile testing machine and scanning electron microscopy (SEM). FTIR spectrum of 6FPBO fibers indicated that the fluorine groups had been incorporated into PBO molecular chains successfully. TGA curves revealed that 6FPBO fibers possessed high thermal stability just as pure PBO fibers. Moreover, dielectric constant spectrum of 6FPBO exhibited that the polymers had low dielectric constant, especially in the range of high- frequency.     

Experimental investigation and analysis on flexural performance of functionally graded composite beam crack-controlled by ultrahigh toughness cementitious composites

Based on the concept of functionally graded concrete, UHTCC (ultrahigh toughness cementitious composites) material with excellent crack-controlling ability is strategically substituted for part of the concrete, which surrounds the main longitudinal reinforcement in a reinforced concrete member. Investigations on bending behavior of such a functionally graded composite beam crack-controlled by UHTCC (abbreviated as UHTCC-FGC beam) have been carried out. After establishing a theoretical calculation model, the paper discusses the results of four-point bending experiment on long composite beams without web reinforcement, and validates the theoretical formulae through experimental results of UHTCC-FGC beams with different thicknesses of UHTCC layer. Besides improving bearing capacity and saving steel reinforcements, the results indicate that UHTCC-FGC beams can also effectively control the deformation and enhance the ductility of members. At last, the optimal thickness of UHTCC layer in UHTCC-FGC beams has been confirmed, which can not only save materials and improve mechanical performance of members, but also be very effective in preventing corrosion-induced damage and enhancing the durability of members by controlling crack width below 0.05 mm under service conditions. Supported by the Key Program of the National Natural Science Foundation of China (Grant No. 50438010) and the Research and Application Programs of Key Technologies for Major Constructions in the South-North Water Transfer Project Construction in China (Grant No. JGZXJJ2006-13)