Das Problem der verantworteten Therapieentscheidung in der Neonatologie

Definition of the problem: Physicians and nurses who work in neonatology—as in intensive care at all—are often forced to decide whether to stop or to continue with the treatment of a severely ill patient. The literature provides several decision making instruments, which are meant to help and to rationalize such decisions. Method and conclusion: Two of these instruments (“Schema zur ethischen Urteilsbildung nach dem Muster der aristotelischen Ethik”, Honnefelder 1994; “Nimwegener Methode für ethische Fallbesprechung”, Gordijn 1998) were tested by retrospectively examining two cases of our NICU. Results of our study show that the use of a decision making instrument is basically helpful. But the above mentioned instruments showed also shortcomings when used in the framework of neonatology. Therefore we developed the “Kölner Arbeitsbogen zur ethischen Entscheidungsfindung in der Neonatologie”, which is adapted to the specific needs of neonatology.     

Impact of enzymatic mash maceration and storage on anthocyanin and color retention of pasteurized strawberry purées

Strawberry purées were prepared using a commercial polygalacturonase (PG) and a highly purified pectinesterase (PE) preparation, respectively. To elucidate the effect of pectin on color stability following enzymatic pulp maceration, pectin composition was studied by isolating and fractionating the alcohol-insoluble residue from the strawberry purées. The purées were stored at +20 and +4 °C in the dark over a period of 24 weeks monitoring the amounts of monomeric and polymeric anthocyanins as well as antioxidant activities (FRAP, TEAC). Individual anthocyanins were analyzed by HPLC–DAD–MS ⁿ , and color measurements were obtained in the CIE L*a*b* system. Pectin composition was significantly modified following enzymatic maceration of the purées. While PG treatment generally resulted in pectin losses, oxalate-soluble pectins were increased in PE-treated purées. After 24 weeks of storage, the best anthocyanin retention was observed in PE-treated purées. Such products also revealed greatest anthocyanin half-life values and lowest proportion of polymeric pigments. Compared to an untreated control, enzymatic purée maceration using the PG was also beneficial for pigment retention, but less effective than PE. In contrast, color and antioxidant activity were independent of both enzymatic treatments. An initial heating step (90 °C, 10 s) for immediate inactivation of native enzymes such as polyphenoloxidases slightly improved pigment stability, while lowered temperature during mash maceration was less effective. However, by far best color and pigment retention were achieved when the purées were stored at 4 °C in the dark.     

Influence of Surface Modifications on the Spatiotemporal Microdistribution of Quantum Dots In Vivo

For biomedical applications of nanoconstructs, it is a general prerequisite to efficiently reach the desired target site. In this regard, it is crucial to determine the spatiotemporal distribution of nanomaterials at the microscopic tissue level. Therefore, the effect of different surface modifications on the distribution of microinjected quantum dots (QDs) in mouse skeletal muscle tissue has been investigated. In vivo real‐time fluorescence microscopy and particle tracking reveal that carboxyl QDs preferentially attach to components of the extracellular matrix (ECM), whereas QDs coated with polyethylene glycol (PEG) show little interaction with tissue constituents. Transmission electron microscopy elucidates that carboxyl QDs adhere to collagen fibers as well as basement membranes, a type of ECM located on the basolateral side of blood vessel walls. Moreover, carboxyl QDs have been found in endothelial junctions as well as in caveolae of endothelial cells, enabling them to translocate into the vessel lumen. The in vivo QD distribution is confirmed by in vitro experiments. The data suggest that ECM components act as a selective barrier depending on QD surface modification. For future biomedical applications, such as targeting of blood vessel walls, the findings of this study offer design criteria for nanoconstructs that meet the requirements of the respective application.     

Vergleich des Stofftransports von hängenden und akustisch levitierten Wassertropfen in CO2

High‐pressure acoustic levitation devices allows a contact‐free investigation of liquids. Here, acoustically levitated water droplets and pendant water droplets were examined in regards to the mass transfer coefficient in a static CO₂‐atmosphere under elevated pressures. Based on the droplet geometry and the decrease of the droplet volume over time, it was possible to calculate the mass transfer coefficient of water into CO₂ at any given time. Additionally, open questions regarding possible differences between pendant and acoustically levitated water droplets were discussed.     

Accurate junction detection and characterization in line-drawing images

In this paper, we present a new approach for junction detection and characterization in line-drawing images. We formulate this problem as searching for optimal meeting points of median lines. In this context, the main contribution of the proposed approach is three-fold. First, a new algorithm for the determination of the support region is presented using the linear least squares technique, making it robust to digitization effects. Second, an efficient algorithm is proposed to detect and conceptually remove all distorted zones, retaining reliable line segments only. These line segments are then locally characterized to form a local structure representation of each crossing zone. Finally, a novel optimization algorithm is presented to reconstruct the junctions. Junction characterization is then simply derived. The proposed approach is very highly robust to common geometry transformations and can resist a satisfactory level of noise/degradation. Furthermore, it works very efficiently in terms of time complexity and requires no prior knowledge of the document content. Extensive evaluations have been performed to validate the proposed approach using other baseline methods. An application of symbol spotting is also provided, demonstrating quite good results.     

Ester-functionalized poly(3-alkylthiophene) copolymers: Synthesis,physicochemical characterization and performance in bulk heterojunction organic solar cells

The introduction of functional moieties in the donor polymer (side chains) offers a potential pathway toward selective modification of the nanomorphology of conjugated polymer:fullerene active layer blends applied in bulk heterojunction organic photovoltaics, pursuing morphology control and solar cell stability. For this purpose, two types of poly(3-alkylthiophene) random copolymers, incorporating different amounts (10/30/50%) of ester-functionalized side chains, were efficiently synthesized using the Rieke method. The solar cell performance of the functionalized copolymers was evaluated and compared to the pristine P3HT:PCBM system. It was observed that the physicochemical and opto-electronic characteristics of the polythiophene donor material can be modified to a certain extent via copolymerization without (too much) jeopardizing the OPV efficiency, as far as the functionalized side chains are introduced in a moderate ratio (<30%) and that preference is given to side chains with a small molar volume. A range of complementary techniques – UV–Vis spectroscopy, (modulated temperature) differential scanning calorimetry, transmission electron microscopy and X-ray diffraction analysis – indicated that variations in polymer crystallinity, while maintaining a high level of regioregularity, are probably the main factor responsible for the observed differences.     

Thermal and aqueous stability improvement of graphene oxide enhanced diphenylalanine nanocomposites

Abstract

Nanocomposites of diphenylalanine (FF) and carbon based materials provide an opportunity to overcome drawbacks associated with using FF micro- and nanostructures in nanobiotechnology applications, in particular their poor structural stability in liquid solutions. In this study, FF/graphene oxide (GO) composites were found to self-assemble into layered micro- and nanostructures, which exhibited improved thermal and aqueous stability. Dependent on the FF/GO ratio, the solubility of these structures was reduced to 35.65% after 30 min as compared to 92.4% for pure FF samples. Such functional nanocomposites may extend the use of FF structures to e.g. biosensing, electrochemical, electromechanical or electronic applications.