Coordinated tuning of power system stabilizers in multimachine power systems

In this paper a new approach to simultaneously tuning the power system stabilizer (PSS) settings in a multimachine electric utility system is presented. The approach is based on eigenvalue assignment, which is treated as a problem of solving a set of non-linear equations. The possibility of meeting additional specified performance criteria is discussed. The flexibility of the proposed method is demonstrated using an operating utility system.     

Diagnosis of attention deficit hyperactivity disorder using non‐linear analysis of the EEG signal

Attention deficit hyperactivity disorder (ADHD) is a common behavioural disorder that may be found in 5%–8% of the children. Early diagnosis of ADHD is crucial for treating the disease and reducing its harmful effects on education, employment, relationships, and life quality. On the other hand, non‐linear analysis methods are widely applied in processing the electroencephalogram (EEG) signals. It has been proved that the brain neuronal activity and its related EEG signals have chaotic behaviour. Hence, chaotic indices can be employed to classify the EEG signals. In this study, a new approach is proposed based on the combination of some non‐linear features to distinguish ADHD from normal children. Lyapunov exponent, fractal dimension, correlation dimension and sample, fuzzy and approximate entropies are the non‐linear extracted features. For computing, the chaotic time series of obtained EEG in the brain frontal lobe (FP1, FP2, F3, F4, and Fz) need to be analysed. Experiments on a set of EEG signal obtained from 50 ADHD and 26 normal cases yielded a sensitivity, specificity, and accuracy of 98, 92.31, and 96.05%, respectively. The obtained accuracy provides a significant improvement in comparison to the other similar studies in identifying and classifying children with ADHD.Inspec keywords: feature extraction, time series, fractals, electroencephalography, medical disorders, neurophysiology, medical signal processing, entropy, signal classification, Lyapunov methodsOther keywords: nonlinear extracted features, chaotic time series, identifying classifying children, attention deficit hyperactivity disorder, nonlinear analysis methods, electroencephalogram signals, brain neuronal activity, chaotic behaviour, chaotic indices, EEG signals, nonlinear features, approximate entropies, common behavioural disorder, early diagnosis, life quality, ADHD     

Dynamic properties of calcareous and siliceous sands under isotropic and anisotropic stress conditions

The strain-dependent dynamic properties of sand are generally described by their relative density and mean effective stress, while the contribution of other factors, like soil origin, mineralogy, grain morphology, and initial stress anisotropy, have not been fully recognized. This paper presents the results of an experimental study on the shear modulus and damping ratio of calcareous and siliceous sands of different origins and their identical grain size distribution and stress-density states. Resonant column and cyclic triaxial tests were conducted on reconstituted samples of these two sands obtained from coastal areas. The significance of the initial effective confining pressure and stress anisotropy on the dynamic properties of the sands is evaluated and compared. It is demonstrated that the small-strain shear modulus of the calcareous sand is more affected by an increase in mean effective confining pressure than the siliceous sand. However, the effect of the initial shear on the secant shear modulus of the sands is unique. Based on the test data, a rigorous correction factor is proposed to account for the influence of the initial stress anisotropy on the small-strain shear modulus of the sands. A comparison between the strain-dependent dynamic properties of the calcareous and siliceous sands reveals that the calcareous sand has a higher secant shear modulus, lower damping ratio, and higher linear and volumetric threshold strain. Since the stress-density states and grain size distribution of the two sands were identical in the experiments, the discrepancy in the dynamic properties can be attributed to other factors, including sand origin, grain angularity, mineralogy, and formation processes, which are not commonly taken into account in the current practice.     

Eutectic Morphology in Alloy Pb – 3.2% Cd – 0.08% Sr for Battery Grids

Metal Science and Heat Treatment - Ageing of supersaturated solid solution in Pb – 3.2% Cd – 0.08% Sr alloy is studied at 20 and 80°C by measuring hardness, and light and scanning...     

Radon emanation from radium specific adsorbents

Pilot studies were undertaken to quantify the total activity of radon that is eluted following no-flow periods from several Ra-226 adsorbents loaded to near exhaustion. The adsorbents studied included two types of barium sulphate impregnated alumina (ABA-8000 and F-1) and Dowex MSC-1 resin treated by either barium hydroxide or barium chloride. In parallel, radium loaded plain activated aluminas and Dowex MSC-1 resin were similarly investigated. The results revealed that radon was quantitatively eluted during the first few bed volumes of column operation after no-flow periods. Although similar radon elution profiles were obtained, the position of the radon peak was found to vary and depended on the adsorbent type. Radon levels up to 24 and 14 kBq dm⁻³ were measured after a rest period of 72 h from radium exhausted Dowex MSC-1 treated with barium chloride and F-1 impregnated alumina with barium sulphate, respectively. The eluted radon values measured experimentally were compared to those calculated theoretically from accumulated radium quantities for the different media. For plain adsorbents, an agreement better than 10% was obtained. For treated resin-types a consistency within 30% but for impregnated alumina-types high discrepancy between respective values were obtained.     

Morphological,mechanical, and rheological studies of PVC/ABS blends in the presence of maleic anhydride

A novel method of enhancing compatibility in PVC/ABS blends is the use of ABS‐grafted‐(maleic anhydride) (ABS‐g‐MAH) as a compatibilizer. In this study, maleic anhydride was grafted onto ABS (initiated by peroxide) in an internal mixer. Grafting degree was determined by a back‐titration method, and certain amounts of the resultant ABS‐g‐MAH were added to PVC/ABS blends during their melt blending in the mixer. The weight ratio of PVC to ABS was kept at 70:30. Evaluation of compatibilization was accomplished via tensile and notched Izod impact tests, scanning electron microscopy (SEM), and rheological studies. According to the SEM micrographs, better dispersion of the rubber phase and its finer size in properly compatibilized blends were indications of better compatibility. Besides, in the presence of a proper amount [5 parts per hundred parts of PVC (php)] of ABS‐g‐MAH, PVC/ABS blends showed significantly higher impact strengths than uncompatibilized blends. This result, in turn, would be an indication of better compatibility. In the presence of 5 php of compatibilizer, the higher complex viscosity and storage modulus, as well as a lower loss modulus and loss factor in the range of frequency studied, indicated stronger interfacial adhesion as a result of interaction between maleic anhydride and the PVC‐SAN matrix. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Investigation on the resistance spot-welded austenitic/ferritic stainless steel

In this work, the effect of weld current on joining capability of austenitic stainless steel (AISI 304) and ferritic stainless steel (AISI 430) sheets with application of resistance spot welding process was investigated. Macrostructure, microstructure, microhardness, tensile shear strength, and failure mode of welded materials were evaluated for different weld currents. The values of weld current were 2.5, 3.75, and 5 kA. It was found that when the weld current increased, the nugget size and the weld strength were increased. Two distinct failure modes including interfacial and pullout were observed during tensile shear test. Finally, an adequate weld current was obtained.     

Characteristics of low-level smokers.

Average daily cigarette consumption has decreased, and some evidence suggests that the rate of "some day" smoking has increased; however, relatively little is known about low-level smokers. The present analysis describes and compares low-level versus heavier smokers, using cross-sectional and longitudinal data. Data from the Community Intervention Trial for Smoking Cessation (COMMIT) were used in this analysis. Population-based cross-sectional tobacco use telephone surveys were performed in 22 North American communities in 1988 and 1993, and the prevalence and characteristics of low-level smoking and reasons for quitting are reported from the 1993 prevalence survey. In addition, a cohort of 6,603 smokers was identified in 1988 and interviewed again in 1993 and 2001 to assess patterns of low-level smoking over time and its association with smoking cessation. In 1988, 7.6% were low-level smokers; in 1993, 10.7% were low-level smokers. Compared with heavier smokers, low-level smokers were more likely to be female, older, not married, Black or Hispanic; to have a 4-year college degree; to have no other adult smokers in the household; and to wait longer in the day to have their first cigarette. Low-level smokers also were less likely to report trying to quit because of the expense of smoking or physician advice to quit. They were more likely to try to quit because of trying to set a good example; concern for second-hand smoke; and factors such as bad breath, smell, or the taste of smoking. Those who smoked full-priced premium brands and who worked in a completely smoke-free worksite were more likely to be low-level smokers. Compared with heavier smokers, low-level smokers had similar rates of making a future quit attempt, lower use rates of nicotine replacement therapy, and higher cessation rates. Low-level smokers may be a growing segment of the smoker population and have different characteristics, health risks, and intervention needs compared with their heavier smoking counterparts.     

Weld defect formation in FSWed coppers

This work was undertaken to explore the formation of weld defects in FSWed copper metals via both numerical and experimental approaches. The 4 mm-thick copper sheets were friction stir welded at a tool rotational speed of 710 rpm and tool translational speed of 40 mm/min. Microstructural evaluations were performed on the welded specimens. Also a 3D arbitrary Lagrangian Eulerian numerical model was developed to obtain temperature and material velocity profiles. To this aim, DEFORM-3D was implemented for developing the numerical simulation. Numerical results for temperature values showed good agreement with the recorded experimental data. They also suggest that on the advancing side (AS) of the trailing side, the pin velocity has the minimum amount (zero), and this is the main reason for the formation of tunneling cavity. Experimental results show that a force is created between the reminder of material at the joint and the rim of AS. This force causes a prong of surface material from the AS rim to penetrate into lower parts of weld. It seems that the inadequate pressure (low values of the plunge depth), inadequate surface materials, and the trapped air are the main causes for the formation of the weld defects.