A numerical analysis of heat and mass transfer processes in a macro-patterned methane/steam reforming reactor

The presented paper focuses on a numerical analysis of a heat and mass transfer process in a novel type of methane/steam reforming reactor. The novelty of the macro-patterned reactor design lies in dividing a reformer into segments of various lengths and reactivity. Precisely, splitting the catalyst and filling the created empty volume with porous, non-reactive, thermal conducting material such as metallic foam. This approach allows for moderating a sharp temperature drop at the inlet of the reactor typical for the endothermic methane/steam reforming process. To analyze the considered system, the mathematical and numerical models of transport phenomena and the reaction kinetics were developed and implemented into an in-house solver. The kinetics of methane/steam reforming was taken from the literature. The outlet composition obtained from the kinetic model was compared with the experimental measurements and good agreement was found. The conducted numerical analysis includes cases that differ from a number and lengths of catalytic and non-catalytic segments. The obtained results indicate that the macro-patterned design is a promising strategy that allows for a significant improvement of temperature distribution in a reforming reactor. It was shown that the proposed approach could help to cut the cost of the catalyst material by allowing for the conversion of methane with a smaller amount of the catalyst close to the reference case.     

A multiobjective optimization of a catalyst distribution in a methane/steam reforming reactor using a genetic algorithm

The presented research focuses on an optimization design of a catalyst distribution inside a small-scale methane/steam reforming reactor. A genetic algorithm was used for the multiobjective optimization, which included the search for an optimum of methane conversion rate and a minimum of the difference between highest and lowest temperatures in the reactor. For the sake of computational time, the maximal number of the segment with different catalyst densities was set to be thirty in this study. During the entire optimization process, every part of the reactor could be filled, either with a catalyst material or non-catalytic metallic foam. In both cases, the porosity and pore size was also specified. The impact of the porosity and pore size on the active reaction surface and permeability was incorporated using graph theory and three-dimensional digital material representation. Calculations start with the generation of a random set of possible reactors, each with a different catalyst distribution. The algorithm calls reforming simulation over each of the reactors, and after obtaining concentration and temperature fields, the algorithms calculated fitness function. The properties of the best reactors are combined to generate a new population of solutions. The procedure is repeated, and after meeting the coverage criteria, the optimal catalyst distribution was proposed. The paper is summarized with the optimal catalyst distribution for the given size and working conditions of the system.     

Technically accurate intracavitary insertions improve pelvic control and survival among patients with locally advanced carcinoma of the uterine cervix

The purpose of this study was to document whether the technical qualities of a brachytherapy application impacts on the outcome of patients with locally advanced cervix cancer treated by definitive irradiation. A previous report from the patterns of care study demonstrated the importance of brachytherapy in the treatment of locally advanced cervix cancer. Locally advanced disease was defined as FIGO stages Ib (if tumor diameter was < or = 4 cm), IIb (if disease was bilateral or involved the lateral aspect of either parametrium), and III. Localization films from 128 patients with locally advanced squamous cell carcinoma of the cervix were reviewed by a radiation physicist and a radiation oncologist with expertise in gynecologic radiotherapy. All patients received external beam irradiation followed by one brachytherapy application (median point A dose = 8040 cGy; range, 4083-10,020 cGy). Brachytherapy parameters assessed were (a) the distance between the right colpostat source and the distal tandem source, (b) the distance between the left colpostat source and the distal tandem source, and (c) the symmetry of colpostat placement. Implants were scored as "ideal" (n = 8) when all three parameters were deemed satisfactory, "unacceptable" (n = 17) when none of the parameters was deemed satisfactory, and "adequate" (n = 41) in all other cases. Significantly improved 5-year local control was seen when comparing ideal and adequate placements to unacceptable placements (68% vs 34%, P = 0.02). A strong trend toward improved 5-year survival was also noted among the group with ideal and adequate implants as opposed to unacceptable implants (60% vs 40%). Multivariate analysis showed that the technical adequacy of the brachytherapy implant was the most important prognostic discriminant of local control. In conclusion, these analyses demonstrate the direct influence of competent technical implant performance on tumor control and even survival. While only a small fraction of implants for cervical cancer are performed poorly in the United States, there is a need for continued emphasis of the principles for proper implant technique.     

COMMENTS ON THE HYDRODYNAMICS OF TWO-PHASE DROPS-LIQUID SYSTEMS

Formulae describing the velocity of two-phase drops in relation to the column wall are given. The drops under study cover a range of Reynolds numbers from 7 to 1200. An equation was also derived to determine the frequency of oscillations. Wakes originating behind two-phase drops are described and the relationship between wakes and mass transfer is analyzed     

Automated genomic and proteomic applications on the Biomek NX laboratory automation workstation

This technical paper describes the utilization of a new automated liquid handler from Beckman Coulter, Inc., the Biomek^® NX Laboratory Automation Workstation, for genomic and proteomic applications. For genomic applications, methodology for plasmid DNA purification using Promega Wizard^® SV 96 reagents was developed for the Biomek NX. A single plate of bacterial pellets can be processed to purified plasmid DNA without user interaction after initial setup. DNA quantity and quality were assessed by spectrophotometric analysis, restriction digestion, PCR (The PCR process is covered by patents owned by Roche Molecular Systems, Inc., and F. Hoffman La Roche, Ltd.), and capillary sequencing. Additionally, the plasmid preparation method was used to purify plasmid DNA from bacterial clones isolated in a bacterial two-hybrid screening procedure. In this case, the system quickly and efficiently prepared clones for rapid identification of target sequences. For proteomic applications, His-tag proteins were purified from bacterial cultures in a 96-well plate format. Following purification, a Bradford assay was used to determine the quantitative yields of the His-tag protein products in each of the aliquots from the purified samples. The AD 340 Automated Labware Positioner (ALP), an integrated absorbance reader, was used for absorbance measurements in the Bradford assay. Given the placement of this ALP on the deck of the Biomek NX, the entire process of protein purification and quantitation was performed in a complete walk-away automated format. Results obtained when purifying proteins, from both uninduced and induced bacterial cultures, on the worksurface of the Biomek NX will be described.     

Pharmacokinetic monitoring and dose modification of etanidazole in the RTOG 85-27 phase III head and neck trial

PURPOSE: To prospectively evaluate the pharmacokinetic monitoring and drug dose adjustment of Etanidazole (Eta) in patients treated on the RTOG randomized trial for Stage III and IV head and neck cancer. METHODS AND MATERIALS: From June, 1986 to October, 1991, 521 patients were randomized to conventional RT alone or RT plus Eta. The primary goal was to determine whether the addition of Eta to conventional radiation therapy improves local-regional control and tumor-free survival. Of the 264 patients who received Eta, 233 had their drug exposure calculated and the Eta dose and schedule adjusted accordingly to prevent the occurrence of serious peripheral neuropathy. Drug exposure was assessed using the area under the curve (AUC) for a single treatment that was calculated by the integral over time of the serum concentration of Eta. The total drug exposure (total-AUC) was estimated by multiplying the AUC by the number of drug administrations. RESULTS: Eighteen percent of patients developed Grade I and 6% developed Grade II peripheral neuropathy. There was no Grade 3 or 4 peripheral neuropathy. There is a trend for an increased risk of neuropathy by single dose AUC. The minimal difference in incidence of neuropathy by single-dose AUC was due to the use of dose and schedule modification for patients with the higher values. CONCLUSIONS: The pharmacokinetics investigated in this study confirm previous work that monitoring Eta levels, with dose adjustment, allows it to be used safely in the clinic. In a subset analysis there was a statistically significant improvement in local-regional control and survival rates for patients with N0 and N1 disease, that will require confirmation (14). However, the clinical efficacy of Eta in this trial proved to be of little overall benefit.     

Bench scale treatability of contaminated groundwater at the Ott/Story site - part 1

This is the first of a two-part paper describing experimental studies on the treatability of contaminated groundwater at the Ott/Story site in Muskegon, Michigan. This groundwater is severely contaminated by numerous organic compounds. Activated carbon and resin adsorption, aerobic and anaerobic biological treatment, chemical oxidation, and stripping are being investigated at the bench scale. Most treatment technologies studied to date have been moderately effective in reducing the levels of organic contamination. However, a process train consisting of granular activated carbon adsorption followed by activated sludge treatment can achieve high levels of treatment for short periods of time.     

Enzymatic Synthesis of Halogen Derivatives of Aromatic Amino Acids Labeled with Hydrogen Isotopes

The isotopomers of halogenated amino acids （2＇-F-L-phenylalanine, 3＇-F- and 3＇-Cl-L-tyrosine, as well as 5＇-F-, 5＇-Br-and 6＇-F-L-tryptophan） specifically labeled with deuterium at α- and 13-carbon atom of the side chain were synthesized by enzymatic catalyzed H/D exchange in fully deuteriated incubation medium. The extent and site of deuterium incorporation were confirmed by ^1H NMR （proton nuclear magnetic resonance） spectra.