Production of 2,3-butanediol from diverse saccharides via fermentation

The present study aimed to evaluate the potential use of whey to produce 2,3-BD via the fermentation of lactose and its monosaccharides, glucose and galactose, in a synthetic culture medium (medium 9, M9) using a modified strain of Escherichia coli K12 MG1655 (E. coli JFR12) at a 0.1 L/L (10 vol%) inoculum ratio, 37 °C, atmospheric pressure, an initial pH 7.4, and 100 rpm for 72 h varying the saccharide concentration from 12.5, 25, and 50 g/L. The 2,3-BD yield was ∼80 % of the theoretical yield using 25 g/L of glucose and lactose, corresponding to 0.38 g/g saccharides at a fermentation time of 48 h (glucose) and 72 h (lactose). However, the 2,3-BD yield was halved (0.19 g/g galactose), fermenting 25 g/L of galactose at 48 h. Taking into account these results, two important conclusions were determined: i) E. coli JFR12 could transform galactose into 2,3-BD although its yield was half of the yield observed with glucose at 48 h; and ii) E. coli JFR12 was as efficient as other natural 2,3-BD producers such as Klebsiella species fermenting lactose. However, the E. coli strain has the advantage of being an innocuous strain. To the best of our knowledge, there is no other study presenting the production of 2,3-BD from galactose and lactose with a genetically modified E. coli strain.     

Toward a continuous synthesis of porous carbon xerogel beads

A continuous process for producing porous carbon xerogel beads has been developed. It consists in injecting a pre‐cured aqueous solution of resorcinol and formaldehyde on top of a column filled with hot oleic acid. The latter is pumped on the top of the column and fed at the bottom, generating an upward flow that can be adjusted to match the terminal velocity of the settling beads. Thus, the bead residence time in the column can be adjusted to match the gelation time, allowing the beads to solidify before reaching the bottom of the vessel. The obtained beads are subsequently dried and pyrolyzed. The developed experimental setup proved the continuous synthesis of porous carbon beads is possible. Nevertheless, the shaping process caused various texture changes of the porous carbon, which mainly yields macropores instead of micro and mesopores. This process also leads to the build‐up of a denser skin around the beads. © 2018 American Institute of Chemical Engineers AIChE J, 64: 1049–1058, 2018     

Repeated thermo-hydrolytic disintegration of medium density fibreboards (MDF) for the production of new MDF

European Journal of Wood and Wood Products - Medium density fibreboards (MDF) are currently not recycled after service life, but various publications report on recycling by the disintegration of...     

New Results on Reachable Sets Bounding for Switched Neural Networks Systems with Discrete,Distributed Delays and Bounded Disturbances

Neural Processing Letters - In this paper, problem of reachable sets bounding is considered for switched neural networks systems with mixed time-varying delays and bounded disturbances. By using...     

CIGI2011: A heuristic method for resource-constrained project scheduling with activity overlapping

The overlapping of activities is a common practice to accelerate the execution of engineering projects. This technique consists in executing in parallel two activities, normally executed in a sequential way, by allowing the downstream activity to start before the end of the upstream activity based on preliminary information. In this paper, we propose a constructive heuristic for the resource-constrained project scheduling problem with overlapping modes (RCPSP-OM). Given a set of activities to execute, the RCPSP-OM consists in determining the order of execution in time of a set of activities so as to minimize the total project duration, while respecting precedence relations, resource constraints and overlapping possibilities. The heuristic implies that rework tasks related to overlapping are added to downstream activities and that the consumption of the resources is constant throughout the execution of the project (including rework). The method also considers that the possible overlapping modes for every couple of activities and the duration of rework tasks associated with every mode are known in advance. Results show that, when the objective consists in minimizing the project duration, the consideration of the costs associated to activity overlapping allows to significantly reducing the cost of reworks. On the other hand, when the objective consists in maximizing the gains related to the project execution, the search for the best trade-off between acceleration and increase of project costs enables to avoid losses.     

Individual and area socioeconomic inequalities in cause-specific unintentional injury mortality: 11-Year follow-up study of 2.7 million Canadians

This study investigated the association between individual and area socioeconomic status (SES) and leading causes of unintentional injury mortality in Canadian adults. Using the 1991–2001 Canadian Census Mortality Follow-up Study cohort (N = 2,735,152), Cox proportional hazard regression was used to calculate hazard ratios and 95% confidence intervals for all-cause unintentional injury, motor vehicle collision (MVC), fall, poisoning, suffocation, fire/burn, and drowning deaths. Results indicated that associations with SES differed by cause of injury, and were generally more pronounced for males. Low education was associated with an elevated risk of mortality from all-cause unintentional injury and MVC (males only) and poisoning and drowning (both sexes). Low income was strongly associated with most causes of injury mortality, particularly fire/burn and poisoning. Having no occupation or low occupational status was associated with higher risks of all-cause injury, fall, poisoning and suffocation (both sexes) and MVC deaths among men. Associations with area deprivation were weak, and only areas with high deprivation had elevated risk of all-cause injury, MVC (males only), poisoning and drowning (both sexes). This study reveals the importance of examining SES differentials by cause of death from a multilevel perspective. Future research is needed to clarify the mechanisms underlying these differences to implement equity-oriented approaches for reducing differential exposures, vulnerability or consequences of injury mortality.     

Highly active Pt decorated Pd/C nanocatalysts for oxygen reduction reaction

This article describes findings of the correlation between the atomic scale surface structure and the electrocatalytic performance of nanoengineered Pt-Pd/C catalysts for oxygen reduction reaction (ORR), aiming at providing a new fundamental insight into the role of the detailed atomic decorated structure of the catalysts in fuel cell reactions. Carbon-supported Pt decorated Pd nanoparticles (donated as Pt-Pd/C), with Pt coverage close to a monolayer, were prepared from a simple galvanic replacement reaction between Pd/C particles and PtCl₄^2? at room temperature. The decorated architecture was confirmed by extensive microstructural characterization techniques, including TEM, XRD, XPS, HAADF-STEM, ICP and HS-LEIS. The catalysts were also examined for their intrinsic kinetic activities towards oxygen reduction reaction. The results have shown that the Pt-Pd/C catalysts are highly active towards molecular oxygen electrocatalytic reduction. These findings have profound implications to the design and nanoengineering of decorated surfaces of catalysts for oxygen reduction reaction.     

Gut Microbial Metabolites of Polyunsaturated Fatty Acids Correlate with Specific Fecal Bacteria and Serum Markers of Metabolic Syndrome in Obese Women

The aim of this human study was to assess the influence of prebiotic-induced gut microbiota modulation on PUFA-derived bacterial metabolites production. Therefore, we analyzed the circulating fatty acid profile including CLA/CLnA in obese women treated during 3 months with inulin-type fructan prebiotics. In these patients, we had already determined gut microbiota composition by phylogenetic microarray and qPCR analysis of 16S rDNA. Some PUFA-derived bacterial metabolites were detected in the serum of obese patients. Despite the prebiotic-induced modulation of gut microbiota, including changes in CLA/CLnA-producing bacteria, the treatment did not impact significantly on the circulating level of these metabolites. However, some PUFA-derived bacterial metabolites were positively correlated with specific fecal bacteria (Bifidobacterium spp., Eubacterium ventriosum and Lactobacillus spp.) and inversely correlated with serum cholesterol (total, LDL, HDL). These correlations suggest a potential beneficial effect of some of these metabolites but this remains to be confirmed by further investigation.     

纳米结构镁的制备及其储氢性的研究进展

氢能的利用越来越受到人们的重视,而氢的储存和运输限制了其广泛的实际应用。镁基合金作为一种固体储氢材料,在储氢领域显示出巨大的潜力。但是,吸放氢温度高,释氢速率慢,阻碍了其工程应用。为了提高镁基合金的储氢能力,目前的研究主要集中在合金成分的优化和加工工艺的改进方面,而纳米细化是最有前途的方法之一。详细介绍了纳米镁的各种制备工艺,包括高能球磨、物理气相沉积、氢化化学气相沉积、液相化学合成和模板法,并分析了各种方法的优缺点。阐述了纳米结构和元素掺杂对镁基合金储氢性能的影响。本研究为储氢领域的材料开发和制备工艺的改进提供参考。