H型丝光沸石催化剂催化甲苯与叔丁醇的烷基化反应

针对合成对叔丁基甲苯传统工艺中存在的缺点,采用环境友好、可重复利用的H型丝光沸石催化剂(以下简称催化剂)进行了甲苯与叔丁醇的烷基化反应,并用X射线衍射和氨程序升温脱附等方法对不同焙烧温度下得到的催化剂的物相结构和酸性质进行了表征,研究了各种反应条件对催化剂的催化性能的影响。实验结果发现,在适宜的操作条件下,即催化剂的焙烧温度823K、反应温度180℃、反应时间3h、初始压力1.0MPa、原料与催化剂的质量比为8、叔丁醇与甲苯的摩尔比为4、溶剂环己烷与甲苯的摩尔比为5时,甲苯转化率达42.73%,叔丁基甲苯的选择性为96.30%,对叔丁基甲苯的选择性为80.37%。     

微机械热对流倾角仪温度补偿技术研究

介绍了微机械热对流倾角仪的工作原理和结构设计,利用有限元分析软件,计算了在不同倾斜状态下二维密闭腔中点热源引起的对流场和温度场,提出了环境温度对热对流倾角仪影响的模型。根据仿真结果,在电路中增加了加热丝恒定温度控制电路,建立了基于软件的环境温度补偿算法,实现了对温度影响的补偿。经测试,环境温度从-40℃变化到60℃时,倾角仪0°输入的温度稳定性为0.07°,10°输入的温度稳定性为0.02°。     

基于USB总线的虚拟频谱分析仪设计

文章详细介绍了基于USB总线的虚拟频谱分析仪的设计过程。该仪器使用嵌入式混合处理器MC56F8323来实现动态信号的实时采集、频谱分析和数字滤波等功能。处理结果由USB2．0接口芯片CY7C68013上传至PC机．以完成数据显示、存储、绘制图形等功能。其中，CY7C68013工作于Slave FIFO模式，以实现与MC56F8323间的数据传输。该系统可同时对两路动态信号进行实时谱分析，每路采样频率高选500kHz。     

Dealumination–aging pattern of REUSY zeolites contained in fluid cracking catalysts

The evolution of the properties of a REUSY zeolite contained in a fluid cracking catalyst was investigated under laboratory steam deactivation procedures and in age fractions of the corresponding equilibrium catalyst (Ecat). The aging pattern, defined by the evolution of the zeolite surface area (ZSA) related to the decrease of the unit cell size (UCS), was similar between lab-steamed zeolites and Ecat fractions. A sharp drop in ZSA occurred at ca. 2.430 nm UCS. A study done by FT-IR spectroscopy suggested that zeolite dealumination initially took place more extensively on the sodalite cages and double six-member rings (D6R) of the structure and that the final collapse of the zeolite framework occurred through destruction of the 12-member rings (12M). This can be explained by a crystal fracture and break down process and disassembling of the sodalite cages in the faujasite structure. NH₃ microcalorimetry showed that strong acid sites in faujasites are destroyed by steam aging, but this effect does not lead to a reduction in the cracking activity of the Ecat form. The microactivity test (MAT) showed that the specific activity declined sharply at 2.430 nm UCS. Differences in product selectivity were related to the extent of damage of the zeolite, extra-framework alumina and mesoporosity. While further aging canceled the effect attributed to extra-framework alumina differences attributed to mesoporosity increased.     

高功率横流CO2激光熔池形成过程检测研究

检测激光熔池信息,研究其分布情况,对于控制激光熔池形貌,改进工艺设计,提高激光加工质量,具有重要意义.研制了一套激光熔池动态检测系统,实时检测了高功率横流CO2激光熔池的形成过程,并给出了其温度场分布情况.实验结果表明,刚开始形成的激光熔池由几个分熔池组成,经过一段时间后,形成一个完整的熔池.可通过调整能量密度较高的分光斑覆盖整个加工轨迹截面,优化加工速度和激光功率等参数,提高激光加工质量均匀性.     

东江干流河道来沙量变化分析及泥沙沉积量计算

在对东江干流来水来沙的特性以及东江干流河道梯级枢纽建成前后河道的水沙变化进行分析的基础上,进行了东江干流河道泥沙沉积量的分析计算,为东江干流河道采砂控制规划提供科学依据。     

Interaction of triton X-100 on silica: A relationship between surface characteristics and adsorption isotherms

Adsorption of Triton X-100 on various silica substrates has been investigated. A number of solids, including a natural quartz, this quartz washed with HCl acid and subsequently heated at 1273 K; two aerosils and one Kieselgel silicas were studied. These solids exhibit surface areas in the range of 5 to 430 m² g^?1. All the Triton adsorption isotherms display an S-shape at the adsorption temperatures studied (298 and 308 K). It has been found that the pretreatments of natural quartz (by water washing, impurities removed by acid and/or high temperature calcination) affect considerably the amounts of TX-100 adsorbed. Measurements of surface composition have been made by X-ray photoelectron spectroscopy (XPS) with particular emphasis on the presence of impurities and on the number of OH groups at the surface of the samples. The nature of the surface hydroxyl has also been studied by infrared spectroscopy. Furthermore, the specific number of hydroxyl groups on the surface of the silica samples has been determined by thermogravimetric analysis. Finally an attempt to correlate solid surface characteristics with adsorption isotherms has been developed.     

对分布式数据库发展方向的分析

本文对分布式数据库的设计方法、分割与分配技术作了一些探讨，并就分布式数据库的发展方向进行了初步分析。     

Head and eye movements in unrestrained pigeons (Columba livia).

Head and eye movements were simultaneously recorded during locomotory and pecking behavior of 4 pigeons, which were trained to traverse a conditioning chamber, with a pecking key and a food dispenser at each end. Each trial involved key pecking, walking, and feeding. Head movements were registered with a skull-mounted miniature accelerometer, and eye movements were recorded with implanted electrooculogram (EOG) electrodes. An almost perfect temporal coordination between head and eye movements was observed during both walking and feeding bouts. During walking, head movements primarily provide retinal image stability, and eye movements support visual scanning. During feeding, head movements mainly subserve the grasping of food items, and eye movements maintain visual fixation on them. Because the eyes are reflexively closed during the middle phase of pecks, the head and eye movements are then under ballistic control. (PsycINFO Database Record (c) 2010 APA, all rights reserved)