Comparison of different methods to prepare MgO whiskers

Magnesia whiskers have been made by hydrolysis of MgCl₂–KCl melt and conversion of magnesium hydroxide whiskers. The morphology of MgO whiskers was examined by SEM and TEM. Composition of products was identified by XRD. Comparisons have been made on the morphology and quality of the products by different methods. Discussions have been made on the efficiency, product quality control and scale-up feasibility of these methods. Whiskers prepared by hydrolysis have uniform diameter but other shapes of magnesia are often found. Conversion of Mg(OH)₂ whiskers to MgO whiskers is simple and easy to scale-up, but the product often has many defects caused by decomposition. Nevertheless, the single crystal structure can be reserved as revealed by electron diffraction. XRD results show that the purity of products by hydrolysis is better than that by conversion. The conversion method is more hopeful for industrial production.     

硫酸钙氨法制取硫酸钾新工艺的实验研究

利用K2 +2 ,Ca2 +/ /SO2 -4 ,Cl2 -2 ,NH3—H2 O混合体系相图作为工艺指导 ,进行硫酸钙制取硫酸钾工艺的相图研究和分析 ,确定实验优选因素及水平并进行正交实验 ,根据实验结果进行极差分析 ,得出新的结论。合适的工艺条件为 :氨浓度为 40 % ,配料比n( 2KCl) :n(CaSO4 ·2H2 O)为 1:1,反应温度为 5℃ ,反应时间为 1h。     

Real-time measurement of pointing action by using DSP

This paper presents an approach of measuring in real-time the vector of finger that is pointing to an object. DSP is used in the operation processing unit in order to do the real-time processing. The steps include the extraction of flesh-colored regions from an image, the labeling of the flesh-colored regions, and the detection of two characteristic positions on the finger so that the direction that the finger is pointing at will be calculated. The entire process takes about 29 msec, which makes it possible to have the frame rate of 34 fps. With this frame rate, this measurement approach is considered real-time and promising to be merged into other application systems. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Employing optimized combinations of one-class classifiers for automated currency validation

Automated currency validation requires a decision to be made regarding the authenticity of a banknote presented to the validation system. This decision often has to be made with little or no information regarding the characteristics of possible counterfeits as is the case for issues of new currency. A method for automated currency validation is presented which segments the whole banknote into different regions, builds individual classifiers on each region and then combines a small subset of the region specific classifiers to provide an overall decision. The segmentation and combination of region specific classifiers to provide optimized false positive and false negative rates is achieved by employing a genetic algorithm. Experiments based on high value notes of Sterling currency were carried out to assess the effectiveness of the proposed solution.     

计算机高速并行通信的实现方案

利用CPLD芯片实现单片机与ISA总线接口之间的高速并行通信，给出系统的总体设计方法及程序框图。采用这种通信方式，在12MHz晶振的MCS51单片机控制的数据采集系统中，可以满足与PCI04 ISA总线接口实时通信的要求，通信速率达200khit／s。在开发工具MAX plusⅡ下，完成了整个设计的输入、编译和仿真，达到了预期效果。本设计方案能够推广应用到计算机的高速并行通信中。     

基于EP7312 LCD控制器的16级灰度实现

液晶显示器(LCD)的发展使人们对视觉显示的要求越来越高,彩色屏的可显颜色丰富程度和单色屏的灰度等级越多,视觉效果越好.想要达到好的视觉效果,除了LCD屏本身的指标要求外,还应有与之相匹配的LCD控制器.据此,文中讨论了基于EP7312微处理器的LCD控制器的8位并行超扭曲向列(STN)彩色LCD模块Optrex DMF50944和4位并行单色LCD模块Sharp LM32019T的16级灰度实现问题,并介绍了实现16级灰度的原理和实现方法.最后给出了该LCD控制器与8位并行STN彩色LCD模块的硬件接口、程序设计方案及流程.     

WCDMA功率控制技术的研究与实现

介绍了功率控制技术的作用和分类,以及宽带码分多址(WCDMA)系统反向闭环功率控制的技术标准和组成部分,分析得出了WCDMA系统反向功率控制实现的定时限制条件.讨论了影响功率控制技术性能的几个关键因素:信扰比(SIR)估计精度、步长选择、功控比特传输错误及功控时延等,并给出了仿真曲线和结果分析.最后给出了WCDMA系统前、反向功率控制技术基于FPGA的实现结构框图和测试结果.     

中兴宽带线路测试技术及功能介绍

宽带线路测试是中兴通讯ZXDSL综合宽带运维系统的核心功能，在DSL业务提供过程中主要应用在开通前的预测试、线路测试、开通后的例测试以及故障时的在线测试。对其测试技术和功能作了介绍。     

关于海面无线传播模型的探讨

现有文献中一般都认为海面环境的无线传播模型近似于自由空间传播模型，但在实际测试中发现，自由空间模型预测值与实测值差别较大，不能很好地解释此类环境的信号传播。笔者根据多次海面覆盖测试的数据，分析并拟合出了新的海面传播模型。