Preparation and properties of Ce0.8Ca0.2O1.8 anode material by glycine-nitrate process

Ce0.8Ca0.2O1.8（CDC82） anode material was prepared by glycine-nitrate process（GNP）. Thermogravimetric（TG） analysis and differential scanning calorimetric（DSC） methods were adopted to characterize the reaction process of CDC82 material. X-ray diffractometry（XRD）, scanning electron microcopy（SEM）, direct current four probe （four-probe DC） and temperature process reduce（TPR） techniques were adopted to characterize the properties of CDC82 material. After the precursor was sintered at 750℃ for 4 h, CDC82 material with pure-fluorite structure and nanometer size was obtained. The total conductivity of CDC82 changes little with temperature in air at 50-850℃, and the maximum value is 0.04 S/cm at 750 ℃. The total conductivity wholly becomes larger when the atmosphere changes from air to hydrogen, which greatly increases with increasing temperature and reaches the maximum value of 1.09 S/cm at 850 ℃. Some impurities such as CeMg and La203 exist after the mixture of CDC82 anode and La1-xSrxGa1-yMgyO3-δ （LSGM） electrolyte material is sintered at 1 200 ℃ for 15 h. The CDC82 material as anode material has excellent catalytic property for hydrogen and methane.     

中国镁工业研究方向探讨

简单介绍了我国镁资源状况以及我国镁工业的发展历程和现状,分析了我国现有镁工业中存在的一些问题。在当前许多传统金属资源已面临枯竭之际,强调了加速发展镁工业的必要性。文章从镁冶炼工艺的研究和镁合金成形技术的研究两个方面对中国镁工业今后的研究方向进行了探讨,并指出真空碳热还原法炼镁等新工艺的开发研究和镁合金机械成形、超塑性成形、触变成形和流变成形等技术的开发研究是促进中国镁工业发展的关键。最后对中国的镁工业作了展望。     

PEMSIP法沉积的TiN涂层对刀具切削性能的影响

基片负偏压增加，使等离子体增强磁控溅射离子镀TiN涂层的相组成朝着富氨相及其含量增加的方向发展，由Ti2N和TiK两相组成的涂层硬度最高，可达Hk2460。切削力测定表明，由Ti2N和TiN两相组成的刀具涂层使切削力略有下降。涂层能明显提高刀具耐用度。     

TiN涂层电化学腐蚀行为研究——Ⅱ．添加A1对TiN涂层保护性能与失效机制的影响

利用电化学方法以及扫描电镜(SEM)、扫描隧道显微镜(STM)技术等，研究了添加A1对离子镀TiN薄膜涂层在0．5mol/L NaCl和1mol/L H2SO4溶液中的保护性能和失效机制的影响，发现铝的添加使TiN涂层在中性和酸性溶液中的耐蚀性能明显改善．A1元素对TiN涂层具有自修复作用．     

Morphology, structure and formation mechanism of silicide coating by pack cementation process

The MoSi2 coating on C 103 niobium based alloy was prepared by pack cementation method. The formative mechanism, morphology and structure of coating were investigated. The silicide coating was formed by reactive diffusion obeying parabolic rule during pack cementation process. It is found that the composite structural coating is composed of three inferior layers as follows. The main layer is composed of MoSi2, the two phases＇ transitional layer consists of NbSi2 and a few NbsSi3 and the diffuse layer is composed of NbsSi3. The dense amorphous glass layer formed on the surface at high temperature oxidation circumstance can effectively prevent the diffusion of oxygen into coating.     

薄壁钢管切割夹具设计

针对薄壁钢管加工过程中存在的装夹效率低、加工精度差等问题,设计一种从钢管内部夹紧、加工范围大、一次装夹可实现多次多段切割的新型夹具,分析夹具整体结构特点和受力情况,对于提高钢管切割效率、保证切割精度、优化工艺过程起到了积极作用。     

矫直辊曲线及调整角度计算程序

简述了矫直辊辊形曲线计算原理，并作了定性分析；根据解析法与椭圆法归纳出辊形曲线程序设计的数学模型联；计算出了各种钢管对应的矫直辊调整角度。     

别让整文翻译驴唇不对马嘴

谷歌先前的整文翻译功能并不好,经常会出现驴唇不对马嘴的现象。不过,它最近推出了一个翻译辅助系统,可以极大地改善这种状况。该服务除提供了自动翻译结果外,还提供了他人翻译结果供你参考。同时还可利用它提供的双语字典等功能,对翻译结果进行修改及完善。     

基于ＦＰＧＡ的高精度多通道信号源设计与实现

针对航天领域遥测系统设备地面测试阶段需要模拟多种信号,以完成地面模拟试验,设计了一种基于FPGA和千兆以太网的高精度多通道模拟信号源。该信号源以FPGA作为系统的核心控制器,通过千兆以太网接收上位机传输的指令来控制信号的输出,实现了65路0~5V、10路0~28V、8路-15~0V可调直流模拟电压输出、2路TTE网口信号输出和16路RS422数字信号输出。该信号源结构设计简单合理,配套上位机能够对直流电压信号进行幅值设定和精度补偿,能够达到输出幅值精度优于0.01％,同时能够配置数字信号的帧格式和数据内容,能够兼容HDLC、PCM等多种数字协议。试验表明,系统能够实现所需信号的高精度可靠输出,并且具备极高的兼容性,目前,该信号源已经成功应用于某数据采编存储器的地面联试实验。