Growth of Potassium Titanate Fibers in Flowing N2 Gas

The length of potassium titanate fibers produced by several conventional methods averages 50 μm, with a maximum of 100 μm. Extremely long fibers (most >1000 μm long) were obtained by calcination in N₂ gas flowing at 5.2×10^-4 m/s.     

Hydrothermal corrosion of magnesiapartially-stabilized zirconia

Changes in the phase compositions and microstructures of magnesia-partially-stabilized zirconia (Mg-PSZ) were studied in water at 80–300 °C, 1 m HCl solutions at 80–140 °C and 1 m CH₃COOH-CH₃COONa buffer solutions at pH 3 and 80–140 °C for 10–40 days. The tetragonal to monoclinic phase transformation and the degradation of the fracture strength occurred in water above 200 °C. On the other hand, although no noticeable tetragonal to monoclinic phase transformation proceeded in 1 m HCl solutions and 1 m CH₃COOH-CH₃-COONa buffer solutions at pH 3 below 140 °C, the fracture strength of Mg-PSZ greatly degraded. The dissolution of Mg²⁺ ion was observed in water above 200 °C and in 1 m HCl solutions above 80 °C.     

Improved direct bonding method of Nd:YVO4 and YVO4 laser crystals

We succeeded in the fabrication of bonded laser crystals composed of a neodymium-doped YVO₄ laser crystal (Nd:YVO₄) and its host crystals YVO₄ by a newly developed dry etching technique using an argon ion beam. The optical distortion caused by the bonded interface of size 5 mm × 6 mm was estimated to be 0.05λ at 633 nm. From the comparison of laser performance pumped by a laser diode, the bonded crystals could increase the laser output power by nearly twice that of the non-bonded crystals with the same degree of polarization of 99.2%. To analyze the mechanism of the enhanced reduction of the thermal load in the bonded crystals, numerical simulations with a finite-element method were also performed.     

Application of gene gun for local-regional cancer

We studied the in vivo gene transfusion using a gene gun, formerly used in plants and culture cells. The hand-held type gene gun (Helios Gene Gun System) is simple and convenient for effective gene transfection in living animals. This method has some advantages in that there is no need for use of viral vector, independence on the cell cycle and local inducement of plural genes. There is a great possibility for application to local-regional cancer.     

Voltage-time characteristics for steep-front impulse voltages ofparticle-contaminated spacers in SF6 gas-insulated switchgear

The voltage-time characteristics of spacer surfaces for steep-front impulse waves are investigated under a particle-contaminated condition in SF₆ gas. The characteristics are measured as a function of particle length, particle position, and space shapes. Flashover voltages monotonically increase in the submicrosecond region as time to flashover is shorter, and are a minimum in the 1 μs region. Applicability of the equal voltage-time area criterion for estimating the voltage-time characteristics is discussed and the estimation is clarified. Moreover, it is demonstrated that an optimized spacer with ribs greatly improves flashover voltages in the submicrosecond region as well as in the 1 μs and power frequency region     

Involvement of brain serotonergic function in lidocaine-induced convulsions in mice

Influences of drug-induced manipulations of central serotonergic function on lidocaine- and pentylenetetrazol (PTZ)-induced convulsions were examined in mice. Agents that suppressed serotonergic transmission increased, whereas drugs that facilitated serotonin (5-HT) function decreased the incidence of lidocaine-induced convulsions. These treatments had similar influences on the incidence of PTZ-induced convulsions. Lidocaine (10(-5)-10(-3) M) reduced the stimulation evoked [3H]5-HT release from cortical slices, followed with an increased spontaneous [3H] overflow at higher concentrations. These results may suggest that brain 5-HT neurons are causally involved as inhibitory neurons in lidocaine-induced convulsions as in the case of PTZ-induced convulsions.     

Circulating platelet-derived endothelial cell growth factor increases in hepatocellular carcinoma patients

BACKGROUND: Platelet-derived endothelial cell growth factor (PD-ECGF) is an angiogenic factor that is expressed in various cancer tissues. Little is known regarding plasma PD-ECGF levels in patients with chronic liver disease such as chronic hepatitis (CH), cirrhosis, and hepatocellular carcinoma (HCC) with cirrhosis. The expression of PD-ECGF in HCC tissues also remains to be clarified. METHODS: Plasma PD-ECGF levels in patients with chronic liver disease were determined with an enzyme-linked immunoadsorbent assay system using the mouse monoclonal antibodies specific to PD-ECGF. These were cross-sectionally compared among groups of normal persons, CH, cirrhosis, and HCC patients. The HCC patients were classified into two groups based on TNM stage: early and advanced stage disease groups. PD-ECGF expressions in HCC tissues were immunohistologically examined. RESULTS: The plasma PD-ECGF levels from the normal individuals and those with CH, cirrhosis, and HCC specimens were 4.2+/-0.5, 4.3+/-0.6, 4.6+/-1.1, and 6.0 +/-2.5 U/mL, respectively. The plasma PD-ECGF concentration was highest in HCC (P < 0.05). No significant difference was found among the normal subjects, CH, and cirrhosis specimens. Plasma PD-ECGF concentrations were significantly higher in the advanced stage disease HCC group compared with the early stage disease group (6.75+/-2.62 U/mL vs. 4.19+/-0.34 U/mL) (P < 0.05). Immunohistochemical expression of PD-ECGF in HCC cells increased significantly compared with normal liver cells (P < 0.05). CONCLUSIONS: Circulating PD-ECGF plasma level might be a new tumor marker for progression in patients with HCC. Immunohistological findings correspond to elevation of the plasma PD-ECGF in HCC patients. It is possible that increased production of PD-ECGF in HCC cells causes abundant neovascularization.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Novel anion exchange membranes having fluorocarbon backbone: Preparation and stability

Anion exchange membranes with excellent durability were prepared by chemical modification of Nafion. The modification was achieved by transformation of the sulfonic acid group into quaternary ammonium group. Namely, Nafion membrane was first converted into an amide-type membrane. Reduction of the carbonxyl group to methylene followed by quaternarization with alkyl iodide resulted in the formation of an anion exchange membrane. The electric resistance of the resulting membranes depends on the equivalent weight of the starting membranes (4.4–6.0 Ω cm² in 0.5N NaCl). The characteristics of the membranes are the excellent stability toward chemical substances such as organic solvents, oxidizing agents, acids, etc. For example, the membranes are stable in aqueous saturated chlorine solution at 60°C for 1000 hr.