The relationship between the a.c. impedance and microstructure of a sodium β-alumina ceramic

A comparison is made between the microstructures, resistivities and strengths of sodium /-alumina samples prepared under different firing conditions. Double peak firing schedules are shown to result in samples of higher strength with a narrower grain-size distribution and lower resistivity than those produced by single peak firing. Complex plane a.c. impedance and admittance data show the sodium ion conduction over the temperature range 173 to 300 K to be governed primarily by intergranular regions of the sample (with the resistance varying with grain size) whilst resistivity measurements at 623 K show the conduction to be primarily intragranular controlled at elevated temperatures.     

Comparison of Oxidation Behavior and Electrical Properties of Doped NiO- and Cr2O3-Forming Alloys for Solid-Oxide, Fuel-Cell Metallic Interconnects

The goal of this paper was to determine if NiO-forming alloys are a viable alternative to Cr₂O₃-forming alloys for solid-oxide fuel-cell (SOFC) metallic interconnects. The oxide-scale growth kinetics and electrical properties of a series of Li- and Y₂O₃-alloyed, NiO-forming Ni-base alloys and La-, Mn-, and Ti-alloyed Fe–18Cr–9W and Fe–25Cr base ferritic Cr₂O₃-forming alloys were evaluated. The addition of Y₂O₃ and Li reduced the NiO scale growth rate and increased its electrical conductivity. The area-specific-resistance (ASR) values were comparable to those of the best (lowest ASR) ferritic alloys examined. Oxidation of the ferritic alloys at 800°C in air and air+10% H₂O (water vapor) indicated that Mn additions resulted in faster oxidation kinetics/thicker oxide scales, but also lower oxide scale ASRs. Relative in-cell performance in model SOFC stacks operated at 850°C indicated a 60–80% reduction in ASR by Ni+Y₂O₃, Ni+Y₂O₃, Li, and Fe–25Cr+La,Mn,Ti interconnects over those made from a baseline, commercial Cr₂O₃-forming alloy. Collectively, these results indicate that NiO-forming alloys show potential for use as metallic interconnects.     

Simultaneous fixation using glutaraldehyde and osmium tetroxide or potassium ferricyanide-reduced osmium for the preservation of monogenean flatworms: an assessment for Merizocotyle icopae

Simultaneous fixation was investigated for a marine organism: the monogenean flatworm ectoparasite Merizocotyle icopae. Four protocols for primary fixation were compared: 3% glutaraldehyde alone in 0.1M cacodylate buffer for a minimum of 2 hours; 1% glutaraldehyde in combination with 1% osmium tetroxide, both in 0.1M cacodylate buffer, until tissues darkened (5-20 minutes); 1% glutaraldehyde in 0.1M cacodylate buffer in combination with 0.5% potassium ferricyanide-reduced osmium until tissues darkened (5-20 minutes); 1% glutaraldehyde in combination with 1% osmium tetroxide, both in 0.1M cacodylate buffer, for 30 minutes. The study confirms that the standard method for transmission electron microscopic fixation (first listed protocol) routinely applied to platyhelminths is optimal for ultrastructural preservation, but some simultaneous fixation methods (second and third listed protocols) are acceptable when rapid immobilization is needed. Scanning electron microscopic preparations may be improved using simultaneous primary fixation.     

The bleaching of soybean oil. A spectrophotometric evaluation

Summary Bleaching results are evaluated spectrophotometrically by measuring the change in the absorbances at 455 and 670 (or 665) millimicrons, respectively. Three bleaching clays (one was activated) and two activated carbons were used for decolorizing soybean oils made break-free by either alkali refining or acetic anhydride water degumming. Bleaching times varied from 10 to 40 min. with 30 min. being used in the evaluations. Although bleaching at a temperature of 265°F. removed more color than bleaching at 125° or 220°F., the latter temperature was used in this study. Most of the bleaching was done under vacuum although using a nitrogen pressure of 50 p.s.i.g. removed more color. Results are expressed by Freundlich isotherms, and a bleaching chart for the control of plant bleaching is given. It is shown that in the bleaching of soybean oil primary consideration should be given to the removal of green pigment. Now with E. I. du Pont de Nemours Company Inc., Kinston, N. C.     

Median and ulnar nerve conduction studies among workers: normative values

To determine normative values for nerve conduction studies among workers, we selected a subset of 326 workers from 955 subjects who participated in medical surveys in the workplace. The reference cohort was composed exclusively of active workers, in contrast to the typical convenience samples. Nerve conduction measures included bilateral median and ulnar sensory amplitude and latency (onset and peak). Workers with upper extremity symptoms, medical conditions that could adversely affect peripheral nerve function, low hand temperature, or highly repetitive jobs were excluded from the "normal" cohort. Linear regression models explained between 21% and 51% of the variance in nerve function, with covariates of age, sex, hand temperature, and anthropometric factors. The most robust models were fitted for sensory amplitudes in the median and ulnar nerves for dominant and nondominant hands. The median-ulnar difference was least sensitive to adjustment, indicating it is the best measure to use if corrections are not made to account for relevant covariates. A key point was that the magnitude of variance increased with age and anthropometric factors. These findings provide strong evidence that to improve diagnostic accuracy, electrodiagnostic testing should control for relevant covariates, particularly age, sex, hand temperature, and anthropometric factors.     

Potential impact of evidence-based medicine in acute coronary syndromes: insights from GUSTO-IIb. Global Use of Strategies to Open Occluded Arteries in Acute Coronary Syndromes trial

OBJECTIVES: The purpose of this study to determine whether use of cardiac medications reflects evidence-based recommendations for patients with non-ST elevation acute coronary syndromes. BACKGROUND: Agency for Health Care Policy and Research practice guidelines for unstable angina recommend the use of cardiac medications based on evidence from randomized trials. It is unknown whether practitioners in the U.S., Canada and Europe follow these recommendations in patients with non-ST elevation acute coronary syndromes. METHODS: We studied 7,743 patients with non-ST elevation acute coronary syndromes enrolled in the international Global Use of Strategies to Open Occluded Arteries in Acute Coronary Syndromes trial. The use of aspirin, beta-adrenergic blocking agents, angiotensin-converting enzyme inhibitors and calcium channel blocking agents was determined at discharge for all patients and "ideal" patients (those with indications and no contraindications). Using published estimates of relative mortality reductions with these drugs, we calculated the lives that could have been saved at 1 year if discharge medication use had better matched guideline recommendations. RESULTS: Overall, guideline adherence at discharge in "ideal" patients was 85.6% for aspirin, 59.1% for beta-blockers and 51.7% for angiotensin-converting enzyme inhibitors. Calcium channel blockers were given to 26.7% of patients with a contraindication to these drugs. These rates were similar across locations of enrollment. Women and older patients less often received aspirin when "ideal," and younger patients more often received calcium channel blockers when they were contraindicated. If medication use had been more evidence-based, 1-year mortality might have been reduced by a relative 22%. CONCLUSIONS: There is significant room for improvement in the use of recommended drugs in patients with non-ST elevation acute coronary syndromes. Medication use that more closely follows recommendations could reduce mortality in this population.     

Fast-scan cyclic voltammetry of protein films on pyrolytic graphite edge electrodes: characteristics of electron exchange

The rapid electron-exchange characteristics of metalloproteins adsorbed at a pyrolytic graphite "edge" electrode have been studied by analog dc cyclic voltammetry at scan rates up to 3000 V s-1. The voltammetry of four proteins, azurin (a "blue" copper protein) and three 7Fe ferredoxins, reveals oxidation and reduction peaks that display only modest increases in width and peak separation as the scan rate is raised. This is indicative of a substantially homogeneous population of noninteracting centers which undergo rapid electron exchange with the electrode. Both the Butler--Volmer and Marcus models have been tested. The electrochemical kinetics, as reflected by k0 (the rate at zero overpotential), are too fast to allow the determination of reorganization energies by this method. Nonetheless, the rapid and energetically coherent nature of the electron transfer enables the cyclic oxidation and reduction of protein redox centers to be examined on a time scale sufficiently short to recognize coupled processes occurring in the millisecond time domain, which are characteristic of the protein under investigation. Two of the ferredoxins display increasingly asymmetric voltammetry as the scan rate is increased, which is attributed to the coupling of electron transfer to conformational (or orientational) changes. For azurin, the use of higher electrolyte concentrations enables studies to be made at scan rates up to 3000 V s-1, from which a standard electron-transfer rate constant in the region of 5000 s-1 is obtained. At these high scan rates, azurin still shows very symmetrical voltammograms but with peak shapes displaying a more gradual decrease in current, at increasing overpotential, than is predicted using realistic values of the reorganization energy. The ability to measure even faster rate constants and access coupled reactions occurring in shorter time domains is likely to be limited by complex processes occurring on the graphite surface.     

Interferometric seeing measurements on Mt. Wilson: power spectra and outer scales

We have measured power spectra of atmospheric phase fluctuations with the Mark III stellar interferometer on Mt. Wilson under a wide variety of seeing conditions. On almost all nights, the high-frequency portions of the temporal power spectra closely follow the form predicted by the standard Kolmogorov-Tatarski model. At lower frequencies, a variety of behavior is observed. On a few nights, the spectra clearly exhibit the low-frequency flattening characteristic of turbulence with an outer-scale length of the order of 30 m. On other nights, examination of individual spectra yields no strong evidence of an outer scale less than a few kilometers in size, but comparison of the spectra on different interferometer baselines shows a saturation of the spatial structure function on long baselines. This saturation is consistent with the assumption of an outer-scale length similar to that derived for the nights when low-frequency flattening of the spectra is clearly seen. We discuss possible explanations of this behavior and conclude that power spectra from a single interferometer baseline are a poor diagnostic for the effective outer scale compared with multiple-baseline spectra.