塑料注射模冷却系统的设计

分析和列举了注射模冷却系统设计的要点及注意事项；介绍了用CAE技术优化冷却系统设计的方法。     

笔式界面软件资源管理模型及其实现*

针对目前文档管理模式和WIMP界面交互范式对笔式交互的不足,提出了笔式界面软件文档资源管理的统一模型,能够有效地管理笔式界面软件所产生的文档数据,并且根据此模型实现了笔式界面的文档资源管理系统,采用了PIBG交互范式和实物界面.评估结果表明,根据此模型设计的系统,能够提高用户工作效率,降低用户的认知负担.     

Memristive neuron model with an adapting synapse and its hardware experiments

Electromagnetic induction effect caused by neuron potential can be mimicked using memristor. This paper considers a fluxcontrolled memristor to imitate the electromagnetic induction effect of adapting feedback synapse and presents a memristive neuron model with the adapting synapse. The memristive neuron model is three-dimensional and non-autonomous. It has the time-varying equilibria with multiple stabilities, which results in the global coexistence of multiple firing patterns. Multiple numerical plots are executed to uncover diverse coexisting firing patterns in the memristive neuron model. Particularly, a nonlinear fitting scheme is raised and a fitting activation function circuit is employed to implement the memristive mono-neuron model. Diverse coexisting firing patterns are observed from the hardware experiment circuit and the measured results verify the numerical simulations well.     

One-step fabrication superhydrophobic sand filter for capillary-driven separation of water-in-oil emulsions

The efficient separation of water-in-oil emulsion is of significance in environment and energy filed, and it has become a world-wide challenge. Herein, we have presented a one-step, facile and low-cost approach to prepare superhydrophobic sands for efficient separation of water-in-oil emulsion. The as-prepared sand layers possessed a water contact angle higher than 151°, demonstrating their superior superhydrophobic property. Besides, the as-prepared sand layers could separate water-in-emulsions with separation efficiency up to 99.7%, which is superior to both traditional and superwettable filtration membranes. The effect of thickness of sand layer on separation performance was also investigated. The results showed that the filtration flux decreased with the increased of filtration thickness while the separation efficiency increased. The as-prepared sand layer proposed by this study is a processing candidate for separating water-in-oil emulsion in practical industry. Additionally,the as-prepared superhydrophobic sand fabrication method also provides an alternative for desert water storage.     

系统振荡对变压器阻抗保护的影响测试方法研究

对于变压器阻抗保护,系统振荡时测量阻抗的幅值与相角都会发生周期性的变化,为避免测量阻抗进入保护的动作区时保护误动作,变压器阻抗保护增加振荡闭锁逻辑.简要介绍了系统振荡对变压器阻抗保护影响的三种测试方法,并对比三种方法的利弊.     

新能源汽车电池负极材料的制备与性能研究

采用原位合成法制备了镍-氧化镍/多孔碳纳米片（Ni-NiO/PCNs）负极材料,对比分析了氯化钠模板、退火温度和退火时间对负极材料物相组成、显微形貌和电化学性能的影响。结果表明,Ni/PCNs、Ni-NiO/C和Ni-NiO/PCNs负极材料都主要含有镍和无定型C相,且后2种负极材料还含有氧化镍相;300 ℃/4 h为Ni-NiO/PCNs负极材料适宜的退火工艺,此时Ni-NiO/PCNs负极材料中Ni-NiO粒子分散性较好且保持着三维片层结构,平均尺寸约为27 nm,Ni-NiO实现了对无定型C的包裹;退火时间过长（6 h）会使得镍粒子过氧化且发生团聚,而温度过高（400 ℃）会使得粒子以团聚为主,三维片层状结构消失。电流密度为1 A/g、循环5 000圈后Ni-NiO/PCNs负极材料的放电比容量为235 mA·h/g,此时的放电比容量约为首圈放电比容量的83.93%;Ni-NiO/C和Ni/PCNs负极材料在充放电循环过程中以及循环5 000圈后的放电比容量和容量保持率都明显低于Ni-NiO/PCNs负极材料,Ni-NiO/PCNs负极材料具有更好的循环稳定性,这主要与其具有独特的多孔三维片层结构有关。     

静磁场对ZK60镁合金组织的影响

试验发现在镁合金的凝固过程中施加静态磁场能有效细化晶粒，减小晶界化合物的厚度，同时，出现了大量细小块状化合物，这有利于提高镁合金的成形性能。     

客车常用锻件锤上模锻CAPP系统的开发

介绍了以VisualBasic为开发平台 ,以SOLIDWORKS为图形工具的锤上模锻CAPP系统 ,系统的使用者只需输入零件几何参数 ,即可自动进行冷、热锻件及模锻工艺的设计 ,从而彻底克服了传统模锻工艺设计的缺点     

快速低温固体S—C—N三元共渗工艺研究

以木炭、尿素和硫化铁为渗剂,用稀土化合物CeCl_3作催渗剂,于570℃进行固体S-C-N三元共渗。试验结果表明,在相同时间内加催渗剂的渗层深度比不加催渗剂的有大幅度提高,且硬度及耐磨性亦有较大提高,硬度梯度较平缓。离子探针分析表明,稀土元素Ce亦被渗入钢的表面,它不仅起到活化渗剂的作用,同时在提高钢的性能方面还起到微合金化的作用。     

稀有金属杂多化合物的脱硫脱硝性能研究

对稀有金属钨、钼的典型杂多化合物HCP(Heteropoly Compound Comprising)进行了同时脱硫脱硝性能对比研究.发现磷钼酸钠对SO2,NOx具有较高的去除效率.在此基础上,以磷钼酸钠为对象,考察了温度、吸收剂浓度、pH值、气流中氧含量等多种因素对体系性能的影响.实验结果表明:磷钼酸钠溶液对SO2,NOx的脱除率分别可达92%与55%;体系的同时脱硫脱硝效率随温度升高而有所降低,适宜温度为室温;提高吸收剂浓度、增加溶液pH值,均能显著增强体系的脱硫脱硝性能;气流中氧含量的提高,对NOx的脱除有显著的促进作用,但却在一定程度上削弱了体系的脱硫效果.对比发现:磷钼酸钠体系对SO2和NOx的脱除率均高于Fe-EDTA体系.