A novel SAL-PINSCH quantum-well laser structure for a pinched beamdivergence

Summary form only given. An edge-emitting strained AlGaAs/InGaAs/GaAs quantum-well laser structure is reported. It has a periodic index separate confinement heterostructure (PINSCH) optical confinement layers for a small beam divergence and high output power. Preliminary measurements of AR/HR-coated self-aligned ridge waveguide lasers show a CW output power of up to 350 mW and a 20° transverse beam divergence at a 980-nm lasing wavelength. This low beam divergence results in a high coupling efficiency of 51% into single-mode fibers. The expanded optical field in PINSCH confinement layers significantly pinches the transverse beam divergence and increases the maximum output power     

An Analog Front‐End Circuit for ISO/IEC 14443‐Compatible RFID Interrogators

An analog front‐end circuit for ISO/IEC 14443‐compatible radio frequency identification (RFID) interrogators was designed and fabricated by using a 0.25 µm double‐poly CMOS process. The fabricated chip was operated using a 3.3 Volt single‐voltage supply. The results of this work could be provided as reusable IPs in the form of hard or firm IPs for designing single‐chip ISO/IEC 14443‐compatible RFID interrogators.     

Impedance matching by series condensers for power receivers of in vivo robotic capsules

An impedance matching technique using series condensers for the power receivers of in vivo robotic capsules is proposed. The power delivery function of the condenser ratio and its optimal ratio are derived. Experimental results validate the derived function.     

A comparison of lightness contrast effects in CRT and surface colours

The simultaneous contrast effect is investigated in this article. A total of 174 and 154 test/induction combinations were studied for CRT and surface colours respectively. Each combination was assessed by nine observers using a matching technique. The test and induction colours used for CRT colours were similar to surface colours using fabric samples. The results indicated a strong lightness contrast effect for both CRT and surface media; that is, the lightness of a test colour surrounded by a lighter induction colour was reduced for both CRT and surface colours. However, the effect in CRT medium was more pronounced than in the surface medium. © 2004 Wiley Periodicals, Inc. Col Res Appl, 30, 13–20, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20074     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of elastic recovery on the electrical contact resistance in anisotropic conductive adhesive assemblies

The successful design of anisotropic conductive adhesive (ACA) assemblies depends mainly on the accurate prediction of their electrical contact resistance. Among the parameters that influence this resistance, the bonding force used to compress the conductive particles against the conductive tracks during the assembly process is very important. This paper investigates how the contact resistance changes as the bonding force is removed at the end of the assembly process when the epoxy resin used to bond the surfaces has cured. The final contact resistance is determined by examining, through theoretical, experimental and numerical analyzes, the evolution of the residual stress as the elastic recovery of the compressed conductive particles and tracks takes place when the bonding force is removed. An iterative algorithm derived from methods found in fracture mechanics analysis is used to determine the relationship between the contact resistance, the adhesive strength and the stiffness of the cured resin. It is shown that smaller values of adhesive strength yield higher contact resistance values; and similarly, smaller values of modulus of elasticity of the resin lead to higher contact resistance values.     

The effect of exchanger inhibitory peptide (XIP) on sodium-calcium exchange current in guinea pig ventricular cells

While the osteopenia associated with oestrogen deficiency is thought to arise from a relative defect in bone formation with respect to resorption, oestrogen administration itself leads to a decrease, rather than an increase, in bone formation. This decrease in bone formation, which arises from oestrogen's inhibitory effect on bone turnover, presumably masks any underlying tendency of oestrogen treatment towards stimulation of bone formation. To investigate this further, we have examined the early effect of discontinuing the administration of oestradiol-17 beta (OE2; 40 micrograms/kg) on bone formation indices in ovariectomized 13-week-old rats, before the turnover-induced increase in formation occurs. Histomorphometric indices were assessed at the proximal tibial metaphysis 0, 7, 10, 13 and 16 days following discontinuation of OE2 treatment. Measurements of body weight, uterine weight and longitudinal growth rate confirmed that there were rapid effects of OE2 deficiency on these parameters. We could detect no significant increase in bone resorption, as measured by osteoclast surface and number, until 16 days after ending treatment with OE2; this was coincidental with a reduction in bone volume. Shorter periods of OE2 deficiency were associated with a marked decrease in bone formation, as assessed by dynamic histomorphometric indices. This inhibition of bone formation was largely due to a reduction in double fluorochrome-labeled trabecular surfaces, which were decreased by approximately 70%. We conclude that ending OE2 administration in ovariectomized rats caused a striking decrease in trabecular bone formation, if such indices are assessed prior to the subsequent turnover-induced increase in formation.(ABSTRACT TRUNCATED AT 250 WORDS)     

Time series modeling and spectrum analysis for chatter mode in endmilling dynamics

To analyze the chatter mechanics, the power spectrum of a time series method was analyzed by considering cutting and structural dynamics. In this study, several time series models such as AR (burg, least square, yule walker, geometric lattice, instrument variable), ARX (arx, iv4), ARMAX, ARMA, Box Jenkins, Output Error were modeled and compared with one another. Finally, it was proved that arx, armax and iv4 are more desirable and reliable algorithms than the others for the calculation of the chatter mode in the endmilling operation. The cutting forces Fx and Fz have more powerful effects on the chatter than Fy in the sense that there is no shifting or pseudo mode in the power spectrum.     

A CMOS ratio-independent and gain-insensitive algorithmicanalog-to-digital converter

This paper describes the design of a CMOS capacitor-ratio-independent and gain-insensitive algorithmic analog-to-digital (A/D) converter. Using the fully differential switched-capacitor technique, the A/D converter is insensitive to capacitor-ratio accuracy as well as finite gain and offset voltage of operational amplifiers. The switch-induced error voltage becomes the only major error source, which is further suppressed by the fully differential structure. The proposed A/D converter is designed and fabricated by 0.8 μm double-poly double-metal CMOS technology. The op-amp gain is only 60 dB and no special layout care is done for capacitor matching. Experimental results have shown that 14-b resolution at the sampling frequency of 10 kHz can be achieved in the fabricated A/D converter. Thus it can be used in the applications which require low-cost high-resolution A/D conversion