Extraction of halide quaternary salts in an organic solvent/water system: Hydrodynamics and mass transfer

The hydrodynamic characteristics and mass transfers of halide quaternary salts between two immiscible phases in a stirred membrane permeation cell were investigated. The concentration of quaternary salt, temperature, solvent and the four kinds of halide quaternary salts were evaluated to achieve the extractive optimum condition. The diffusivity, overall mass‐transfer coefficients and individual mass‐transfer coefficients were determined and correlated in terms of the conventional Sh‐Re‐Sc relationship. The transfer time of quaternary salts across the membrane and the thickness of the hydrodynamic diffusion boundary layer were determined as well, so as to characterize the extractive phenomenon of quaternary salts between the two phases that is useful in phase‐transfer catalysis.     

Patient thermal comfort requirement for hospital environments in Taiwan

This study examines the comfort criteria of ASHRAE Standard 55-2004 for their applicability in hospital environments. Through an extensive field survey conducted in a university hospital in Taiwan, 927 sets of data have been collected. Above half of the measured samples failed to meet the specifications of Standard 55 comfort zone due to improper humidity control. Acceptability votes by patients exceeded the Standard's 80% criterion, regardless of whether the physical conditions were in or out of the comfort zone. Thermal neutrality, preference and comfort range are compared with other studies conducted in office environments and Standard 55 criteria. Results of chi-square tests revealed that patients’ physical strength significantly effected their thermal requirements. The net effect of health yields a marked difference in thermal neutrality and preference, and also in the comfortable temperature range.     

High performance concentrators and superconcentrators usingmultiplexing schemes

Concentrators are used to interface and combine together low speed communication channels onto higher speed transmission links to alleviate transmission costs. They are also used to construct more powerful switching fabrics such as permutation and broadcast networks. Using an adaptive binary sorting network model, this paper constructs new concentrators and superconcentrators. Unlike the previously reported concentrators and superconcentrators, these new constructions are fast, and ran easily be implemented using simple switching devices. More specifically, for n inputs, they can be constructed with O(n lg lg n) constant fanin bit-level multiplexers and demultiplexers, and can be routed in O(lg² n) bit-level time     

Low RF noise and power loss for ion-implanted Si having an improved implantation process

Very-low-transmission line noise of <0.25 dB at 18 GHz and low power loss /spl les/0.6 dB at 110 GHz have been measured on transmission lines fabricated on proton-implanted Si. In contrast, a standard Si substrate gave much higher noise of 2.5 dB and worse power loss of 5 dB. The good RF integrity of proton-implanted Si results from the high isolation impedance to ground, as analyzed by an equivalent circuit model. The proton implantation is also done after forming the transmission lines at a reduced implantation energy of /spl sim/4 MeV. This enables easier process integration into current VLSI technology.     

Characterization of in Vitro Transdermal Iontophoretic Delivery of Insulin

In-vitro studies were conducted to characterize the transdermal iontophoretic delivery of insulin, thus avoiding potential complications from various biological variations, which may be encountered during in-vivo studies. The proteolytic degradation of insulin in skin homogenates and degradation under the experimental conditions used was investigated. Appropriate adjuvants were incorporated to minimize the potential degradation problems of insulin. ¹²⁵I-Insulin was observed to penetrate into and accumulate in the skin during the iontophoresis period. It was then released gradually from this depot, as a mixture of intact and ¹²⁵-I labelled fragments, into the receptor medium. Drug desorption studies supported the theory of skin depot or reservoir formation. It was found that an electric field could be used to facilitate the desorption of drug from the depot. The post-application flux of insulin (or its fragments) from the skin depot formed during iontophoresis was monitored to study the factors affecting the iontophoretic delivery of insulin. Stripping and delipidization of the skin were noted to increase the skin permeation rate of insulin. The cumulative radioactivity permeated and accumulated in the skin was higher at pH 3.6 than at pH 7.4. The iontophoresis-facilitated transdermal delivery was observed to increase with increasing duration of current application and increasing donor concentration of insulin. Modulation of drug delivery by multiple applications was also found to be feasible.     

Effects of α‐form or β‐form nuclei on polymorphic crystalline morphology of poly(butylene adipate)

The effects of α‐form and β‐form nuclei on polymorphic morphology of poly(butylene adipate) (PBA) upon recrystallization from the molten state up to various T_max values were examined by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and polarized light microscopy (PLM). In this study, PBA with complex melting and polymorphism behaviour was used as a model for examining different types and extents of residual nuclei. As the PBA initially containing the sole α‐crystal was brought to a molten state of various T_max, the extents of trace α‐form crystal nuclei varied and were dependent on T_max. Furthermore, it did not matter whether, initially, the PBA contained α‐ or β‐form crystals (or both) because only a single type of α‐nuclei could be left upon treatment to the molten liquid state at T_max. Therefore, only the α‐crystal in PBA had ‘memory capacity’ in the molten liquid state while the β‐crystal did not. This was so because the latter had been completely transformed into the solid state prior to being heated into a liquid. PBA crystallized before α‐nuclei could be packed into α‐crystal, regardless of the crystallization temperature (T_c). For recrystallization from molten PBA without any nuclei, the crystalline polymorphism was correspondingly influenced by T_c. Copyright © 2005 Society of Chemical Industry     

Methylaluminoxane/haloalkane as initiator system for styrene polymerization

Summary Styrene polymerization was initiated by methylaluminoxane in the presence of haloalkane. The propagating species are shown by trapping experiments and electron paramagnetic resonance to be both radicals and cations.     

Structure Development Study of Pb (Zr, Ti)O3 Thin Films by an Optical Method

Lead zirconate titanates (Pb (Zr_xTi_1–x)O₃ or PZT) are well-known materials with useful ferroelectric properties for nonvolatile memory applications. The device applications usually require processes which form the ferroelectric perovskite phase at low temperatures. Understanding the various aspects of structure development of PZT films is the key to develop low-temperature processes. An effective, versatile, and nondestructive optical method was developed for the study of the structure development in PZT films. Also, models for the structure development were proposed and were verified by this optical method. Using this method, the characteristic temperatures at which both pyrochlore phase and perovskite phase are initiated and completed were identified. The pyrochloreperovskite transformation was initiated at lower temperature and completed faster for the films on the titanium-rich side than those on the zirconium-rich side. In addition, the volume fractions of the perovskite phase were obtained as a function of annealing temperature by this optical method.     

High‐Tg Carbazole Derivatives as Blue‐Emitting Hole‐Transporting Materials for Electroluminescent Devices

A series of dicarbazolyl derivatives bridged by various aromatic spacers and decorated with peripheral diarylamines were synthesized using Ullmann and Pd‐catalyzed C–N coupling procedures. These derivatives emit blue light in solution. In general, they possess high glass‐transition temperatures (T_g > 125 °C) which vary with the bridging segment and methyl substitution on the peripheral amine. Double‐layer organic light‐emitting devices were successfully fabricated using these molecules as hole‐transporting and emitting materials. Devices of the configuration ITO/HTL/TPBI/Mg:Ag (ITO: indium tin oxide; HTL: hole‐transporting layer; TPBI: 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene) display blue emission from the HTL layer. The EL spectra of these devices appear slightly distorted due to the exciplex formation at the interfaces. However, for the devices of the configuration ITO/HTL/Alq₃/Mg:Ag (Alq₃ = tris(8‐hydroxyquinoline)aluminum) a bright green light from the Alq₃ layer was observed. This clearly demonstrates the facile hole‐transporting property of the materials described here.