Limitations on the uses of multimedia exposure measurements for multipathway exposure assessment--Part II: Effects of missing data and imprecision.

Multimedia data from two probability-based exposure studies were investigated in terms of how missing data and measurement-error imprecision affected estimation of population parameters and associations. Missing data resulted mainly from individuals'refusing to participate in certain measurement activities, rather than from field or laboratory problems; it suggests that future studies should focus on methods for maximizing participation rates. Measurement error variances computed from duplicate-sample data were small relative to the inherent variation in the populations; consequently, adjustments in nonparametric percentile estimates to account for measurement imprecision were small. Methods of adjustment based on lognormality assumptions, however, appeared to perform poorly.     

The effect of solidification time and heat treatment on the fatigue properties of a cast 319 aluminum alloy

Solidification time and heat treatment are known to have a large effect on the microstructure of cast aluminum alloys. This study was conducted to quantify how the fatigue properties of a 319-type aluminum alloy are affected by solidification time and heat treatment. Both porosity-containing (non-hot isostatically pressed (HIP)) and porosity-free (HIP) samples in the T6 (“peak aged”) or T7 (“overaged”) heattreated conditions were tested. As the solidification time increased, the average initiating pore diameter increased and stress-controlled fatigue life decreased. Heat treatment was observed to have a large effect on fatigue properties of the HIP samples. However, in the non-HIP fatigue samples, heat treatment did not significantly change the fatigue life or fatigue strength of the cast 319-type alloy. The absence of an influence of heat treatment on fatigue response is attributed to the predominance of the microporosity in fatigue crack initiation in cast aluminum.     

Multifamily Housing Characteristics and Tenant Satisfaction

This paper examines the long-term impact of structural features and physical amenities on the residential satisfaction of renters in multifamily housing. A cumulative logit analysis of 7,206 rented multifamily units in the 2005 American Housing Survey indicates that features creating separated space (additional room, bathroom, garage/carport, or balcony/patio) were associated with significantly higher satisfaction, even when holding total unit area constant. Conversely, violation of space separation by noise intrusion through walls, floors, or ceilings created dramatically negative effects. Other amenities such as a fireplace, disposal, or dishwasher had no statistically significant impact. Tracking a cohort of 5,170 rented multifamily units from 1997 to 2005 revealed somewhat similar effects on the satisfaction trajectory of residents during this period. More bathrooms, bedrooms, and other rooms, as well as the presence of a balcony/patio were associated with satisfaction improvements. Analyzing cohort units undergoing modifications during the tracking period revealed that the addition of a bathroom or central air conditioning had the clearest impact on satisfaction, followed by the addition of a balcony/patio, other room, dishwasher, or garage/carport.     

From the Editors.

We could not imagine a more appropriate inauguration of the Psychology of Aesthetics, Creativity, and the Arts (PACA) going to four issues per year than with a special issue honoring the life and work of the great aesthetician and psychologist, Rudolf Arnheim. PACA is off to a great start. With this move to four issues per year, we are restarting our numbering system, so this special issue is Volume 1, Issue 1. As you read the articles in this issue, we hope that you enjoy reflecting on how much Rudolf Arnheim has contributed to the field of psychology of aesthetics. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Emergency department status boards: user-evolved artefacts for inter- and intra-group coordination

Large, easily viewed status boards are commonly used in some healthcare settings such as emergency departments, operating theaters, intensive care units, and inpatient wards. Because these artefacts were developed by front-line users, and have little to no supervisory or regulatory control, they offer valuable insights into the theories of work and hazard held by those users. Although the status boards case were locally developed over many years for within-group coordination, they have also become useful for between-group coordination across organizational boundaries. In this paper, we compare and contrast the use of such status boards in two disparate settings: a US emergency department, and a UK pediatric ward, and note striking similarities in their form and usage, despite the large differences in setting.     

Unicode Steganographic Exploits: Maintaining Enterprise Border Security

Unicode is rapidly becoming the preferred means for representing symbols used in creating multimedia content, especially for information that's presented in multiple languages. This article discusses a unicode vulnerability that makes such content susceptible to being used for creation of covert channel communications. We also developed a solution architecture, the unified secure message augmentation (USMA) service. The USMA service incorporates rules (in an XML vocabulary) that we can apply to unicode transmissions that will detect an attempt to transmit a potential exploit, alert network managers to the presence of the unicode anomaly, and take action to mitigate the exploit.     

Prevalence of weight reducing and weight gaining in adolescent girls and boys.

Surveyed the prevalence of weight reducing and weight gaining in 1,373 high school students. 63% of the girls and 16.2% of the boys reported being on weight-reducing regimens; 9.1% of the girls and 28.4% of the boys were trying to gain weight. Most female reducers and male gainers were already normal weight. Whites and Hispanics were more likely to be reducing, whereas Blacks were more likely to be gaining. Exercise and moderate caloric reduction were most popular for weight reducing, and a small but significant number were regularly using fasting, vomiting, laxatives, and appetite suppressants. The rate of weight reducing in female high school adolescents has increased significantly since similar surveys of American youths 20 yrs ago. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

用单芯片CDC和IDC提高精密度和准确度

传统的高精密电容检测和阻抗检测应用需要将一套收集的分立器件巧妙的组合起来以提供完整的测量解决方案。这种方法不仅在器件选择方面十分耗时，并且由于各个应用之间即使有很小的差异，也需要做大量设计验证、评估、优化和鉴定。     

Numerical models of creep and boundary sliding mechanisms in single-phase, dual-phase, and fully lamellar titanium aluminide

Finite element simulations of the high-temperature behavior of single-phase γ, dual-phase α₂+γ, and fully lamellar (FL) α₂+γTiAl intermetallic alloy microstructures have been performed. Nonlinear viscous primary creep deformation is modeled in each phase based on published creep data. Models were also developed that incorporate grain boundary and lath boundary sliding in addition to the dislocation creep flow within each phase. Overall strain rates are compared to gain an understanding of the relative influence each of these localized deformation mechanisms has on the creep strength of the microstructures considered. Facet stress enhancement factors were also determined for the transverse grain facets in each model to examine the relative susceptibility to creep damage. The results indicate that a mechanism for unrestricted sliding of γ lath boundaries theorized by Hazzledine and co-workers leads to unrealistically high strain rates. However, the results also suggest that the greater creep strength observed experimentally for the lamellar microstructure is primarily due to inhibited former grain boundary sliding (GBS) in this microstructure compared to relatively unimpeded GBS in the equiaxed microstructures. The serrated nature of the former grain boundaries generally observed for lamellar TiAl alloys is consistent with this finding.     

Experimental peri-implant tissue breakdown around hydroxyapatite-coated implants

Factor V Leiden mutation was initially detected in thrombophilic patients and relatives by PCR RFLP (Restriction Fragment Length Polymorphism) according to Bertina (1). This technique presents some drawbacks and the current trend is to simplify the diagnosis. We describe a technique of Allele Specific Amplification (ASA) which is optimized in terms of reliability: an additional mismatch in antepenultimate position enables to obtain the same specificity as PCR RFLP. Furthermore, coamplification of internal control warrants an optimal sensitivity. All the PCR have been simplified: the DNA extraction improvement allows to analyse the genotype with only a few microliters of whole blood whatever the anticoagulant and the procedure of preservation (freezing, dried blood spots, storage at +4 degrees C for several days). This technique saves time. Moreover, full automation of the ASA technique may be shortened thanks to the lack of extraction and the positive/negative reading of the PCR signal.