高校多媒体教室有效性管理探究

随着多媒体技术的不断发展及多媒体教学的普及,高校的多媒体教室日益增多,加大了管理的难度。在人力资源有限的情况下,怎样有效管理多媒体教室是亟待解决的问题。本文笔者通过分析管理中出现的问题,测试了多种管理方式,并分析了它们的优缺点,最后确定使用多媒体教室管理系统软件方式来有效管理多媒体教室。     

任务与兴趣驱动教学法在《计算机网络实用技术》教学中的应用

针对现阶段职业教育中计算机网络专业普遍存在的问题,从兴趣任务驱动教学法入手,以《计算机网络实用技术》课程为例,对课程的教学理念、教学实施过程及实施效果进行了探索。     

钛合金粉末注射成形溶剂脱脂工艺研究

采用粉末注射成形方法制备了钛合金坯体，然后利用溶剂脱脂方法脱除坯体中可溶性粘结剂。通过对溶剂脱脂动力学分析表明，在脱脂过程中，存在动力学控制步骤转化的过程，提出了脱脂临界厚度的概念。当厚度超过5mm时，试样脱脂过程受扩散控制，在常温下进行溶剂脱脂时，其扩散系数为1．86×10^-6cm^2·s^-1，活化能为12．96kJ．mol^-1.K^-1；在厚度小于5mm时，试样脱脂过程受粘结剂溶解和扩散混合控制。     

真空烧结炉预估自适应温控系统设计

论文在分析真空炉温控对象特性的基础上,提出一种PID参数自适应控制算法,该算法首先在试生产阶段采用继电自整定方式得到几组基准PID参数,此后在每炉正式生产时,利用升温阶段的信息预估由于装炉量不同等原因所带来的参数变化,预估结束及时对这几组PID基准参数进行在线更新。实例改造结果表明,该智能控制方案简单、有效,完全满足硬质合金真空烧结炉温度的控制要求。     

利用“球化效应”激光扫描制备球形Ti粉的研究

利用“球化效应”，在SLS设备上探索将异形Ti粉转化为高性能球形粉末的可行途径。通过系统地改变激光功率、扫描速度，以及选取合适的激光扫描间距，探明了形成“球化效应”的工艺条件，并在激光功率为600W，扫描速度为30mm／s时，获得了较为理想的球形Ti粉。通过对球化过程进行理论分析，得出了选取激光扫描制备球形Ti粉工艺参数的准则。     

CREEP BEHAVIORS OF Pt-RE ALLOYS AT HIGH TEMPERATURES

The creep behaviors of Pt-RE alloys have been studied at 1200℃ and 1400℃.The results show that asmall amount of RE elements improves the creep behaviors of platinum greatly.The creep behaviors of PtGd0.5,PtLa0.5 and PtLa0.3 Gd0.2,are best among all the alloys studied.As far as the creep behaviors are concerned,the traditional heat-resistance alloy PtGd10 can be replaced by PtGd0.5.Particularly,the properities of PtGd0.5are near to those of PtRb10.For most of the Pt-RE alloys,long-time,static,super high-temperature treatment inair is of no advantage to the creep rupture life.The mechanisms of the effects of rare-earths on high-temperaturecreep properties of platinum are discussed.     

应用人工神经网络理论建立热粘塑性材料的本构关系

本文将人工神经网络（ＡＮＮ）用于建立热粘塑性材料的本构关系，意在探索出一种描述材料变形力学行为的新方法。文中给出了应用人工神经网络建立热粘塑性材料本构关系的ＢＰ模型和学习算法过程，并应用于４５号钢在高温和高速变形条件下的流动应力计算。计算结果与实测结果比较表明，二者吻合良好。因此，应用人工神经网络建立热粘塑性材料的本构关系具有重要的工程应用价值。     

Enhanced Photoelectrochemical Performance of Hematite Photoanode by Decorating NiCoP Nanoparticles Through a Facile Spin Coating Method

Catalysis Letters - Hematite (α-Fe2O3) is a potential photoanode material for photoelectrochemical (PEC) water splitting, but its short hole diffusion length and low water oxidation kinetics...     

PVP-assisted Sn-Ti microspheres for the efficient B–V oxidation of cyclohexanone

Journal of Porous Materials - New Sn-Ti microspheres were first successfully synthesized by a PVP-assisted sol-gel method in this paper, and their performance in the B–V oxidation of...     

Rational Design of Ag/ZnO Hybrid Nanoparticles on Sericin/Agarose Composite Film for Enhanced Antimicrobial Applications

Silver-based hybrid nanomaterials are receiving increasing attention as potential alternatives for traditional antimicrobial agents. Here, we proposed a simple and eco-friendly strategy to efficiently assemble zinc oxide nanoparticles (ZnO) and silver nanoparticles (AgNPs) on sericin-agarose composite film to impart superior antimicrobial activity. Based on a layer-by-layer self-assembly strategy, AgNPs and ZnO were immobilized on sericin-agarose films using the adhesion property of polydopamine. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray powder diffraction spectroscopy were used to show the morphology of AgNPs and ZnO on the surface of the composite film and analyze the composition and structure of AgNPs and ZnO, respectively. Water contact angle, swelling ratio, and mechanical property were determined to characterize the hydrophilicity, water absorption ability, and mechanical properties of the composite films. In addition, the antibacterial activity of the composite film was evaluated against Gram-positive and Gram-negative bacteria. The results showed that the composite film not only has desirable hydrophilicity, high water absorption ability, and favorable mechanical properties but also exhibits excellent antimicrobial activity against both Gram-positive and Gram-negative bacteria. It has shown great potential as a novel antimicrobial biomaterial for wound dressing, artificial skin, and tissue engineering.