Intuitionistic fuzzy rough sets: at the crossroads of imperfect knowledge

Abstract: Just like rough set theory, fuzzy set theory addresses the topic of dealing with imperfect knowledge. Recent investigations have shown how both theories can be combined into a more flexible, more expressive framework for modelling and processing incomplete information in information systems. At the same time, intuitionistic fuzzy sets have been proposed as an attractive extension of fuzzy sets, enriching the latter with extra features to represent uncertainty (on top of vagueness). Unfortunately, the various tentative definitions of the concept of an ‘intuitionistic fuzzy rough set’ that were raised in their wake are a far cry from the original objectives of rough set theory. We intend to fill an obvious gap by introducing a new definition of intuitionistic fuzzy rough sets, as the most natural generalization of Pawlak's original concept of rough sets.     

Optimal greenhouse gas emissions in NGCC plants integrating life cycle assessment

The optimal design of an energy-intensive process involves a compromise between costs and greenhouse gas emissions, complicated by the interaction between optimal process emissions and supply chain emissions. We propose a method that combines generic abatement cost estimates and the results of existing (LCA) life cycle assessment studies, so that supply chain emissions are properly handled during optimization. This method is illustrated for a (NGCC) natural gas combined cycle power plant model with the following design and procurement options: procurement of natural gas from low-emissions producers, fuel substitution with (SNG) synthetic natural gas from wood, and variable-rate CO₂ capture and sequestration from both the NGCC and SNG plants. Using multi-objective optimization, we show two Pareto-optimal sets with and without the proposed LCA method. The latter can then be shown to misestimate CO₂ abatement costs by a few percent, penalizing alternate fuels and energy-efficient process configurations and leading to sub-optimal design decisions with potential net losses of the order of $1/MWh. Thus, the proposed LCA method can enhance the economic analysis of emissions abatement technologies and emissions legislation in general.     

Modeling and detecting response of micromachining square and circular membranes transducers based on AlN thin film piezoelectric layer

Vibration analysis of square and circular piezoelectric micro ultrasonic transducers (pMUTs) in the 100 kHz range as a function of experimental tools are reported. Analytical and 3D finite element method analysis using Comsol software has been performed to model static, modal and vibration behavior of these membranes. Comparison with standard impedancemeter measurement is shown to assess the performance of Laser Doppler Vibrometry system. Mechanical and electrical characterization and comparison with a model results are presented and discussed. The measured resonances frequencies of membrane can be weak and superimposed on important parasitic signal, which may mask the desired mechanical resonance signal. Our results revealed the real roles of the simulations and the combination of the experimental tools to get measurement accuracy. Subsequently, this piezoelectric micro-transducer was successfully tested as a sounder in air. These investigations offer guidance for the pMUTs design and associated electronic circuit but might at the same time be instructive and beneficial to further sensor applications.

     

Mo–Si–B alloys for ultra-high-temperature space and ground applications: liquid-assisted fabrication under various temperature and time conditions

Journal of Materials Science - Boron-doped molybdenum silicides have been already recognized as attractive candidates for space and ground ultra-high-temperature applications far beyond limits of...     

Analysis of electromigration phenomenon in thick-film and LTCC structures at elevated temperature

Studies on electromigration phenomenon in thick-film structures on alumina and LTCC substrates are presented in this paper. The effects of storage of Au and Ag electrode patterns in temperature range up to 300 °C under voltage bias were examined. The leakage characteristics of electrodes with 100 μm spacing at 50 V dc bias as a function of time and temperature are presented and analyzed. Scanning electron microscope (SEM) equipped with the energy-dispersive X-ray spectroscopy (EDX) detector was applied for determination of metal ions transport. Test structures with Au-based conductive material are much more resistant to electromigration than Ag-based layers.     

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Kinetic Energy Approach to Dissolving Axisymmetric Multiphase Plumes

A phenomenological kinetic energy theory of buoyant axisymmetric multiphase plumes is constructed, with particular attention to the modeling of the dispersed phase. The dissolution is treated by means of the Ranz-Marshall equation involving a mass-transfer coefficient dependent on the plume properties. The model is compared with various experiments, yielding satisfactory agreement. A central ingredient in the model is the turbulent correlation parameter I, playing a role analogous to the conventional entrainment coefficient α. We use experimental data to suggest a relationship between I, the initial gas flux at the source, and the depth of the gas release.     

Influence of the microstructure of gums on the mechanical properties of silicone high consistency rubbers

This paper is devoted to the characterization and processing of high molar mass vinyl‐bearing polysiloxanes in high consistency silicone rubber (HCR) formulations. The molar masses of five different polydimethylsiloxane gums, bearing vinyl groups at the ends and along their chains, were evaluated by size exclusion chromatography and rheometry. ²⁹Si and ¹H NMR spectroscopy allowed the precise determination of the vinyl content and of the distribution in the different polymers. Typical HCRs formulated from these gums were heat‐cured to process silicone rubber materials that were then tested mechanically. The macromolecular properties were correlated to the final material network structure. The amount of reactive vinyl moieties, rather than their distribution along or at the end of chains, is a key parameter to tailor the material mechanical properties. © 2016 Society of Chemical Industry