Zur Reaktivität des Methoxybutenons

Reactivity of Methoxybutenone (trans)4-Methoxy-but-3-en-2-one shows as a vinylen homologous ethyl acetate 4 functional groups: C,C-double bond, methyl, carbonyl, and methoxy group. Examples for the special reactivities are given. Cyclization reactions are reported mostly with the carbon atoms 4+2 and 4+3.     

Molecular markers of anthropogenic activity in sediments of the Havel and Spree Rivers (Germany)

Detailed gas chromatographic/mass spectrometric analyses have been applied to sediment samples of the Havel and Spree River, tributaries to the Elbe River, in order to identify specific molecular markers of anthropogenic activities. Despite a wide variety of lipophilic organic compounds from diffuse anthropogenic contamination, a local emission of an industrial point source was reflected by specific markers including halogenated compounds and nitrogen containing substances (4-ethylnitrobenzene, formyl piperidine, acetyl piperidine). In addition to well-known anthropogenic markers various new molecular tracers were detected and are discussed, namely plasticizers (alkylsulfonic acid aryl esters, tributyl and tricresyl phosphates), synthetic fragrances (galaxolide, tonalide, 4-oxoisophorone), additives of personal care products (4-methoxycinnamic acid 2-ethylhexyl ester, benzyl benzoate, dibenzyl ether, benzophenone), occurring due to sewage treatment plant input.     

Titanium implants and BMP-7 in bone: an experimental model in the rabbit

This study evaluates the effect of rhBMP-7/OP-1 on the osseointegration of commercially pure titanium implants in an experimental implant model in rabbits. Threaded titanium implants with two transverse parallel canals were inserted in the femur and tibia of rabbits. The canals were filled with, 10 g of BMP-7/collagen carrier, pure collagen carrier or were left empty as a control. The stiffness of the implant fixation was evaluated by Resonance Frequency Analysis (RFA) at baseline and four weeks postoperativly. Percentage of bone ingrowth in the canals was measured on microradiographs. Histomorphometry along the threaded part of the implants was performed on 15 m thin sections. The results from the RFA demonstrated a higher mean value for the BMP-7 treated implants in the tibia than the carrier treated implants but not compared to the control implants. The control implants in the tibia demonstrated more bone ingrowth in the upper canal than to the carrier or the BMP-7 treated implants. Apart from these differences there were no significant effects of BMP. In this study BMP-7 did not contribute to any substantially improved bone anchorage of titanium implants.     

A Parallel Dynamic Binary Translator for Efficient Multi-Core Simulation

In recent years multi-core processors have seen broad adoption in application domains ranging from embedded systems through general-purpose computing to large-scale data centres. Simulation technology for multi-core systems, however, lags behind and does not provide the simulation speed required to effectively support design space exploration and parallel software development. While state-of-the-art instruction set simulators (Iss) for single-core machines reach or exceed the performance levels of speed-optimised silicon implementations of embedded processors, the same does not hold for multi-core simulators where large performance penalties are to be paid. In this paper we develop a fast and scalable simulation methodology for multi-core platforms based on parallel and just-in-time (Jit) dynamic binary translation (Dbt). Our approach can model large-scale multi-core configurations, does not rely on prior profiling, instrumentation, or compilation, and works for all binaries targeting a state-of-the-art embedded multi-core platform implementing the ARCompact instruction set architecture (Isa). We have evaluated our parallel simulation methodology against the industry standard Splash-2 and Eembc MultiBench benchmarks and demonstrate simulation speeds up to 25,307 Mips on a 32-core x86 host machine for as many as 2,048 target processors whilst exhibiting minimal and near constant overhead, including memory considerations.     

Cleaning for Improved Indoor Air Quality: an Initial Assessment of Effectiveness

Abstract A study was conducted to characterize the indoor environment of a multifloor, multiuse, nonproblem, noncompliant building through long-term monitoring for biological, chemical, and particulate pollutants. The study also assessed the effects of cleaning on indoor air quality by providing a program to monitor baseline levels, providing a rigorous (deep) cleaning of the building, and then continuing to monitor after implementation of a standardized, improved, cleaning program. To assess the effectiveness of the cleaning program, air, surface, and dust data from monitoring prior to the cleaning program were compared with those obtained while the improved housekeeping program was in place. Correlations between pollutants and other environmental factors were studied. The data suggest that the improved cleaning program contributed to indoor air quality through the reduction of airborne dust mass, total volatile organic compounds, and culturable bacteria and fungi.     

Evaluation of calcium hydroxide contents in pozzolanic cement pastes by a chemical extraction method

The aim of the study is to investigate the calcium hydroxide (Ca(OH)₂) contents in pozzolanic cement pastes analyzed by the chemical extraction method and thermal analysis (DTA/TG). The second part of the study involves the carbonation of pozzolanic cement pastes and its influence on Ca(OH)₂ reduction. The Ca(OH)₂ contents in cement pastes after being subjected to accelerated carbonation were investigated by a chemical extraction method and compared to those values from DTA/TG analysis. The experimental results show that the chemical method reveals overall results comparable to those from DTA/TG analysis. However, in case of pastes containing high amounts of mineral admixtures or pastes subjected to carbonation which contain very low Ca(OH)₂, only the chemical method yields precise reliable results by showing the pseudo-negative contents.     

Integrated-optic polarisation convertor on (001)-InP substrate

A novel TE/TM convertor is proposed and demonstrated which is fabricated on (001)-InP substrate and can be integrated with TE-TM phase shifters to provide a general polarisation transformation. Some aspects of the technological realisation and first results are given; in a first attempt, a polarisation rotation of about 20 deg by 20 V could be demonstrated.     

Enantioselective hydrogenation of ethyl pyruvate Long-term performance of chirally modified Pt/zeolite catalysts

The long-term performance of 5 wt.% Pt/zeolite catalysts (HNaY with different degrees of ion exchange) modified with (−)cinchonidine was studied. The enantioselective hydrogenation of ethyl pyruvate to R(+)ethyl lactate was used as the model reaction. The Pt/zeolites are effective catalysts for long-term use, if the chiral modifier is added before each cycle of hydrogenation. The optimal ratio between the amount of catalyst and chiral modifier essentially depends on both the specific Pt surface area of the catalyst and the solvent used. It is found that the use of acetic acid as solvent results in a higher long-term performance than cyclohexane. This is due to the competitive adsorption between the chiral auxiliary and acetic acid on the Pt surface. Furthermore, the acidity of the solvent results in a weakening of the (−)cinchonidine/Pt interaction, which prevents an overloading of the Pt surface area with (−)cinchonidine or its decay products. This effect was determined by means of differential thermal analysis and elemental analysis. When cyclohexane is used as the solvent, the long-term performance is significantly improved by raising the carrier acidity.     

Thermomechanische Behandlung von Manganhartstählen

Die durch Walzen oder Schmieden im Bereich von 700 bis 1050°C thermomechanisch behandelten Manganhartstähle X 120 Mn 12 und X 120 MnCrSiV 12 werden unter Einbeziehung einer anschließenden Haltedauer bei Umformtemperatur bzw. bei 440°C bezüglich ihres Gefüges und ihrer Eigenschaften vergleichend untersucht. Es zeigt sich, daß die Legierungszusätze an Chrom, Silicium und Vanadin eine höhere Umformtemperatur zur Erzielung einer gewünschten Verfestigung zulassen und damit die thermomechanische Behandlung erleichtern. Der Verschleißwiderstand wird nicht beeinträchtigt.