提高托盘利用效率的重要手段——电子信息化管理

托盘能否有效运用对物流的畅通与否关系重大,这已经引起了国内外专家和学者们的重视,并就此制定了托盘电子信息化管理系统,旨在更合理地使用托盘,推进托盘一体化和共用系统的建立。而RFID技术在托盘的电子信息化管理的应用更将大大提高物流的效率与准确性,托盘电子信息化管理将成为今后托盘管理的趋势。     

Second harmonic generation from a ferroelectric film

We derive an expression for transmittivity (T_SHG) of second harmonic generation (SHG) signals from a ferroelectric (FE) film. Intensities of up and down fields in the medium are investigated in relation to T_SHG. The derivations are made based on undepletion of input fields and nonlinear wave equation derived from the Maxwell equations. We present two cases: film without mirrors and with partial mirrors. Expressions for the newly derived nonlinear susceptibility coefficients of SHG for real crystal symmetry [J. Opt. Soc. Am. B 19 (2002) 2007] are used to get more realistic results. Variations in T_SHG with respect to film thickness are illustrated.     

Implicit Motor Learning in Parkinson's Disease.

Objective: This study examined whether disruption of performance is moderated in Parkinson's disease (PD) patients who acquire their motor behaviors in an implicit manner. Method: Twenty-seven patients with PD learned a hammering task in errorless (implicit) or errorful (explicit) conditions and were tested for robustness of motor performance under a secondary task load, which required them to continuously count backward as they performed the hammering task. Results: Patients in the errorless (implicit) motor learning condition exhibited robustness to secondary task loading, whereas patients in the errorful (explicit) motor learning condition did not. Conclusions: Implicit motor learning techniques should be considered by PD rehabilitation specialists in cases in which existing disruption to movements is exacerbated by conscious control. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

H.264变换编码与量化原理及优化研究

本文分析了H.264视频编码标准中的整数变换和量化过程。H.264采用从DCT变换演化而来的4×4整数变换,使变换算法复杂度减小,同时消除了浮点运算导致的失配现象。将尺度调整融合在量化过程中,减少乘法次数,使H.264标准相对于以前的编码标准更加有效。同时通过采用SSE2指令,实现H.264变换与量化的优化算法,实验结果表明此算法有效地提高了编码速度。     

1/f noise in large-area Hg<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>Te photodiodes

The 1/f noise in photovoltaic (PV) molecular-beam epitaxy (MBE)-grown Hg_1−xCd_xTe double-layer planar heterostructure (DLPH) large-area detectors is a critical noise component with the potential to limit sensitivity of the cross-track infrared sounder (CrIS) instrument. Therefore, an understanding of the origins and mechanisms of noise currents in these PV detectors is of great importance. Excess low-frequency noise has been measured on a number of 1000-μm-diameter active-area detectors of varying “quality” (i.e., having a wide range of I-V characteristics at 78 K). The 1/f noise was measured as a function of cut-off wavelength under illuminated conditions. For short-wave infrared (SWIR) detectors at 98 K, minimal 1/f noise was measured when the total current was dominated by diffusion with white noise spectral density in the mid-10⁻¹⁵A/Hz^1/2 range. For SWIR detectors dominated by other than diffusion current, the ratio, α, of the noise current in unit bandwidth i_n(f = 1 Hz, V_d = −60 mV, and Δf = 1 Hz) to dark current I_d(V_d = −60 mV) was α_SW-d = i_n/I_d ∼ 1 × 10⁻³. The SWIR detectors measured at 0 mV under illuminated conditions had median α_SW-P = i_n/I_ph ∼ 7 × 10⁻⁶. For mid-wave infrared (MWIR) detectors, α_MW-d = i_n/I_d ∼ 2 × 10⁻⁴, due to tunneling current contributions to the 1/f noise. Measurements on forty-nine 1000-μm-diameter MWIR detectors under illuminated conditions at 98 K and −60 mV bias resulted in α_MW-P = i_n/I_ph = 4.16 ± 1.69 × 10⁻⁶. A significant point to note is that the photo-induced noise spectra are nearly identical at 0 mV and 100 mV reverse bias, with a noise-current-to-photocurrent ratio, α_MW-P, in the mid 10⁻⁶ range. For long-wave infrared (LWIR) detectors measured at 78 K, the ratio, α_LW-d = i_n/I_d ∼ 6 × 10⁻⁶, for the best performers. The majority of the LWIR detectors exhibited α_LW-d on the order of 2 × 10⁻⁵. The photo-induced 1/f noise had α_LW-P = i_n/I_ph ∼ 5 × 10⁻⁶. The value of the noise-current-to-dark-current ratio, α appears to increase with increasing bandgap. It is not clear if this is due to different current mechanisms impacting 1/f noise performance. Measurements on detectors of different bandgaps are needed at temperatures where diffusion current is the dominant current. Excess low-frequency noise measurements made as a function of detector reverse bias indicate 1/f noise may result primarily from the dominant current mechanism at each particular bias. The 1/f noise was not a direct function of the applied bias.     

Effect of Sb implantation on copper silicides formation and morphology after annealing of Cu/Si structures

In this work, the solid state reaction between a thin film of copper and silicon has been studied using Rutherford backscattering spectroscopy, X-ray diffraction, scanning electron microscopy and microprobe analysis. Cu films of 400 and 900 Å thicknesses are thermally evaporated on Si(1 1 1) substrates, part of them had previously been implanted with antimony ions of 5×10¹⁴ or 5×10¹⁵ at. cm⁻² doses. The samples are heat-treated in vacuum at temperatures in the range 200–700 °C for various times. The results show the growth and formation of Cu₃Si and Cu₄Si silicides under crystallites shape dispatched on the sample surface, independently of the implantation dose. On the other hand, it is established that the copper layer is less and less consumed as the antimony dose increases, resulting in the accumulation of Sb⁺ ions at silicide/Si interface and in the silicide layer close to surface. The exposure of samples to air at room temperature shows the stability of Cu₄Si phase whereas the Cu₃Si silicide disappears to the benefit of the silicon dioxide formation. The observed phenomena are discussed.     

两两NQD列乘积和的Jamison型强稳定性的一个注记

讨论了不同分布两两NQD列的Jamison型加权乘积和的强稳定性。推广了不同分布独立列部分和和同分布NQD列部分和情形相类似的结论，得到了一些新的结果。     

Logarithmic wavelength demultiplexers

A general approach for a full 1 /spl times/ N demultiplexer using a tree of filter stages is proposed. The device architecture is compact, requiring at least N - 1 filter stages, and flexible, as each filter stage can be arbitrarily designed, with the only constraint of the half-band power property. The filters can be realized using any optical filtering techniques as thin-film interference, Bragg gratings, or planar delay-line circuits. The performances of the proposed architecture are illustrated with respect to different lattice-form finite impulse response (FIR) and infinite impulse response (IIR) filter stages, showing that the demultiplexer inherently presents low crosstalk and flat passband. A design example of a 1 /spl times/ 4 demultiplexer consisting of three all-pass (AP) filters is compared with a generalized Mach-Zehnder interferometer (MZI) with four AP filters in its arms, showing that the two approaches achieve similar results.