9SiCr钢中的筐篮编结状马氏体及其性能

将9SiCr钢的粒状原始组织改变为片状,再经830℃淬火后,其马氏体形态为筐篮编结状。而传统工艺所获得的马氏体形态为针状.这种筐篮编结状马氏体是9SiCr钢中一种崭新的组织形态,其精细结构为平行成束的板条。亚结构为高密度缠结位错.它有良好的综合机械性能,强韧性高,耐磨性高。     

Mass-Balance Model of Pulmonary Oxygen Transport

A dynamic lumped-parameter model for pulmonary gas transport has been developed to characterize the lung and predict the effect of various parameter changes. The gas side of the lung is modeled as a series and parallel arrangement of five perfectly mixed, variable-volume compartments that correspond roughly to airway and alveolar regions. The blood side of the lung is modeled as a series of perfectly mixed, constant-volume compartments that represent the pulmonary capillary bed. From nonsteady mass balances, equations are derived which yield the time course of concentration for each compartment. Model simulations indicate that the oxygen-hemoglobin reaction does not reach equilibrium in the pulmonary capillaries, an assumption commonly made in analyses of pulmonary oxygen transport. Simulations also show the extent to which breathing amplitude and rate can affect the oxygen level in the blood leaving the lung. A comparison of simulations for a normal state and chronic obstructive lung disease (COLD) with identical input conditions demonstrates that the oxygen level in the blood leaving the lung is much lower in COLD. Also, the simulations are compared with experimental findings.     

Utilising semantic technologies for intelligent indexing and retrieval of digital images

The proliferation of digital media has led to a huge interest in classifying and indexing media objects for generic search and usage. In particular, we are witnessing a colossal growth in digital image repositories that are difficult to navigate using free-text search mechanisms, which often return inaccurate matches as they in principle rely on statistical analysis of query keyword recurrence in the image annotation or surrounding text. In this paper we present a semantically-enabled image annotation and retrieval engine that is designed to satisfy the requirements of the commercial image collections market in terms of both accuracy and efficiency of the retrieval process. Our search engine relies on methodically structured ontologies for image annotation, thus allowing for more intelligent reasoning about the image content and subsequently obtaining a more accurate set of results and a richer set of alternatives matchmaking the original query. We also show how our well-analysed and designed domain ontology contributes to the implicit expansion of user queries as well as the exploitation of lexical databases for explicit semantic-based query expansion.     

类球形低硫磷酸铁的制备技术研究

磷酸铁（FePO₄）是锂电池正极材料磷酸铁锂（LiFePO₄）的核心前驱体,FePO₄形貌及硫含量对合成的LiFePO₄材料性能有重要影响。为得到类球形低硫FePO₄产品,在传统液相沉淀法技术基础上做了改进优化,添加十六烷基三甲基溴化铵（CTAB）作为形貌助剂提高产品球形度,添加氨水作为配体形成磷酸铁铵配合物改善结晶过程,降低产品硫含量。结果表明：所制备的FePO₄产品硫质量分数低,达到2.6×10 ^-5,形貌为均一的微米类球形颗粒,D₅₀=11.4 μm,振实密度达到1.22 g/cm ³,有望成为制备高压实密度LiFePO₄材料的核心前驱体。     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Unusual kinetic inhibitor effects on gas hydrate formation

Gas hydrate formation experiments were conducted with a methane-ethane mixture at 273.7 or 273.9 K and 5100 kPa and using water droplets or water contained in cylindrical glass columns. The effect of kinetic inhibitors and the water/solid interface on the induction time for hydrate crystallization and on the hydrate growth and decomposition characteristics was studied. It was found that inhibitors GHI 101 and Luvicap EG delayed the onset of hydrate nucleation. While this inhibition effects has been reported previously some unusual behaviour was observed and reported for the first time. In particular, the water droplet containing GHI 101 or Luvicap EG was found to collapse prior to nucleation and spread out on the Teflon surface. Subsequently, hydrate was formed as a layer on the surface. Catastrophic growth and spreading of the hydrate crystals was also observed during hydrate formation in the glass columns in the presence of the kinetic inhibitor. Finally, when polyethylene oxide (PEO) was added into the kinetic inhibitor solution the memory effect on the induction time decreased dramatically.     

Effect of rare earth elements surface treatment on tensile properties of aramid fiber‐reinforced epoxy composites

Solutions of rare earth modifier (RES) and epoxy chloropropane (ECP) grafting modification method were used for the surface treatment of aramid fiber. Tensile properties of both the aramid/epoxy composites and single fibers were tested. The effects of RES concentration on tensile properties of aramid/epoxy composites were investigated in detail to explore an optimum amount of rare earth elements in solution for modifying aramid fiber. The fracture surface morphologies of tensile specimens were observed and analyzed with the aid of SEM. The experimental results show that rare earth treatment is superior to ECP grafting treatment in promoting interfacial adhesion between the aramid fiber and epoxy matrix. Meanwhile, the tensile strengths of single fibers were almost not affected by RES treatment. The optimum performance is obtained when the content of rare earth elements is 0.5 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1037–1041, 2004     

A Comparison of the Levels of Lutein and Zeaxanthin in Corn Germ Oil,Corn Fiber Oil and Corn Kernel Oil

All commercial corn oil is obtained by pressing corn germ and/or extracting the germ with hexane. In the current study, six types of corn oil were prepared by extracting corn germ, corn fiber and ground corn, each with hexane or with ethanol. The levels of lutein, zeaxanthin and other carotenoids were quantitatively analyzed in the six corn oils. The levels of lutein + zeaxanthin in the oil ranged from 2.3 μg/g for hexane-extracted corn germ oil to 220.9 μg/g for ethanol-extracted ground corn oil. These results indicate that a diet that includes 30 g (~2 tbsp) per day of the unrefined corn oil obtained by extracting ground corn with ethanol would provide ~6 mg of lutein + zeaxanthin, the daily dosage that is currently considered to be necessary to slow the progression of age-related macular degeneration. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Activation of a Au/TiO2 Catalyst by Loading a Large Amount of Fe–Oxide: Oxidation of CO Enhanced by H2 and H2O

Catalytic activity of a 1 wt% Au/TiO₂ catalyst is markedly improved by loading a large amount of FeO_x, on which the oxidation of CO in excess H₂ is selectively promoted at temperature lower than 60 °C. Oxidation of CO with O₂ on the FeO_x/Au/TiO₂ catalyst is markedly enhanced by H₂, and H₂O moisture also enhances the oxidation of CO but its effect is not so large as the promotion by H₂. We deduced that activation of Au/TiO₂ catalyst by loading FeO_x is not caused by the size effect of Au particles but a new reaction path via hydroxyl carbonyl intermediate is responsible for the superior activity of the FeO_x/Au/TiO₂ catalyst.     

A Framework for Moving Least Squares Method with Total Variation Minimizing Regularization

In this paper, we propose a computational framework to incorporate regularization terms used in regularity based variational methods into least squares based methods. In the regularity based variational approach, the image is a result of the competition between the fidelity term and a regularity term, while in the least squares based approach the image is computed as a minimizer to a constrained least squares problem. The total variation minimizing denoising scheme is an exemplary scheme of the former approach with the total variation term as the regularity term, while the moving least squares method is an exemplary scheme of the latter approach. Both approaches have appeared in the literature of image processing independently. By putting schemes from both approaches into a single framework, the resulting scheme benefits from the advantageous properties of both parties. As an example, in this paper, we propose a new denoising scheme, where the total variation minimizing term is adopted by the moving least squares method. The proposed scheme is based on splitting methods, since they make it possible to express the minimization problem as a linear system. In this paper, we employed the split Bregman scheme for its simplicity. The resulting denoising scheme overcomes the drawbacks of both schemes, i.e., the staircase artifact in the total variation minimizing based denoising and the noisy artifact in the moving least squares based denoising method. The proposed computational framework can be utilized to put various combinations of both approaches with different properties together.