Precision winding of fiber optic filament. II. Winding control

For pt.I see ibid., vol.39, no.3, p.258-67 (1992). The winding of fiber optic filament in the hoop, or precision, pattern is considered. Various automatic control options that have been designed and tested are described. The controllers are designed to regulate the fiber lag angle, which is the angle at which the feed filament approaches the take-up spool. Successful, flawless winding is directly related to accurate lag regulation. The contributions are distinguished by the fact that the automatic winding rate is 10 to 30 times greater than that achieved before by operator-assisted winding     

Spouted and spout-fluid bed combustors 1: Devolatilization and combustion of coal volatiles

The devolatilization and volatile combustion of a single coal particle in spouted and spout-fluid beds have been studied. The results showed that the flame extinction time increases with the particle diameter, and decreases with the bed temperature. When the bed temperature and the air flow rate were fixed, the operation modes (spouted or spout-fluid bed) showed less effect on the mean flame extinction time. A mathematical model of the spouted bed mode for preignition and postignition periods has also been developed assuming the devolatilization rate to be controlled by heat transfer and multireaction pyrolysis kinetics based on volatile products. Ignition, heat transfer back from the volatile flame to the particle surface, variation in flame temperature, and the hydrodynamics of SB are taken into account. The model predictions, with some adjusting parameters, were in good agreement with experimental results.     

Methods to assess physical activity with special reference tomotion sensors and accelerometers

Motion sensors may be applied for the assessment of physical activity. This paper reviews the evolution of these instruments from the mechanical pedometer to the electronic accelerometer. We conclude that for accurate assessment of physical activity under free living conditions the recently introduced accelerometer looks most promising, although little information was available regarding the reliability of these instruments. Subsequently, reliability of an accelerometer with a three-directional sensor was examined. Intrainstrument variation in a bench test was less than 8% during four measurements over a week. Interinstrument variation during treadmill experiments while subjects wore two accelerometers at the same time was on average 22% and was not improved after adjustment for differences found in the bench test. Reproducibility in the treadmill experiment was approximately 76, 85, and 95% at 3, 5, and 7 km/h, respectively. Bench testing revealed that the sensitivity of a piezoelectric element is prone to shifts, probably due to mechanical, electromagnetic, and/or temperature shock, which may be encountered during outdoor application. However, the relevance of the bench test in this study may be questioned, as results did not correspond with the findings in subjects. This needs further investigation.     

Cimaterol and clenbuterol residue analysis by HPLC-HPTLC in liver.

A method has been developed for the analysis of cimaterol and clenbuterol residues in liver, with detection limits of 0.25 micrograms/kg and 0.5 micrograms/kg, respectively. The recovery varied from 55% to 60%. After extraction, a clean-up procedure with Baker-spe C-18 columns was performed. The two chemical compounds of interest were eluted with methanol. Cimaterol and clenbuterol were quantitatively determined by high-performance liquid chromatography (HPLC) using an RP-Select B (5 microns) column and a post-column reaction procedure. The positive results were confirmed by high-performance thin-layer chromatography (HPTLC) as this technique reaches the same level of sensitivity as the HPLC method.     

A new approach for displaying identities and differences among aligned amino acid sequences.

An algorithm is presented for computing degrees of sequence conservation found among aligned amino acid sequences. Sequence identities are calculated for each position of an alignment and average identity values of neighboring positions are figured. The average identity value of the whole alignment is chosen as a limit to discriminate between well and less conserved sequence sections. A second algorithm is given to calculate the degree of divergence of individual sequences compared to the other sequences of the alignment. The approach is easy to use on microcomputers and gives an exact picture of sequence identities and differences in order to determine, first, protein regions of high functional or structural importance among homologous proteins, and, second, significant differences of single sequences that may contribute to individual properties of the analysed protein. The method is illustrated by an example analysing a sequence alignment of higher plant nitrate reductases.     

Ultrafast all-optical switching in GaAlAs integrated interferometer in 1.55 mu m spectral region

The first observation is reported of ultrafast all-optical switching in an integrated asymmetric Mach-Zehnder interferometer, using the nonresonant nonlinearity in Ga/sub 0.82/Al/sub 0.18/As below half the bandgap. A relative switching fraction of more than 80% has been achieved using 330 fs pulses at around 1.55 mu m from a coupled-cavity mode-locked colour centre laser.<>