Transient Behavior of Gas Entrainment Caused by Surface Vortex

A compact sodium-cooled reactor is an important candidate as a fast breeder reactor (FBR) and has been investigated in the feasibility study of FBR cycle. Due to the compact sizing of the reactor vessel, gas entrainment at the free surface of sodium coolant becomes one of the significant issues for reactor design, and it is required to clarify the criterion of gas entrainment at free surface and the tolerance. In the present study, some visualization experiments were performed in a water-air system focusing on the gas entrainment due to surface vortex and its transient phenomena. Influences of horizontal velocity were clarified by the visualization. The gas entrainment due to the surface vortex occurs intermittently. Time trends of circulation and length of gas core for the intermittent surface vortices were measured by the particle image velocimetry and visualization. It was found that the gas core length extends with time delay to the increase of circulation around the vortex.     

A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

Imaging of a single atomic column in silicon grain boundary

Atomic resolution high voltage electron microscopy was applied in investigations of the atomic structure of [112] sigma3 CSL grain boundary of silicon. Images of the grain boundary, viewed in the < 110 > direction, showed two types of dark spots. One type was rod shaped, which represented an atomic pair aligned in the < 111 > direction. The other was a small round spot, which represented a single atomic column in the grain boundary. The atomic structure of [112] sigma3 CSL grain boundary was directly shown from the atomic-structure image.     

Electrochemical removal of p-nonylphenol from dilute solutions using a carbon fiber anode

p-Nonylphenol, which is widely used as raw material in industrial activities has been regarded as an environmental endocrine disrupter. In an effort to develop a new treatment method for p-nonylphenol, we initially investigated the electrochemical behavior of p-nonylphenol by voltammetric techniques. The electrochemical oxidation of p-nonylphenol led to the formation of electropolymerized film on the glassy carbon electrode surface. The fouling on the electrode surface by the electropolymerized film was evaluated by monitoring the electrode response of ferrocyanide ions as the redox marker. The electrochemical removal of p-nonylphenol based on the formation of the electropolymerized film on an anode surface was performed using a carbon fiber (CF) with a very large surface area. The high removal efficiency for p-nonylphenol was obtained by applying a potential at 0.7 V. The maximum surface coverage of electropolymerized p-nonylphenol on the CF was about 5 x 10(-9) mol/cm2. The presence of humic acid hardly inhibited the removal of p-nonylphenol. Furthermore, the application to the removal of phenol, o-chlorophenol, p-chlorophenol, 2,4-dichlorophenol, and 2,4,5-trichlorophenol was attempted by using this method.     

Molecular dynamics simulation of 〈<Emphasis Type="Bold">c</Emphasis>+<Emphasis Type="Bold">a</Emphasis>〉 dislocation core structure in hexagonal-close-packed metals

The core structures of 〈c+a〉 dislocations in hexagonal-close-packed (hcp) metals have been investigated by molecular dynamics (MD) simulation using a Lennard-Jones-type pair potential. The 〈c + a〉 edge dislocation has two types of core at 0 K; one is a perfect dislocation (type A), and the other has two 1/2 〈c+a〉 partials (type B). Type A transforms to type B by abruptly increasing temperature from 0 K to 293 K, while type B is stable in temperature range from 0 K to 293 K. In contrast, type A extends parallel to (0001) at 30 K, and this extended core is still stable at 293 K. These results suggest that the 〈c+a〉 edge dislocation glides on the {11 2} as two 1/2 〈c+a〉 partial dislocations and becomes sessile due to changes of the core structure. The 〈c+a〉 screw dislocation spreads over two {10 1} planes at 0 K. The core transforms into a unsymmetrical structure at 293 K, which is spread over {11 2} and {10 1}, and core spreading occurs parallel to {11 2} at 1000 K. A critical strain to move screw dislocations depends on the sense of shear strain. The dependence of the yield stress on the shear direction can be explained in terms of these core structures. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

A Novel Approach to the Polaronic Metallic State of Cuprate Superconductors and the d-Wave Pairing Mechanism

The present novel approach consists of two stages: in the first stage the many-electron states of a CuO₆ octahedron or a CuO₅ pyramid are calculated by the first-principles variational method, by taking into account the local distortions of a CuO₆ octahedron or a CuO₅ pyramid. In the second stage a metallic state is constructed in the presence of the local AF ordering constructed by the localized spins. In this metallic state the local distortions are treated in the mean field approximation, so that a pseudopolaronic effect is taken into account. Based on this approach, the hole-concentration dependence of T _c and the isotope effect are calculated for LSCO, and compared with experimental results. This approach leads to d-wave pairing mechanism.     

Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.     

基于长度的扩展方法的汉英句子对齐

本文提出了一种用于汉英平行语料库对齐的扩展方法。该扩展方法以基于长度的统计对齐方法为主,然后根据双语词典引入了词汇信息,而基于标点的方法作为对齐的后处理部分。这种扩展方法不仅避免了复杂的中文处理,例如,汉语分词和词性标注,而且在统计方法中引入了关键词信息,以提高句子对齐的正确率。本文中所用的双语语料是LDC 的关于香港的双语新闻报道。动态规划算法用于系统的实现。和单纯的基于长度的方法和词汇方法相比,我们的扩展方法提高了句子对齐的正确率,并且结果是比较理想的。     

Updated data dissemination methods for updating old replicas in ad hoc networks

In this paper, we propose two updated data dissemination methods to not only reduce the number of accesses to old replicas, but also to improve the data accessibility in ad hoc networks where data items are updated regularly. In the first method, when a mobile host updates a data item, it disseminates the updated data item after the flooding of with invalidation reports. In the second method, two newly connected mobile hosts disseminate updated data items with each other after the flooding with invalidation reports.