Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Response of inertinites from some Australian coals to non-catalytic hydrogenation in tetralin

Inertinite concentrates from three Australian bituminous coals were hydrogenated at various temperatures ranging from 350 to 475 °C in the presence of tetralin without any added catalyst. Both conversion yields and microscopic observations of the benzene-extracted hydrogenation residues have revealed that the hydrogenation of the inertinite macerals becomes significant only > 400 °C, whereas the dissolution-hydrogenation of the accompanying vitrinite macerals occurs mainly between 350 and 400 °C. The major reaction pathway for the inertinite particles in the hydrogenation process appears to be one of initial mild carbonization followed by hydrogenation. A simplified reaction scheme is proposed which describes the reaction pathway involved in the hydrogenation of inertinite.     

Magnetic resonance imaging study on the results of surgery for cervical compression myelopathy

The morphologic changes and signal intensity of the spinal cord on preoperative magnetic resonance images were correlated with postoperative outcomes in 74 patients undergoing decompressive cervical surgery for compressive myelopathy. The transverse area of the spinal cord on T1-weighted images at the level of maximum compression was closely correlated with the severity of myelopathy, duration of disease, and recovery rate as determined by the Japanese Orthopaedic Association score. In patients with ossification of the posterior longitudinal ligament or cervical spondylotic myelopathy, the increased intramedullary T2-weighted magnetic resonance imaging signal at the site of maximal cord compression and duration of disease significantly influenced the rate of recovery. A multiple regression equation was then developed with these three variables to predict surgical outcomes.     

Distinct promoter sequences of two precursor genes for salmon gonadotropin-releasing hormone in masu salmon

Three phase partitioning (TPP) uses t-butanol and ammonium sulfate to precipitate enzymes and proteins from aqueous solutions. The method is useful both upstream with crude samples and downstream where a scaleable simple step is needed. About 25 enzymes and proteins have been isolated by various laboratories using TPP-t-butanol. The relation of t-butanol used in TPP, with n-butanol used as an extraction agent from Morton's work, is reviewed. Some t-butanol appears bound to TPP-precipitated proteins which are actually protein-t-butanol coprecipitates. They float above denser aqueous salts because bound t-butanol increases their buoyancy, similar to the behavior of many lipoproteins. On redissolving TPP-precipitated enzymes, total and specific activities usually are regained and sometimes increased. Sulfate ion-in large concentrations-likely exerts itself through its kosmotropic action as in conventional salting out. t-Butanol likewise appears to be a kosmotrope and crowding agent at room temperature or above, whereas C1 and C2 cosolvents (e.g., ethanol) do not so behave except at near or below zero temperatures. However, kosmotropy is not the entire origin of TPP, nor probably of conventional salting out. Electrostatic forces, capacity to force protein conformation tightening and protein hydration shifts, also contribute. Electrostatic forces, and the tendency for salt ions to bind and tighten protein molecule conformation, are indicated by the sharp pH dependency of both conventional salting out and TPP, around pH regions where proteins undergo conformation changes. Sulfate anion is densely-perhaps extraordinarily-hydrated, adding much to its effective size, and therefore it has a tendency to crowd or exclude proteins, when sulfate concentrations are in the 0.5 to 3 M range.     

Object-oriented H.263 compatible video coding platform forconferencing applications

This paper describes a prototype video coding platform meant for the conception and testing of multimedia products such as next-generation videophones. The platform is largely based on ITU-T Recommendation H.263, with a number of additional object-oriented quality enhancement features which make it especially well suited for very low bit-rate coding of “head-and-shoulders” video material typical of real-time multimedia applications, video teleconferencing, and video telephony. These features consist of: (1) segmentation into objects of interest, (2) segmentation-based prefiltering, (3) model-assisted rate control, (4) adaptive vector quantization, and finally (5) segmentation-based postfiltering. In the spirit of Recommendation H.263, these enhancements are modular and can be selectively turned on or off, thereby enabling a wide variety of coding modes     

Laser Induced Periodic Structures on Polymer Surfaces

Subhalf micron (0.2 nm) space and amplitude linear periodic structures and an array of dot images are obtained with the Nd:YAG laser irradiation on Kapton polyimide films, poly(ethylene terephthalate) films, spin-coated polyimide films and others. Different from the excimer laser irradiation, which requires a polarizer, our solid state Nd:YAG laser source provides polarized beams without a polarizer with advantage over excimer laser irradiation. AFM and SEM studies have been carried out. XPS studies of laser exposed areas indicate no significant chemical reactions took place on exposed areas.     

Resistive superconducting transition of κ-type BEDT-TTF organic superconductors in a magnetic field

The superconducting transition of the organic compoundsκ-(BEDT-TTF)₂ X is studied by resistive measurement in a magnetic field up to 10 T applied normal to the conducting plane. For the salts withX=Cu[N(CN)₂]Br andX=CuCN[N(CN)₂] the transition shows fanshaped broadening caused by superconductivity fluctuation. For theX=Cu(NCS)₂ salt the resistivity shows a peak in the transition region in a magnetic field below 4 T.This phenomenon is suppressed in defect-reduced samples for intralayer conduction. We discuss this peak in relation to the thermal fluctuation on the Josephson junction structures in this salt.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.