Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone

Selective modification by ozonation for the surface of polyvinyl chloride (PVC) was evaluated to separate PVC from the other plastics, polyethylene terephthalate (PET), polycarbonate (PC) and polymethyl methacrylate (PMMA), with almost the same density as PVC by the froth flotation process. Ozonation could selectively decrease the contact angles of flexible PVC from 87.5 degrees to 68.4 degrees and rigid PVC from 90.3 degrees to 66.9 degrees, whereas little decreases in the contact angle were observed for other plastics. This would be due to the replacement of the chloride group on the surface of PVC, into hydrophilic functional groups; carbonyl, carboxyl and ester group. The PVC was successfully separated from the other plastics by the froth flotation process after the selective surface modification by ozonation.     

Ultra-high pressure sterilization of powdery food stuff—a new application of a roller compactor

A new non-heating technique was developed for the sterilization of food stuff. Applying a roller compactor, ultra-high pressure sterilization has experimentally demonstrated its ability to sterilize dry powders, such as corn flour and Chinese herbs, with little quality deterioration. Also, the degree of food sterilization was found correlated well with the linear press forces between the rollers, roller gaps, and number of compaction passes. In comparison to the conventional high pressure sterilization technique, the new dry continuous processing method has the advantage of lower investment cost and is more versatile for sterilizing various food powders.     

Dynamic Mechanical Properties and Adhesive Joint Strengths of Emulsion Polymers Produced by Power Feed Technique. III. Adhesive Joint Strengths of Grafted Power Feed Copolymer

Power feed copolymers were synthesized using styrene and n-butyl acrylate through non-uniform feeding emulsion polymerization. Poly(vinyl alcohol) (PVA) was used as a protective colloid, onto which vinyl monomers were grafted. Power feed copolymer had a very broad glass transition temperature compared with random copolymer, even if grafting and/or crosslinking were introduced to the system. This tendency was almost the same as the non-grafted power feed copolymer where only low molecular weight surfactant was used.

Adhesive joint strengths of power feed copolymers were evaluated compared with random copolymers. In the case of usual linear power feed copolymer, the adhesive joint strengths were not higher than those of random copolymer, which was considered to be due to the lower film strengths of the power feed copolymer. Power feed copolymer having grafting showed slightly higher adhesive joint strengths over a wide range of temperatures than random copolymer. When crosslinking was introduced to the system, power feed copolymer showed much higher adhesive joint strengths over a wide temperature range.     

Structural analysis of cellulose triacetate polymorphs by two-dimensional solid-state C-C and H-C correlation NMR spectroscopies

For the elucidation of the crystal structures of the two crystalline allomorphs of cellulose triacetate (CTA), namely CTA I and CTA II, two-dimensional (2D) solid-state through-bond ¹³C-¹³C and ¹H-¹³C correlations NMR techniques applied to the two crystalline allomorphs of CTA. As a result, the ¹³C and ¹H chemical shifts of the glucopyranose ring of CTA I and CTA II were completely assigned by the 2D NMR spectra of these allomorphs. On the 2D ¹³C-¹³C correlation spectrum of CTA II, two sets of the ¹³C-¹³C correlations from C1 to C6 were observed. This indicated that the CP/MAS ¹³C NMR spectrum of CTA II can be characterized by its overlapping of the ¹³C subspectra of two kinds of 2,3,6-triacetyl-anhydroglucopyranose units and that there are two magnetically non-equivalent sites in the unit cell of CTA II. In the case of CTA I, the numbers of respective ¹³C and ¹H shifts of CTA I agreed with the those of the glucopyranose residue in the allomorph, strongly suggesting that the asymmetric unit of CTA I is only one glucose residue. In addition, conformational differences in the exocyclic C5-C6 bonds between CTA I and CTA II were strongly suggested by the notable differences in the ¹H and ¹³C chemical shifts at the C6 sites of these allomorphs.     

Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.     

Effect of MgO Addition on the Bondability and Interfacial Reaction between Dielectric and Glass-Ceramics for the Fabrication of Multi-Component Ceramic Substrates

Bondability and interfacial reaction between dielectric and insulator layers have been examined to obtain a basic understanding of bonding mechanisms. Lead-containing complex perovskite was used as a dielectric material. Two kinds of glass-ceramics were used as insulator material; lead borosilicate glass containing Al_2O3 (insulator A) and the same containing Al₂O₃ and M_gO (insulator B). Dielectric and insulator layers did not bond when insulator A was used. When insulator B was used, however, strong bonding was achieved between the two layers by firing the powder compacts at temperatures between 800° and 1000°C. Addition of M_gO to lead borosilicate glass increased the thermal expansion coefficient to that of the dielectric and enhanced the formation of reaction layers, resulting in good bonding. Two reaction layers were identified. The main reaction products were enstatite and bredigite for one layer contacting the dielectric, and enstatite and a compound with the same diffraction pattern as that of faujasite for the other layers contacting insulator B.     

Reaction Pathways in the Synthesis of Photorefractive gamma-Bi12MO20 (M = Si, Ge, or Ti)

Reaction pathways in the synthesis of three photorefractive silicates—γ-Bi₁₂ SiO₂₀ (BSO), γ-Bi₁₂ GeO₂₀ (BGO), and gamma-Bi₁₂ TiO₂₀ (BTO)—were systematically investigated. The main results were as follows: (i) all the reactions of the form 6Bi₂O₃+ MO₂→> γ-Bi₁₂ MO₂₀ (SR1 for M = Si, SR2 for M = Ge, SR3 for M = Ti) in the solid state seemed to be diffusion-controlled processes and were affected by both temperature and time, where the reaction temperature increases in the order SR1 < SR2 < SR3; (ii) the metastable phases Bi₂ SiO₅ (tetragonal) in reaction SR1, Bi₂ GeO₅ (orthorhombic) in reaction SR2, Bi₄ Ti₃ O₁₂ (orthorhombic) in reaction SR3 may be formed and seemed to greatly accelerate the above-mentioned solid-state reaction processes; and (iii) for a continuous heating process, pure γ-Bi₁₂ SiO₂₀ and γ-Bi₁₂ GeO₂₀ could be produced before melting, whereas pure γ-Bi₁₂ TiO₂0 could not be produced, even if all the mixed phases had melted.     

Fatigue behavior of medium-density polyethylene pipes

A round bar specimen and a square bar specimen cut out from medium-density polyethylene pipes with a notch were made and a fatigue test was conducted to cause a brittle fracture. The initiation and growth of a craze and crack at the tip of a notch was observed. In the range where loading cycles are few and displacement of the specimen does not increase, the craze prior to crack initiation occurs. Also, the effect of frequency was investigated. The pure creep failure and the fatigue failure at low frequency were compared. The lower the frequency, the smaller the reciprocal of the actual loading time T_f becomes. It is also found that this tensile fatigue test is a useful test method to assure the quality of pipes.     

Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

Measurement of residual stresses in injection‐molded polymer parts by time‐resolved fluorescence

Time‐resolved fluorescence properties of 9‐methylanthracene (9MAn) dispersed in film of polyvinylchloride (PVC) containing carbon black were studied under tensile loadings. The fluorescence lifetime of 9MAn decreased from 5.70 to 5.55 ns, whereas the stresses acting on the films increased from 0 to 3 MPa. The change in fluorescence lifetimes of 9MAn during the stress relaxation process showed that the fluorescence lifetimes were correlated with the stresses, not with the strains. The results suggest that 9MAn is a useful probe for monitoring stresses acting on the matrix. With the use of the fluorescence properties of 9MAn, the residual tensile stresses on the skin‐layer of PVC injection‐molded test pieces were estimated. The estimated residual stresses were about ～ 1 MPa. The residual stresses were relaxed to 0 MPa with annealing at 100°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2600–2603, 2002