High-Temperature Fracture Mechanism of Low-Ca-Doped Silicon Nitride

High-purity Si₃N₄ (with 2.5 wt% glassy SiO₂) doped with 0 to 450 at.ppm of Ca was prepared as a model system to investigate the effects of grain-boundary segregants on fracture phenomenology at 1400°C. Subcritical crack-growth (SCG) resistance as well as creep resistance was degraded significantly by the presence of a small amount of Ca. The internal friction of the doped materials exhibited the superposition of a grain-boundary relaxation peak and a high-temperature background, and the apparent viscosity of the grain-boundary film was determined from the peak. Based on these experimental data, the fracture mechanism at 1400°C was divided into three regions: "brittle," SCG, and creep failure as a function of both external strain rate and Ca concentration, C _Ca. From the investigation of the C _Ca dependence of the critical strain rate for the transition from "brittle" to SCG fractures, the SCG phenomenon is suggested to be triggered by small-scale, grain-boundary sliding. The C _Ca dependence of "steady-state" creep rate was far from the theoretical dependence of diffusional creep via a solution-precipitation mechanism. The discrepancy was interpreted to be due to the presence of an impurity-insensitive creep component. This component may correspond to the lowest limit of the tensile creep rate in Si₃N₄ polycrystalline materials containing intergranular glassy-SiO₂ film.     

Influence of Metal Ions on the Order-Disorder Transition Temperature of the Ba-M-O (M: La, Y, In, or Ga) System

Preparation of BaLa₂O₄, B_a3,Y₄O₉, B_a,In₂O₅, and Ba₃Ga₂O₆ powders and their sintering were investigated in Ar or air. These sintered bodies with perovskite-related structure were synthesized by reaction sintering, using mixed powders in the atomic ratios of Ba/La = 1, Ba/Y = 0.75, Ba/In = 1, and Ba/Ga = 1.5. The order-disorder transition temperatures of the BaLa₂O₄, Ba₃Y₄O₉, Ba₂In₂O₅, and Ba₃Ga₂O₆ sintered bodies were 270°, 350°, 880°, and 123O^oC, respectively. It was found that the temperatures were influenced by the ionic radius of cations in B sites, and the transition temperatures decreased with increasing ionic radius.     

Effects of functional groups in glow discharge polymerization

Summary Glow discharge polymerizations of allyltrimethylsilane (ATMS) and trimethylvinyloxysilane (TMVOS) were investigated by elemental analysis and infrared spectroscopy. The formed polymers were far different in elemental composition from the starting materials, and possessed high carbon and hydrogen contents. There was less difference in an infrared-spectral sense between the two polymers from ATMS and TMVOS. A polymer-forming process in a discharge state is discussed.     

Role of tungsten in promoting selective reduction of NO with CO over Ir/WO3–SiO2 catalysts

Catalytic hydrogenation of naphthalene to decalin was studied over a carbon-supported rhodium catalyst in supercritical carbon dioxide solvent at 333 K, and the results were compared with those in an organic solvent. cis-, trans-Decalin and tetralin were formed from the beginning of the reaction in supercritical carbon dioxide. Higher concentration of hydrogen in carbon dioxide solvent and on the active site, and also the suppression of desorption of partially hydrogenated tetralin molecules from the active site would be responsible for higher selectivity to cis-decalin in supercritical carbon dioxide than that in an organic solvent.     

Design of High-Quality Pt–CeO2 Composite Anodes Supported by Carbon Black for Direct Methanol Fuel Cell Application

A Pt on nano-sized CeO₂ particles that in turn are supported on carbon black (CB) was synthesized using the co-impregnation method. This potential anode material for fuel cell applications was synthesized in a stepwise process. The pure CeO₂ was synthesized using an ammonium carbonate precipitation method, and the Pt particles dispersed on the CeO₂ in such a way that a uniform dispersion with the CB was obtained (Pt–CeO₂/CB). The electrochemical activity of the methanol (CH₃OH) oxidation reaction on the Pt–CeO₂/CB was investigated using cyclic voltammetry and chronoamperometry experimentation. The onset potential of CH₃OH oxidation reaction on the Pt–CeO₂/CB anode was shifted to a lower potential as compared with that on commercially available Pt–Ru/carbon (C) alloy anode. In addition, the activation energy of the Pt–CeO₂/CB anode was much lower than that of the Pt–Ru/C alloy anode. Moreover, the current density of the Pt–CeO₂/CB anode was much higher than that of the Pt–Ru/C alloy anode at temperatures between 28° and 60°C. These results suggest that the anode performance of the Pt–CeO₂/CB anode at the operating temperature of typical fuel cells (80°C) is superior to that of the more usual Pt–Ru/C alloy anode. Importantly, the rare metal, Ru, is not required in the present anode material and the amount of Pt required is also significantly reduced. As a consequence, we report a promising candidate Pt–CeO₂/CB composite anode for application in the development of direct methanol fuel cells.     

Carbonization and liquid-crystal (mesophase) development. 12. Mechanisms of the co-carbonization of coals with organic additives

In industrial situations, coals interact with solvents or additives to produce liquid fuels, solvent-refined coal, coal extract and metallurgical coke. In these processes there occurs a wide variation in effects or modifications of the coal by these additives. This paper describes the modifications which can occur, using a wide range of rank of coal, when these coals interact and are co-carbonized with a wide range of additives of different chemical properties. The optical texture of the resultant cokes is given special attention. The objective of the paper is to summarize the current state of knowledge of the mechanisms of these interactions. Possible mechanisms of interactions are summarized, kinetic and chemical structural aspects of reactions are outlined, the importance is mentioned of the formation of liquid phases enabling anisotropic optical textures in modified cokes to be created, and the industrial relevance of its possible development is discussed.     

Effects of Enantiomeric Blend of Verbenone on Response ofIps paraconfusus to Naturally Produced Aggregation Pheromone in the Laboratory

The aggregation pheromone produced by maleIps paraconfusus (Coleoptera: Scolytidae) tunneling in Monterey pine,Pinus radiata, logs was trapped on Porapak Q. A concentration of an extract of trapped volatiles that attracted beetles was determined in the laboratory through a concentration–response analysis of walking behavior of males and females. The interruptant effects of four concentrations of verbenone on response to a constant concentration of this naturally produced aggregation pheromone were tested with males and females. Independent of its enantiomeric composition [99.5% (S)-(–), 93.1 % (S)-(–), and 98.3% (R)-(+)], verbenone significantly reduced the percentage of females (but not males) reaching the attractant source. However, when the time required for beetles of both sexes taken together to reach the attractant source was considered, verbenone of higher enantiomeric purity had a greater effect on beetle behavior. Solutions of 99.5% (S)-(–)- and 98.3% (R)-(+)-verbenone increased the time required for beetles to reach the attractive source when compared to 93.1% (S)-(–)-verbenone. When pooled across enantiomeric blends, increasing concentrations of verbenone resulted in slower responses in beetles that reached the attractant source within 2 min. Males and females did not respond to verbenone alone.     

Influence of dry operating conditions: observation of oscillations and low temperature CO oxidation over Co3O4 and Au/Co3O4 catalysts

A Sm(III) exchanged NaY zeolite prepared from aqueous SmCl₃ was modified with various amounts of fluorine using NH₄F. These fluorinated zeolites exhibit enhanced catalytic activity for the dealkylation of cumene. The evaluation of acid sites by infrared spectroscopy and pyridine adsorption was correlated with fluorine content.     

Diffusion process of amino acids in polymer supports for solid‐phase peptide synthesis as studied by pulsed‐field‐gradient spin‐echo proton nuclear magnetic resonance

The diffusion coefficient (D) values of tert‐butyloxycarbonyl‐glycine, tert‐butyloxycarbonyl‐L ‐tryptophan, tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐Phe), and 9‐fluorenylmethoxycarbonyl‐L ‐phenylalanine in Merrifield polystyrene (MPS) gels, poly(ethylene glycol)‐grafted polystyrene (PEG–PS) gels, and crosslinked ethoxylate acrylate (CLEAR) gels, as used in solid‐phase peptide synthesis, were determined by the pulsed‐field‐gradient spin‐echo ¹H‐NMR method. From these experimental results, it was found that the amino acids in MPS gels, PEG–PS gels, and CLEAR gels with N,N‐dimethylformamide‐d₇ (DMF‐d₇) as a solvent had multidiffusion components within a measurement timescale of 10 ms. The D value of Boc‐Phe in polystyrene gels (1% divinylbenzene crosslinked) with tetrahydrofuran‐d₈ was much larger than that in the same gels with DMF‐d₇. Furthermore, the required time in which an amino acid transferred from a reactive site to a reactive site was estimated, within which the solvents and amino acids in the polymer supports diffused in the swollen beads.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 413–421, 2003