A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements

 A three-dimensional dynamic program for the anaysis of large deformations in contact-penetration problems is developed using the finite element Lagrangian method with explicit time integration. By incorporating a tetrahedral element, which allows a single-point integration without a special hourglass control scheme, this program can be more effective to the present problem. The position code algorithm is used to search contact surface. Eroding surfaces are also considered. The defense node algorithm was slightly modified for the calculation of contact forces. A study of obliquity effects on metallic plate perforation and ricochet processes in thin plates impacted by a sphere was conducted. It is well simulated that on separation of two parts of the sphere, the portion still within the crater tends to perforate, while the portion in contact with the plate surface ricochets. This deformation pattern is observed in experiments, especially at high obliquities. A long rod that impacts an oblique steel plate at high impact velocity was also simulated in order to study the dynamics of the rod caused by the three dimensional asymmetric contact. The agreement between simulated and experimental results is quite good. Fracture phenomena occuring at high obliquity deserves further investigations. Received: 20 February 2002 / Accepted: 20 September 2002     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Enhanced thermal stability of a sputtered titanium-nitride film as a diffusion barrier for capacitor-bottom electrodes

The effect of a thin RuO_x layer formed on the Ru/TiN/doped poly-Si/Si stack structure was compared with that on the RuO_x/TiN/doped poly-Si/Si stack structure over the post-deposition annealing temperature ranges of 450–600°C. The Ru/TiN/poly-Si/Si contact system exhibited linear behavior at forward bias with a small increase in the total resistance up to 600°C. The RuO_x/TiN/poly-Si/Si contact system exhibited nonlinear characteristics under forward bias at 450°C, which is attributed to no formation of a thin RuO_x layer at the RuO_x surface and porous-amorphous microstructure. In the former case, the addition of oxygen at the surface layer of the Ru film by pre-annealing leads to the formation of a thin RuO_x layer and chemically strong Ru-O bonds. This results from the retardation of oxygen diffusion caused by the discontinuity of diffusion paths. In particular, the RuO_x layer in a nonstoichiometric state is changed to the RuO₂-crystalline phase in a stoichiometric state after post-deposition annealing; this phase can act as an oxygen-capture layer. Therefore, it appears that the electrical properties of the Ru/TiN/poly-Si/Si contact system are better than those of the RuO_x/TiN/poly-Si/Si contact system.     

Measurements and correlation of effect of cosolvents on the solubilities of complex molecules in supercritical carbon dioxide

A new transparent microscale circulation-type high pressure equilibrium cell with on-line sampling was devised. With this apparatus, experimental solubility of molecularly complex species such as steroids (cholesterol, stigmasterol and ergosterol) and fatty acids (palmitic acid and stearic acid) in supercritical carbon dioxide(sc-C0₂) were measured. Also, to find an appropriate substance for enhancing both the polarity and the solubility power of the SC-CO₂ solvent, we arbitrarily selected three polar substances such as acetone, methanol and water and the effect of these cosolvents on the solubility of solutes in SC-CO₂ are examined. The supercritical phase equilibrium data of solute-cosolvent-sc-CO₂ systems were quantitatively correlated using a new equation of state based on the lattice fluid theory incorporated with the concept of multibody interaction. We found that the addition of tracer amount of acetone or methanol to SC-CO₂ enhances the solubility of all solutes about thirty to sixty times when compared with the case of pure sc-CO₂ However, for the case of cosolvent water, no further enhancement of the solubility of solutes was realized. Also, the versatile fittability of the equation of state proposed in this work was demonstrated with the newly measured ternary supercritical equilibrium data.     

Oxidative regeneration of sulfided sorbent by H2S without emission of SO2

Much SO₂, another perilous air pollutant, was emitted during the oxidative regeneration of sulfided sorbent by H₂S. In order to prevent emission of SO₂, we carried out oxidative regeneration with the physical mixture of CaO and sulfided sorbent and investigated the effect of regeneration temperature and oxygen concentration on the reactivity of CaO with S0₂. The effluent gases were analyzed by G.C. and the properties of sorbent were characterized by XRD. SEM, TG/DTA and EPMA. Deterioration of reactivity of CaO with S0₂ resulted in increment of emission of SO₁₂ due to the structural changes of CaO above 750°C and that at 850°C was more severe. Furthermore EPMA and XRD analysis revealed that product layer diffusion through the solid product, CaSO₄, was the rate limiting step for CaO sulfidation. The reaction of CaO w:.th SO₂ was first order approximately and that was accelerated by high O₂ concentration.     

Feasibility of fishmeal replacement by shrimp head silage protein hydrolysate in Nile tilapia (Oreochromis niloticus L) diets

This study provides information on the use of shrimp head silage protein hydrolysate (SPH) as an alternative protein source for tilapia feeding. Six diets (28% protein, 12% lipid) were prepared where fishmeal protein was replaced at levels of 0 (control), 10, 15, 20, 25 and 30% with the hydrolysate. The diets were supplied to Nile tilapia fry (338 mg initial weight) stocked in plastic recirculating 20 l tanks (10 animals per tank), with three replicates per treatment. After an 8 week experimental period, fish fed the diets containing 10 and 15% SPH showed significantly better performance in terms of final body weight, weight gain (%), mean daily weight gain (mg day^?1), specific growth ratio and feed conversion ratio than those fed the control diet (fishmeal as protein source) and higher‐SPH diets. It is concluded that shrimp head hydrolysate is a promising alternative protein source for tilapia feeding, improving growth ratio at dietary inclusion levels as high as 15%. In addition, the diets with added shrimp silage protein were well accepted by the fish, which avidly consumed the feed during the experiment. © 2002 Society of Chemical Industry     

NO emission characteristics in counterflow diffusion flame of blended fuel of H2/CO2/Ar

Flame structure and NO emission characteristics in counterflow diffusion flame of blended fuel of H₂/CO₂/Ar have been numerically simulated with detailed chemistry. The combination of H₂, CO₂ and Ar as fuel is selected to clearly display the contribution of hydrocarbon products to flame structure and NO emission characteristics due to the breakdown of CO₂. A radiative heat loss term is involved to correctly describe the flame dynamics especially at low strain rates. The detailed chemistry adopts the reaction mechanism of GRI 2.11, which consists of 49 species and 279 elementary reactions. All mechanisms including thermal, NO₂, N₂O and Fenimore are taken into account to separately evaluate the effects of CO₂ addition on NO emission characteristics. The increase of added CO₂ quantity causes flame temperature to fall since at high strain rates a diluent effect is prevailing and at low strain rates the breakdown of CO₂ produces relatively populous hydrocarbon products and thus the existence of hydrocarbon products inhibits chain branching. It is also found that the contribution of NO production by N₂O and NO₂ mechanisms are negligible and that thermal mechanism is concentrated on only the reaction zone. As strain rate and CO₂ quantity increase, NO production is remarkably augmented. Copyright © 2002 John Wiley & Sons, Ltd.     

An EM‐based adaptive multiple target tracking filter

Tracking targets of interest is one of the major research areas in radar surveillance systems. We formulate the problem as incomplete data estimation and apply EM to the MAP estimate. The resulting filter has a recursive structure analogous to the Kalman filter. The advantage is that the measurement‐update deals with multiple measurements in parallel and the parameter‐update estimates the system parameters on the fly. Experiments tracking separate targets in parallel show that tracking maintenance ratio of the proposed system is better than that of NNF and RMS position error is smaller than that of PDAF. Also, the system parameters are correctly obtained even from incorrect initial values. Copyright © 2001 John Wiley & Sons, Ltd.